FCC ID K44371301

This application does not exist.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

JVC KENWOOD Corporation Communication Equipment Division 1-16-2, Hakusan, Midori-ku Yokohama-shi, Kanagawa-ken, Japan

Date of Grant: 05/05/2008 Application Dated: 03/27/2008

Attention: Tamaki Shimamura , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	K44371301
Name of Grantee:	JVC KENWOOD Corporation
Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	VHF DIGITAL BASE-REPEATER
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BC EF	22, 74, 90	150.8  -  154.0	5.0	1.5  PM	16K0F3E
BC EF	22, 74, 90.210	150.8  -  154.0	5.0	1.5  PM	11K0F3E
BC EF	22, 74, 90.210	150.8  -  154.0	5.0	0.5  PM	11K0F3E
BC EF	22, 74, 90.210	150.8  -  154.0	5.0	1.5  PM	8K30F1E
BC EF	22, 74, 90.210	150.8  -  154.0	5.0	1.5  PM	8K30F1D
BC EF	22, 74, 90.210	150.8  -  154.0	5.0	1.5  PM	8K30F7W
BC EF	22, 74, 90.210	150.8  -  154.0	5.0	0.5  PM	8K30F1E
BC EF	22, 74, 90.210	150.8  -  154.0	5.0	0.5  PM	8K30F1D
BC EF	22, 74, 90.210	150.8  -  154.0	5.0	0.5  PM	4K00F1E
BC EF	22, 74, 90.210	150.8  -  154.0	5.0	0.5  PM	4K00F1D
BC EF	22, 74, 90.210	150.8  -  154.0	5.0	0.5  PM	4K00F7W
BC EF	22, 74, 90.210	150.8  -  154.0	5.0	0.5  PM	4K00F2D
BC EF	22, 74, 90	150.8  -  154.0	5.0	0.5  PM	16K0F3E
BC EF	22, 74, 90.210	150.8  -  154.0	5.0	0.5  PM	8K30F7W

Power output listed is measured at the antenna terminals. Occupational/Controlled MPE evaluation covers fixed-mounted and mobile operation for use with a 2.1 dBi antenna and a duty factor not exceeding 50%. The antenna must be installed to provide a separation distance of at least 44.25 cm from all persons during use with a duty factor not exceeding 50%. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

BC:	The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF:	This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

TCB Grant - Application MfbO/7HbhkR5jRoiZYKXow==

Mail To:

Izumi Mitsui, GMAP Team Leader

Intertek Japan K.K.

2-3-18, Namamugi Tsurumi

Yokohama, 230-0052

Japan

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

MET Laboratories, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230-3432

Date of Grant: 03/13/2008 Application Dated: 03/13/2008

JVC KENWOOD Corporation

Communication Equipment Division

1-16-2, Hakusan, Midori-ku

Yokohama-shi, Kanagawa-ken, Japan

Attention: Tamaki Shimamura , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	K44371301
Name of Grantee:	JVC KENWOOD Corporation
Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	VHF Digital base repeater

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BC EF	22, 74, 90	150.8  -  154.0	5.0	1.5  PM	16K0F3E
BC EF	22, 74, 90.210	150.8  -  154.0	5.0	1.5  PM	11K0F3E
BC EF	22, 74, 90.210	150.8  -  154.0	5.0	1.5  PM	8K30F1E
BC EF	22, 74, 90.210	150.8  -  154.0	5.0	1.5  PM	8K30F1D
BC EF	22, 74, 90.210	150.8  -  154.0	5.0	1.5  PM	8K30F7W

Power output listed is measured at the antenna terminals. Occupational/Controlled MPE evaluation covers fixed-mounted and mobile operation for use with a 2.1 dBi antenna and a duty factor not exceeding 50%. The antenna must be installed to provide a separation distance of at least 44.25 cm from all persons during use with a duty factor not exceeding 50%. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

BC:	The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF:	This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

JVC KENWOOD Corporation Communication Equipment Division 1-16-2, Hakusan, Midori-ku Yokohama-shi, Kanagawa-ken, Japan

Date of Grant: 03/13/2008 Application Dated: 03/13/2008

Attention: Tamaki Shimamura , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	K44371301
Name of Grantee:	JVC KENWOOD Corporation
Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	VHF Digital base repeater
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BC EF	22, 74, 90	150.8  -  154.0	5.0	1.5  PM	16K0F3E
BC EF	22, 74, 90.210	150.8  -  154.0	5.0	1.5  PM	11K0F3E
BC EF	22, 74, 90.210	150.8  -  154.0	5.0	1.5  PM	8K30F1E
BC EF	22, 74, 90.210	150.8  -  154.0	5.0	1.5  PM	8K30F1D
BC EF	22, 74, 90.210	150.8  -  154.0	5.0	1.5  PM	8K30F7W

Power output listed is measured at the antenna terminals. Occupational/Controlled MPE evaluation covers fixed-mounted and mobile operation for use with a 2.1 dBi antenna and a duty factor not exceeding 50%. The antenna must be installed to provide a separation distance of at least 44.25 cm from all persons during use with a duty factor not exceeding 50%. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

BC:	The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF:	This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

TCB Grant - Application dhuENiaUl3iQoT1s4m/s0g==

EAS Grant - Application dhuENiaUl3iQoT1s4m/s0g==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

JVC KENWOOD Corporation Communications Systems Division 1-16-2, Hakusan, Midori-ku Yokohama-shi, Kanagawa-ken, Japan

Date of Grant: 01/08/2010 Application Dated: 11/11/2009

Attention: Tamaki Shimamura , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	K44371301
Name of Grantee:	JVC KENWOOD Corporation
Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	VHF DIGITAL BASE-REPEATER
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BC EF	22, 74, 90	150.8  -  154.0	5.0	1.0  PM	16K0F3E
BC EF	22, 74, 90.210	150.8  -  154.0	5.0	1.0  PM	11K0F3E
BC EF	22, 74, 90.210	150.8  -  154.0	5.0	1.0  PM	8K30F1E
BC EF	22, 74, 90.210	150.8  -  154.0	5.0	1.0  PM	8K30F1D
BC EF	22, 74, 90.210	150.8  -  154.0	5.0	1.0  PM	8K30F7W
BC EF	22, 74, 90.210	150.8  -  154.0	5.0	1.0  PM	4K00F1E
BC EF	22, 74, 90.210	150.8  -  154.0	5.0	1.0  PM	4K00F1D
BC EF	22, 74, 90.210	150.8  -  154.0	5.0	1.0  PM	4K00F7W
BC EF	22, 74, 90.210	150.8  -  154.0	5.0	1.0  PM	4K00F2D

Power output listed is measured at the antenna terminals. Occupational/Controlled MPE evaluation covers fixed-mounted and mobile operation for use with a 2.1 dBi antenna and a duty factor not exceeding 50%. The antenna must be installed to provide a separation distance of at least 44.25 cm from all persons during use with a duty factor not exceeding 50%. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

BC:	The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF:	This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

Mail To:

Sae Hagino,

Intertek Japan K.K.

2-3-18 Namamugi, Tsurumi-ku,

Yokohama, Kanagawa, 230-0052

Japan