FCC ID JVPWDC30R
InstaShow X Host
by Benq Corporation
Grantee Code: JVP Product Code: WDC30R
Latest application date: 2022-03-17
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Original Equipment | 2022-03-17 |
| 2412-2462 MHz | Original Equipment | 2022-03-17 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| WDC30R- User manual_1_20220314 | Users Manual | 2022-03-17 | PDF 1.4 MB |
| WDC30R- User manual_2_20220314 | Users Manual | 2022-03-17 | PDF 2.2 MB |
| WDC30R- Inpho-1 | Internal Photos | 2022-03-17 | PDF 3.6 MB |
| WDC30R- Inpho-2 | Internal Photos | 2022-03-17 | PDF 2.5 MB |
| WDC30R- Expho | External Photos | 2022-03-17 | PDF 1.1 MB |
| WDC30R- Label | ID Label/Location Info | 2022-03-17 | PDF 433.3 KB |
| WDC30R- Tsup | Test Setup Photos | 2022-03-17 | PDF 726.3 KB |
| WDC30R- TestRpt_15.247_20220316 | Test Report | 2022-03-17 | PDF 2.7 MB |
| WDC30R- TestRpt_15.407_20220316 | Test Report | 2022-03-17 | PDF 2.9 MB |
| WDC30R- ATTESTATION - 0310 | Attestation Statements | 2022-03-17 | PDF 79.8 KB |
| WDC30THS- UNII Declaration letter_FCC | Attestation Statements | 2022-03-17 | PDF 79 KB |
| WDC30R - Confidentiality Request.docx_20220316 | Cover Letter(s) | 2022-03-17 | PDF 80 KB |
| WDC30R- Declaration of authorization - 0310 | Cover Letter(s) | 2022-03-17 | PDF 75.8 KB |
| WDC30R- RFExp_20220314 | RF Exposure Info | 2022-03-17 | PDF 306.4 KB |
| Confidential_WDC30R- Block diagram Metadata only | Block Diagram | PDF 220.7 KB | |
| Confidential_WDC30R- Schem Metadata only | Schematics | PDF 956 KB | |
| Confidential_WDC30R- Operation Description_R_20220316 Metadata only | Operational Description | PDF 204.6 KB |
Application Information
| Application ID | v4fwwa8U67v6eSonK+Aqqg== |
|---|---|
| Final Action Date | 2022-03-17 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0006817563 |
| Model | WDC30R |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | InstaShow X Host |
| Responsible Party | Wenny Lan, Sr. Director, System & Product Regulatory, Wenny.Lan@BenQ.com  , +886-2-2658-8800 |
| Technical Contact | Annie Liu, DEKRA Testing and Certification Co., Ltd., annie-an.liu@dekra.com  |
| Test Firm | Mirenda Liao, DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou, mirenda.liao@dekra.com , +886-2-2602-7968 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is conducted. Device is an 802.11a/n/ac/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. The antennas used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF exposure compliance. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode and contains 2.4GHz WLAN transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| v4fwwa8U67v6eSonK+Aqqg== | 2022-03-17 | Original Equipment |
| kCr+UXstwyeyaynqf3vwgQ== | 2022-03-17 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application v4fwwa8U67v6eSonK+Aqqg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/17/2022 Application Dated: 03/17/2022 |
| Benq Corporation |
| 16 Jihu Road, Neihu, Taipei 114, Taiwan |
| Taipei, 114 Taiwan |
| Attention: Wenny Lan , Sr. Director, System & Product Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | JVPWDC30R |
| Name of Grantee: | Benq Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | InstaShow X Host |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.2854 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.3343 |
| Power Output listed is conducted. Device is an 802.11a/n/ac/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. The antennas used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF exposure compliance. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode and contains 2.4GHz WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application v4fwwa8U67v6eSonK+Aqqg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Benq Corporation 16 Jihu Road, Neihu, Taipei 114, Taiwan Taipei, 114 Taiwan |
Date of Grant: 03/17/2022 Application Dated: 03/17/2022 |
| Attention: Wenny Lan , Sr. Director, System & Product Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | JVPWDC30R |
| Name of Grantee: | Benq Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | InstaShow X Host |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.2854 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.3343 |
| Power Output listed is conducted. Device is an 802.11a/n/ac/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. The antennas used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF exposure compliance. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode and contains 2.4GHz WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/17/2022 Application Dated: 03/17/2022 |
| Benq Corporation |
| 16 Jihu Road, Neihu, Taipei 114, Taiwan |
| Taipei, 114 Taiwan |
| Attention: Wenny Lan , Sr. Director, System & Product Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | JVPWDC30R |
| Name of Grantee: | Benq Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | InstaShow X Host |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.7656 |
| Power Output listed is conducted. Device is an 802.11b/g/n/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. The antennas used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode and contains 5GHz UNII transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application kCr+UXstwyeyaynqf3vwgQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Benq Corporation 16 Jihu Road, Neihu, Taipei 114, Taiwan Taipei, 114 Taiwan |
Date of Grant: 03/17/2022 Application Dated: 03/17/2022 |
| Attention: Wenny Lan , Sr. Director, System & Product Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | JVPWDC30R |
| Name of Grantee: | Benq Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | InstaShow X Host |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.7656 |
| Power Output listed is conducted. Device is an 802.11b/g/n/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. The antennas used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode and contains 5GHz UNII transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |