FCC ID K44378600

K44-378600, K44 378600, K44378600, K443786OO

JVC KENWOOD Corporation VHF Digital Transceiver 378600

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: K44378600 is K44. The remaining characters of the FCC ID, 378600, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: VHF Digital Transceiver

App # Purpose Date Unique ID
1 Original Equipment 2007-08-16 2SpK/TKO9O7DEk5cq0wLOw==
2 Original Equipment 2007-08-24 R2J8r1VYmTasvk9CLKt8xQ==
3 Class II Permissive Change 2009-05-19 N63mVOTLtYwLyw/xvoW0/Q==
4 Class II Permissive Change 2018-02-06 dHuH1p+6rftG9qE7dvurxg==

Operating Frequencies

Frequency RangePower OutputToleranceEmission DesignatorRule PartsGrant Notes App #
150-174 MHz30 Watts2ppm4K00F1D22, 74, 90.21BC 1.1
150-174 MHz30 Watts2ppm4K00F7W22, 74, 90.21BC 1.11
150-174 MHz30 Watts2ppm4K00F2D22, 74, 90.21BC 1.12
150-174 MHz5 Watts2ppm16K0F3E22, 74, 9BE 1.13
150-174 MHz5 Watts2ppm14K4F1D22, 74, 9BE 1.14
150-174 MHz5 Watts2ppm11K0F3E22, 74, 90.21BE 1.15
150-174 MHz5 Watts2ppm8K30F1E22, 74, 90.21BE 1.16
150-174 MHz5 Watts2ppm8K30F1D22, 74, 90.21BE 1.17
150-174 MHz5 Watts2ppm8K30F7W22, 74, 90.21BE 1.18
150-174 MHz5 Watts2ppm8K10F1E22, 74, 90.21BE 1.19
150-174 MHz5 Watts2ppm8K10F1D22, 74, 90.21BE 1.2
150-174 MHz5 Watts2ppm4K00F1E22, 74, 90.21BE 1.21
150-174 MHz5 Watts2ppm4K00F1D22, 74, 90.21BE 1.22
150-174 MHz5 Watts2ppm4K00F7W22, 74, 90.21BE 1.23
150-174 MHz5 Watts2ppm4K00F2D22, 74, 90.21BE 1.24
150-174 MHz30 Watts2ppm11K0F3E22, 74, 90.21BC 1.3
150-174 MHz30 Watts2ppm8K30F1E22, 74, 90.21BC 1.4
150-174 MHz30 Watts2ppm8K30F1D22, 74, 90.21BC 1.5
150-174 MHz30 Watts2ppm8K30F7W22, 74, 90.21BC 1.6
150-174 MHz30 Watts2ppm8K10F1E22, 74, 90.21BC 1.7
150-174 MHz30 Watts2ppm8K10F1D22, 74, 90.21BC 1.8
150-174 MHz30 Watts2ppm4K00F1E22, 74, 90.21BC 1.9
150-174 MHz30 Watts1ppm4K00F7W22, 74, 90.21BC, EF 3.1
150-174 MHz30 Watts1ppm4K00F2D22, 74, 90.21BC, EF 3.11
150-174 MHz30 Watts1ppm11K0F3E22, 74, 90.21BC, EF 3.12
150-174 MHz5 Watts1ppm16K0F3E22, 74, 9BE, EF 3.13
150-174 MHz5 Watts1ppm14K4F1D22, 74, 9BE, EF 3.14
150-174 MHz5 Watts1ppm11K0F3E22, 74, 90.21BE, EF 3.15
150-174 MHz5 Watts1ppm8K30F1E22, 74, 90.21BE, EF 3.16
150-174 MHz5 Watts1ppm8K30F1D22, 74, 90.21BE, EF 3.17
150-174 MHz5 Watts1ppm8K30F7W22, 74, 90.21BE, EF 3.18
150-174 MHz5 Watts1ppm8K10F1E22, 74, 90.21BE, EF 3.19
150-174 MHz5 Watts1ppm8K10F1D22, 74, 90.21BE, EF 3.2
150-174 MHz5 Watts1ppm4K00F1E22, 74, 90.21BE, EF 3.21
150-174 MHz5 Watts1ppm4K00F1D22, 74, 90.21BE, EF 3.22
150-174 MHz5 Watts1ppm4K00F7W22, 74, 90.21BE, EF 3.23
150-174 MHz5 Watts1ppm4K00F2D22, 74, 90.21BE, EF 3.24
150-174 MHz30 Watts1ppm8K30F1E22, 74, 90.21BC, EF 3.3
150-174 MHz30 Watts1ppm8K30F1D22, 74, 90.21BC, EF 3.4
150-174 MHz30 Watts1ppm8K30F7W22, 74, 90.21BC, EF 3.5
150-174 MHz30 Watts1ppm8K10F1E22, 74, 90.21BC, EF 3.6
150-174 MHz30 Watts1ppm8K10F1D22, 74, 90.21BC, EF 3.7
150-174 MHz30 Watts1ppm4K00F1E22, 74, 90.21BC, EF 3.8
150-174 MHz30 Watts1ppm4K00F1D22, 74, 90.21BC, EF 3.9
150-174 MHz30 Watts2ppm4K00F1D22, 74, 90.21BC, EF 2.1
150-174 MHz30 Watts2ppm4K00F7W22, 74, 90.21BC, EF 2.11
150-174 MHz30 Watts2ppm4K00F2D22, 74, 90.21BC, EF 2.12
150-174 MHz5 Watts2ppm16K0F3E22, 74, 9BE, EF 2.13
150-174 MHz5 Watts2ppm14K4F1D22, 74, 9BE, EF 2.14
150-174 MHz5 Watts2ppm11K0F3E22, 74, 90.21BE, EF 2.15
150-174 MHz5 Watts2ppm8K30F1E22, 74, 90.21BE, EF 2.16
150-174 MHz5 Watts2ppm8K30F1D22, 74, 90.21BE, EF 2.17
150-174 MHz5 Watts2ppm8K30F7W22, 74, 90.21BE, EF 2.18
150-174 MHz5 Watts2ppm8K10F1E22, 74, 90.21BE, EF 2.19
150-174 MHz5 Watts2ppm8K10F1D22, 74, 90.21BE, EF 2.2
150-174 MHz5 Watts2ppm4K00F1E22, 74, 90.21BE, EF 2.21
150-174 MHz5 Watts2ppm4K00F1D22, 74, 90.21BE, EF 2.22
150-174 MHz5 Watts2ppm4K00F7W22, 74, 90.21BE, EF 2.23
150-174 MHz5 Watts2ppm4K00F2D22, 74, 90.21BE, EF 2.24
150-174 MHz30 Watts2ppm11K0F3E22, 74, 90.21BC, EF 2.3
150-174 MHz30 Watts2ppm8K30F1E22, 74, 90.21BC, EF 2.4
150-174 MHz30 Watts2ppm8K30F1D22, 74, 90.21BC, EF 2.5
150-174 MHz30 Watts2ppm8K30F7W22, 74, 90.21BC, EF 2.6
150-174 MHz30 Watts2ppm8K10F1E22, 74, 90.21BC, EF 2.7
150-174 MHz30 Watts2ppm8K10F1D22, 74, 90.21BC, EF 2.8
150-174 MHz30 Watts2ppm4K00F1E22, 74, 90.21BC, EF 2.9
150-174 MHz30 Watts2ppm4K00F1D22, 74, 90.21BC, EF, ES 4.1
150-174 MHz5 Watts2ppm8K10F1D22, 74, 90.21BC, EF, ES 4.2
150-174 MHz30 Watts2ppm11K0F3E22, 74, 90.21BC, EF 4.3
150-174 MHz30 Watts2ppm8K30F1E22, 74, 90.21BC, EF, ES 4.4
150-174 MHz30 Watts2ppm8K30F1D22, 74, 90.21BC, EF, ES 4.5
150-174 MHz30 Watts2ppm8K30F7W22, 74, 90.21BC, EF, ES 4.6
150-174 MHz30 Watts2ppm8K10F1E22, 74, 90.21BC, EF, ES 4.7
150-174 MHz30 Watts2ppm8K10F1D22, 74, 90.21BC, EF, ES 4.8
150-174 MHz30 Watts2ppm4K00F1E22, 74, 90.21BC, EF, ES 4.9
150-174 MHz30 Watts2ppm4K00F7W22, 74, 90.21BC, EF, ES 4.11
150-174 MHz30 Watts2ppm4K00F2D22, 74, 90.21BC, EF, ES 4.12
150-174 MHz5 Watts2ppm16K0F3E22, 74, 8BE, EF 4.13
150-174 MHz5 Watts2ppm14K4F1D22, 74, 9BE, EF 4.14
150-174 MHz5 Watts2ppm11K0F3E22, 74, 90.21BE, EF 4.15
150-174 MHz5 Watts2ppm8K30F1E22, 74, 90.21BC, EF, ES 4.16
150-174 MHz5 Watts2ppm8K30F1D22, 74, 90.21BC, EF, ES 4.17
150-174 MHz5 Watts2ppm8K30F7W22, 74, 90.21BC, EF, ES 4.18
150-174 MHz5 Watts2ppm8K10F1E22, 74, 90.21BC, EF, ES 4.19
150-174 MHz5 Watts2ppm4K00F1E22, 74, 90.21BC, EF, ES 4.21
150-174 MHz5 Watts2ppm4K00F1D22, 74, 90.21BC, EF, ES 4.22
150-174 MHz5 Watts2ppm4K00F7W22, 74, 90.21BC, EF, ES 4.23
150-174 MHz5 Watts2ppm4K00F2D22, 74, 90.21BC, EF, ES 4.24

Exhibits

Available Exhibits

App #Document Type Submitted
Available
4 NX-700-K_FCC_PC_II_LetterCover Letter(s)
Adobe Acrobat PDF (97 kB)
2018-02-06
2018-02-06
4 NX-700-K_FCC_Justify_LetterCover Letter(s)
Adobe Acrobat PDF (35 kB)
2018-02-06
2018-02-06
4 NX-700-K_FCC_Attestation LetterAttestation Statements
Adobe Acrobat PDF (37 kB)
2018-02-06
2018-02-06
4 FCC_BehalfCover Letter(s)
Adobe Acrobat PDF (38 kB)
2018-02-06
2018-02-06
4 Cross Reference Table for K44378600Test Report
Adobe Acrobat PDF (158 kB)
2018-02-06
2018-02-06
3 Frequency stability data page40Test Report
Adobe Acrobat PDF (377 kB)
2009-05-19
2009-05-19
3 Letter for Permissive ChangeCover Letter(s)
Adobe Acrobat PDF (44 kB)
2009-04-06
2009-05-19
3 Letter LoACover Letter(s)
Adobe Acrobat PDF (45 kB)
2009-04-06
2009-05-19
2 Justification LetterCover Letter(s)
Adobe Acrobat PDF (39 kB)
2007-09-11
2007-08-24
2 ConfidentialityCover Letter(s)
Adobe Acrobat PDF (34 kB)
2007-08-24
2007-08-24
2 Test ReportTest Report
Adobe Acrobat PDF (376 kB)
2007-08-24
2007-08-24
2 RF ExposureRF Exposure Info
Adobe Acrobat PDF (109 kB)
2007-08-24
2007-08-24
2 RF Exposure Info MPERF Exposure Info
Adobe Acrobat PDF (24 kB)
2007-08-24
2007-08-24
2 labelID Label/Location Info
Adobe Acrobat PDF (156 kB)
2007-08-24
2007-08-24
2 internalInternal Photos
Adobe Acrobat PDF (117 kB)
2007-08-24
2007-08-24
2 manualUsers Manual
Adobe Acrobat PDF (107 kB)
2007-08-24
2007-08-24
2 test setup photosTest Setup Photos
Adobe Acrobat PDF (312 kB)
2007-08-24
2007-08-24
2 external photosExternal Photos
Adobe Acrobat PDF (151 kB)
2007-08-24
2007-08-24
2 agent authCover Letter(s)
Adobe Acrobat PDF (43 kB)
2007-08-24
2007-08-24
1 LT ConfidentialityCover Letter(s)
Adobe Acrobat PDF (30 kB)
2007-07-17
1 Agent AuthorizationCover Letter(s)
Adobe Acrobat PDF (43 kB)
2007-07-17

APP # 4 (2018-02-06)

App # Document Type Submitted
Available
4 NX-700-K_FCC_PC_II_Letter Cover Letter(s)
Adobe Acrobat PDF (97 kB)
2018-02-06 00:00:00
2018-02-06 00:00:00
4 NX-700-K_FCC_Justify_Letter Cover Letter(s)
Adobe Acrobat PDF (35 kB)
2018-02-06 00:00:00
2018-02-06 00:00:00
4 NX-700-K_FCC_Attestation Letter Attestation Statements
Adobe Acrobat PDF (37 kB)
2018-02-06 00:00:00
2018-02-06 00:00:00
4 FCC_Behalf Cover Letter(s)
Adobe Acrobat PDF (38 kB)
2018-02-06 00:00:00
2018-02-06 00:00:00
4 Cross Reference Table for K44378600 Test Report
Adobe Acrobat PDF (158 kB)
2018-02-06 00:00:00
2018-02-06 00:00:00

APP # 3 (2009-05-19)

App # Document Type Submitted
Available
3 Frequency stability data page40 Test Report
Adobe Acrobat PDF (377 kB)
2009-05-19 00:00:00
2009-05-19 00:00:00
3 Letter for Permissive Change Cover Letter(s)
Adobe Acrobat PDF (44 kB)
2009-04-06 00:00:00
2009-05-19 00:00:00
3 Letter LoA Cover Letter(s)
Adobe Acrobat PDF (45 kB)
2009-04-06 00:00:00
2009-05-19 00:00:00

APP # 2 (2007-08-24)

App # Document Type Submitted
Available
2 Justification Letter Cover Letter(s)
Adobe Acrobat PDF (39 kB)
2007-09-11 00:00:00
2007-08-24 00:00:00
2 Confidentiality Cover Letter(s)
Adobe Acrobat PDF (34 kB)
2007-08-24 00:00:00
2007-08-24 00:00:00
2 Test Report Test Report
Adobe Acrobat PDF (376 kB)
2007-08-24 00:00:00
2007-08-24 00:00:00
2 RF Exposure RF Exposure Info
Adobe Acrobat PDF (109 kB)
2007-08-24 00:00:00
2007-08-24 00:00:00
2 RF Exposure Info MPE RF Exposure Info
Adobe Acrobat PDF (24 kB)
2007-08-24 00:00:00
2007-08-24 00:00:00
2 label ID Label/Location Info
Adobe Acrobat PDF (156 kB)
2007-08-24 00:00:00
2007-08-24 00:00:00
2 internal Internal Photos
Adobe Acrobat PDF (117 kB)
2007-08-24 00:00:00
2007-08-24 00:00:00
2 manual Users Manual
Adobe Acrobat PDF (107 kB)
2007-08-24 00:00:00
2007-08-24 00:00:00
2 test setup photos Test Setup Photos
Adobe Acrobat PDF (312 kB)
2007-08-24 00:00:00
2007-08-24 00:00:00
2 external photos External Photos
Adobe Acrobat PDF (151 kB)
2007-08-24 00:00:00
2007-08-24 00:00:00
2 agent auth Cover Letter(s)
Adobe Acrobat PDF (43 kB)
2007-08-24 00:00:00
2007-08-24 00:00:00

APP # 1 (2007-08-16)

App # Document Type Submitted
Available
1 LT Confidentiality Cover Letter(s)
Adobe Acrobat PDF (30 kB)
2007-07-17 00:00:00
N/A
1 Agent Authorization Cover Letter(s)
Adobe Acrobat PDF (43 kB)
2007-07-17 00:00:00
N/A
1 Test Setup Photo Test Setup Photos
Adobe Acrobat PDF (312 kB)
2007-07-17 00:00:00
N/A
1 Internal Photos Internal Photos
Adobe Acrobat PDF (117 kB)
2007-07-17 00:00:00
N/A
1 RF Information RF Exposure Info
Adobe Acrobat PDF (109 kB)
2007-07-17 00:00:00
N/A

APP # 2 (2007-08-24)

App # Document Type Submitted
Available
2 circuit diagram Operational Description
Adobe Acrobat PDF (36 kB)
2007-08-24 00:00:00
N/A

APP # 1 (2007-08-16)

App # Document Type Submitted
Available
1 Block Diagram Block Diagram
Adobe Acrobat PDF (58 kB)
2007-07-17 00:00:00
N/A

APP # 2 (2007-08-24)

App # Document Type Submitted
Available
2 Parts List Parts List/Tune Up Info
Adobe Acrobat PDF (18 kB)
2007-08-24 00:00:00
N/A
2 Tuneing Procedure Parts List/Tune Up Info
Adobe Acrobat PDF (71 kB)
2007-08-24 00:00:00
N/A

APP # 1 (2007-08-16)

App # Document Type Submitted
Available
1 User Manual Users Manual
Adobe Acrobat PDF (107 kB)
2007-07-17 00:00:00
N/A

APP # 2 (2007-08-24)

App # Document Type Submitted
Available
2 schematics Schematics
Adobe Acrobat PDF (538 kB)
2007-08-24 00:00:00
N/A

APP # 1 (2007-08-16)

App # Document Type Submitted
Available
1 Test Report Test Report
Adobe Acrobat PDF (376 kB)
2007-07-17 00:00:00
N/A
1 External Photos External Photos
Adobe Acrobat PDF (151 kB)
2007-07-17 00:00:00
N/A
1 Parts List Parts List/Tune Up Info
Adobe Acrobat PDF (12 kB)
2007-07-17 00:00:00
N/A

APP # 2 (2007-08-24)

App # Document Type Submitted
Available
2 blk diagram Block Diagram
Adobe Acrobat PDF (58 kB)
2007-08-24 00:00:00
N/A

APP # 1 (2007-08-16)

App # Document Type Submitted
Available
1 Tuning Procedure Parts List/Tune Up Info
Adobe Acrobat PDF (71 kB)
2007-07-17 00:00:00
N/A
1 Label ID Label/Location Info
Adobe Acrobat PDF (156 kB)
2007-07-17 00:00:00
N/A
1 Schematics Schematics
Adobe Acrobat PDF (538 kB)
2007-07-17 00:00:00
N/A
1 Circuit Description Operational Description
Adobe Acrobat PDF (36 kB)
2007-07-17 00:00:00
N/A
1 Active Devices Parts List/Tune Up Info
Adobe Acrobat PDF (18 kB)
2007-07-17 00:00:00
N/A
1 MPE Calculation RF Exposure Info
Adobe Acrobat PDF (24 kB)
2007-07-17 00:00:00
N/A

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: JVC KENWOOD Corporation
FCC Registration Number (FRN): 0008154510
Alphanumeric FCC ID: K44378600
Unique Application Identifier: 2SpK/TKO9O7DEk5cq0wLOw==
Line one: Communication Equipment Division
Line two: 1-16-2, Hakusan, Midori-ku
City: Yokohama-shi, Kanagawa-ken
State: N/A
Country: Japan

TCB Information
TCB Application Email Address: tcbinfo@metlabs.com
TCB Scope: B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97

FCC ID
Grantee Code: K44
Product Code: 378600

Person at the applicant's address to receive grant or for contact
Name: Tamaki Shimamura
Title: Manager
Telephone Number: 045-939-6254 Extension:
Fax Number: 045-939-6261
Email: shimamura.tamaki@jvckenwood.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   TNB - Licensed Non-Broadcast Station Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): VHF Digital Transceiver

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Intertek Japan K.K. Kashima Site
First Name:   Takeshi
Last Name:   Yamanaka
Telephone Number: 81-479-40-1097 Extension:
Fax Number:  81-479-46-1788
E-mail:  Takeshi.Yamanaka@intertek.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Reissued by FCC
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Samantha Sharbonda
Title of authorized signature:  TCB Administrator

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: JVC KENWOOD Corporation
FCC Registration Number (FRN): 0008154510
Alphanumeric FCC ID: K44378600
Unique Application Identifier: R2J8r1VYmTasvk9CLKt8xQ==
Line one: Communication Equipment Division
Line two: 1-16-2, Hakusan, Midori-ku
City: Yokohama-shi, Kanagawa-ken
State: N/A
Country: Japan

TCB Information
TCB Application Email Address: tcbinfo@metlabs.com
TCB Scope: B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97

FCC ID
Grantee Code: K44
Product Code: 378600

Person at the applicant's address to receive grant or for contact
Name: Tamaki Shimamura
Title: Manager
Telephone Number: 045-939-6254 Extension:
Fax Number: 045-939-6261
Email: shimamura.tamaki@jvckenwood.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   TNB - Licensed Non-Broadcast Station Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): VHF Digital Transceiver

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Intertek Japan K.K. Kashima Site
First Name:   Takeshi
Last Name:   Yamanaka
Telephone Number: 81-479-40-1097 Extension:
Fax Number:  81-479-46-1788
E-mail:  Takeshi.Yamanaka@intertek.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power output listed is measured at the antenna terminals. Occupational/Controlled MPE evaluation covers fixed-mounted and mobile operation from 1W up to 30W for use with a 2.1 dBi antenna and a duty factor not exceeding 50%. The antenna must be installed to provide a separation distance of at least 108.4 cm from all persons during use with a duty factor not exceeding 50%. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Jennifer Sanchez
Title of authorized signature:  TCB Administrator

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: JVC KENWOOD Corporation
FCC Registration Number (FRN): 0008154510
Alphanumeric FCC ID: K44378600
Unique Application Identifier: N63mVOTLtYwLyw/xvoW0/Q==
Line one: Communication Equipment Division
Line two: 1-16-2, Hakusan, Midori-ku
City: Yokohama-shi, Kanagawa-ken
State: N/A
Country: Japan

Alternative Applicant Contact

Firm Name: Intertek Japan K.K.
Name: Izumi Mitsui
Applicant Title: Sales & Marketing
Line one: 2-3-18 Namamugi, Tsurumi-ku
City: Yokohama
Country: Japan
Zip Code: 230-0052

TCB Information

FCC ID
Grantee Code: K44
Product Code: 378600

Person at the applicant's address to receive grant or for contact
Name: Tamaki Shimamura
Title: Manager
Telephone Number: 045-939-6254 Extension:
Fax Number: 045-939-6261
Email: shimamura.tamaki@jvckenwood.com

Technical Contact
Firm Name:
Intertek Japan K.K.
First Name: Izumi
Last Name: Mitsui
Line 1:
2-3-18 Namamugi, Tsurumi-ku
City: Yokohama
Country:
Japan
Zip Code: 230-0052
Telephone Number:
+81 45 508 6742

Extension:
Fax Number: +81 45 511 3345
E-Mail:

Non Technical Contact
Firm Name: Intertek Japan K.K.
First Name: Izumi
Last Name: Mitsui
Line 1: 2-3-18 Namamugi, Tsurumi-ku
City: Yokohama
Country: Japan
Telephone Number: +81 45 508 6742 Extension:
Fax Number: +81 45 511 3345
E-Mail: izumi.mitsui@intertek.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   TNB - Licensed Non-Broadcast Station Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): VHF DIGITAL TRANSCEIVER

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Intertek Japan K.K.(Kashima Laboratory)
First Name:   Kazuo
Last Name:   Gokita
Telephone Number: 81-299-82-8464 Extension:
Fax Number:  81-299-82-8466
E-mail:  kazuo.gokita@intertek.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power output listed is measured at the antenna terminals. Occupational/Controlled MPE evaluation covers fixed-mounted and mobile operation from 1W up to 30W for use with a 2.1 dBi antenna and a duty factor not exceeding 50%. The antenna must be installed to provide a separation distance of at least 108.4 cm from all persons during use with a duty factor not exceeding 50%. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  No

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Izumi
Title of authorized signature:  Mitsui

Complete items below if agent signs the application:

Firm Name:  Intertek Japan K.K.
Name:  Izumi Izumi Izumi
Line 1:  Izumi
Line 2:  Izumi
P.O. Box:  Izumi
City:  Izumi
State:  Izumi
Country:  Izumi
Zip Code:  Izumi
Telephone Number:  +81 45 508 6742
Fax Number:  +81 45 511 3345
E-mail:  izumi.mitsui@intertek.com

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: JVC KENWOOD Corporation
FCC Registration Number (FRN): 0008154510
Alphanumeric FCC ID: K44378600
Unique Application Identifier: dHuH1p+6rftG9qE7dvurxg==
Line one: Communications Systems Division
Line two: 1-16-2, Hakusan, Midori-ku
City: Yokohama-shi, Kanagawa-ken
State: N/A
Country: Japan

TCB Information
TCB Application Email Address: kent@hctamerica.com;charvey@ieee.org
TCB Scope: B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97

FCC ID
Grantee Code: K44
Product Code: 378600

Person at the applicant's address to receive grant or for contact
Name: Tamaki Shimamura
Title: Manager
Telephone Number: 045-939-6254 Extension:
Fax Number: 045-939-6261
Email: shimamura.tamaki@jvckenwood.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   TNB - Licensed Non-Broadcast Station Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): VHF DIGITAL TRANSCEIVER

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Intertek Japan K.K.(Kashima Laboratory)
First Name:   Junichi
Last Name:   Okada
Telephone Number: 81-299-82-8464 Extension:
Fax Number:  81-299-82-8466
E-mail:  junichi.okada@intertek.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change. Power output listed is measured at the antenna terminals. Occupational/Controlled MPE evaluation covers fixed-mounted and mobile operation from 1W up to 30W for use with a 2.1 dBi antenna and a duty factor not exceeding 50%. The antenna must be installed to provide a separation distance of at least 108.4 cm from all persons during use with a duty factor not exceeding 50%. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  SunHee Kim
Title of authorized signature:  Agent

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

Grants

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  HCT America LLC
1726 Ringwood Avenue
San Jose, CA 95131
Date of Grant: 02/06/2018

Application Dated: 02/06/2018
JVC KENWOOD Corporation
Communications Systems Division
1-16-2, Hakusan, Midori-ku
Yokohama-shi, Kanagawa-ken,
Japan
 
Attention: Tamaki Shimamura , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  K44378600
Name of Grantee:  JVC KENWOOD Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: VHF DIGITAL TRANSCEIVER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC EF 22, 74, 80 150.0  -  174.0 30.0 2.0  PM 16K0F3E
BC EF 22, 74, 90 150.0  -  174.0 30.0 2.0  PM 14K4F1D
BC EF 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 11K0F3E
BC EF ES 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 8K30F1E
BC EF ES 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 8K30F1D
BC EF ES 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 8K30F7W
BC EF ES 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 8K10F1E
BC EF ES 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 8K10F1D
BC EF ES 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 4K00F1E
BC EF ES 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 4K00F1D
BC EF ES 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 4K00F7W
BC EF ES 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 4K00F2D
BE EF 22, 74, 80 150.0  -  174.0 5.0 2.0  PM 16K0F3E
BE EF 22, 74, 90 150.0  -  174.0 5.0 2.0  PM 14K4F1D
BE EF 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 11K0F3E
BC EF ES 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 8K30F1E
BC EF ES 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 8K30F1D
BC EF ES 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 8K30F7W
BC EF ES 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 8K10F1E
BC EF ES 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 8K10F1D
BC EF ES 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 4K00F1E
BC EF ES 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 4K00F1D
BC EF ES 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 4K00F7W
BC EF ES 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 4K00F2D

Class II Permissive Change. Power output listed is measured at the antenna terminals. Occupational/Controlled MPE evaluation covers fixed-mounted and mobile operation from 1W up to 30W for use with a 2.1 dBi antenna and a duty factor not exceeding 50%. The antenna must be installed to provide a separation distance of at least 108.4 cm from all persons during use with a duty factor not exceeding 50%. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
BE: The output power is continuously variable from the value listed in this entry to 15%-20% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES: This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

JVC KENWOOD Corporation
Communications Systems Division 1-16-2, Hakusan, Midori-ku
Yokohama-shi, Kanagawa-ken,
Japan
  Date of Grant: 02/06/2018

Application Dated: 02/06/2018
 
Attention: Tamaki Shimamura , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  K44378600
Name of Grantee:  JVC KENWOOD Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: VHF DIGITAL TRANSCEIVER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC EF 22, 74, 80 150.0  -  174.0 30.0 2.0  PM 16K0F3E
BC EF 22, 74, 90 150.0  -  174.0 30.0 2.0  PM 14K4F1D
BC EF 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 11K0F3E
BC EF ES 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 8K30F1E
BC EF ES 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 8K30F1D
BC EF ES 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 8K30F7W
BC EF ES 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 8K10F1E
BC EF ES 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 8K10F1D
BC EF ES 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 4K00F1E
BC EF ES 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 4K00F1D
BC EF ES 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 4K00F7W
BC EF ES 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 4K00F2D
BE EF 22, 74, 80 150.0  -  174.0 5.0 2.0  PM 16K0F3E
BE EF 22, 74, 90 150.0  -  174.0 5.0 2.0  PM 14K4F1D
BE EF 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 11K0F3E
BC EF ES 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 8K30F1E
BC EF ES 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 8K30F1D
BC EF ES 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 8K30F7W
BC EF ES 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 8K10F1E
BC EF ES 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 8K10F1D
BC EF ES 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 4K00F1E
BC EF ES 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 4K00F1D
BC EF ES 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 4K00F7W
BC EF ES 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 4K00F2D

Class II Permissive Change. Power output listed is measured at the antenna terminals. Occupational/Controlled MPE evaluation covers fixed-mounted and mobile operation from 1W up to 30W for use with a 2.1 dBi antenna and a duty factor not exceeding 50%. The antenna must be installed to provide a separation distance of at least 108.4 cm from all persons during use with a duty factor not exceeding 50%. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
BE: The output power is continuously variable from the value listed in this entry to 15%-20% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES: This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

Mail To:


EA943170
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

JVC KENWOOD Corporation
Communication Equipment Division 1-16-2, Hakusan, Midori-ku
Yokohama-shi, Kanagawa-ken,
Japan
  Date of Grant: 05/19/2009

Application Dated: 04/06/2009
 
Attention: Tamaki Shimamura , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  K44378600
Name of Grantee:  JVC KENWOOD Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: VHF DIGITAL TRANSCEIVER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC EF 22, 74, 90 150.0  -  174.0 30.0 1.0  PM 16K0F3E
BC EF 22, 74, 90 150.0  -  174.0 30.0 1.0  PM 14K4F1D
BC EF 22, 74, 90.210 150.0  -  174.0 30.0 1.0  PM 8K30F1E
BC EF 22, 74, 90.210 150.0  -  174.0 30.0 1.0  PM 8K30F1D
BC EF 22, 74, 90.210 150.0  -  174.0 30.0 1.0  PM 8K30F7W
BC EF 22, 74, 90.210 150.0  -  174.0 30.0 1.0  PM 8K10F1E
BC EF 22, 74, 90.210 150.0  -  174.0 30.0 1.0  PM 8K10F1D
BC EF 22, 74, 90.210 150.0  -  174.0 30.0 1.0  PM 4K00F1E
BC EF 22, 74, 90.210 150.0  -  174.0 30.0 1.0  PM 4K00F1D
BC EF 22, 74, 90.210 150.0  -  174.0 30.0 1.0  PM 4K00F7W
BC EF 22, 74, 90.210 150.0  -  174.0 30.0 1.0  PM 4K00F2D
BC EF 22, 74, 90.210 150.0  -  174.0 30.0 1.0  PM 11K0F3E
BE EF 22, 74, 90 150.0  -  174.0 5.0 1.0  PM 16K0F3E
BE EF 22, 74, 90 150.0  -  174.0 5.0 1.0  PM 14K4F1D
BE EF 22, 74, 90.210 150.0  -  174.0 5.0 1.0  PM 11K0F3E
BE EF 22, 74, 90.210 150.0  -  174.0 5.0 1.0  PM 8K30F1E
BE EF 22, 74, 90.210 150.0  -  174.0 5.0 1.0  PM 8K30F1D
BE EF 22, 74, 90.210 150.0  -  174.0 5.0 1.0  PM 8K30F7W
BE EF 22, 74, 90.210 150.0  -  174.0 5.0 1.0  PM 8K10F1E
BE EF 22, 74, 90.210 150.0  -  174.0 5.0 1.0  PM 8K10F1D
BE EF 22, 74, 90.210 150.0  -  174.0 5.0 1.0  PM 4K00F1E
BE EF 22, 74, 90.210 150.0  -  174.0 5.0 1.0  PM 4K00F1D
BE EF 22, 74, 90.210 150.0  -  174.0 5.0 1.0  PM 4K00F7W
BE EF 22, 74, 90.210 150.0  -  174.0 5.0 1.0  PM 4K00F2D

Power output listed is measured at the antenna terminals. Occupational/Controlled MPE evaluation covers fixed-mounted and mobile operation from 1W up to 30W for use with a 2.1 dBi antenna and a duty factor not exceeding 50%. The antenna must be installed to provide a separation distance of at least 108.4 cm from all persons during use with a duty factor not exceeding 50%. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
BE: The output power is continuously variable from the value listed in this entry to 15%-20% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

Mail To:
Izumi Mitsui, Sales & Marketing
Intertek Japan K.K.
2-3-18 Namamugi, Tsurumi-ku
Yokohama, 230-0052
Japan


EA849471
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MET Laboratories, Inc.
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 08/24/2007

Application Dated: 08/24/2007
JVC KENWOOD Corporation
Communication Equipment Division
1-16-2, Hakusan, Midori-ku
Yokohama-shi, Kanagawa-ken,
Japan
 
Attention: Tamaki Shimamura , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  K44378600
Name of Grantee:  JVC KENWOOD Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: VHF Digital Transceiver
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC EF 22, 74, 90 150.0  -  174.0 30.0 2.0  PM 16K0F3E
BC EF 22, 74, 90 150.0  -  174.0 30.0 2.0  PM 14K4F1D
BC EF 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 11K0F3E
BC EF 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 8K30F1E
BC EF 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 8K30F1D
BC EF 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 8K30F7W
BC EF 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 8K10F1E
BC EF 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 8K10F1D
BC EF 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 4K00F1E
BC EF 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 4K00F1D
BC EF 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 4K00F7W
BC EF 22, 74, 90.210 150.0  -  174.0 30.0 2.0  PM 4K00F2D
BE EF 22, 74, 90 150.0  -  174.0 5.0 2.0  PM 16K0F3E
BE EF 22, 74, 90 150.0  -  174.0 5.0 2.0  PM 14K4F1D
BE EF 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 11K0F3E
BE EF 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 8K30F1E
BE EF 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 8K30F1D
BE EF 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 8K30F7W
BE EF 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 8K10F1E
BE EF 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 8K10F1D
BE EF 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 4K00F1E
BE EF 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 4K00F1D
BE EF 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 4K00F7W
BE EF 22, 74, 90.210 150.0  -  174.0 5.0 2.0  PM 4K00F2D

Power output listed is measured at the antenna terminals. Occupational/Controlled MPE evaluation covers fixed-mounted and mobile operation from 1W up to 30W for use with a 2.1 dBi antenna and a duty factor not exceeding 50%. The antenna must be installed to provide a separation distance of at least 108.4 cm from all persons during use with a duty factor not exceeding 50%. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
BE: The output power is continuously variable from the value listed in this entry to 15%-20% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
>

Grants authorize equipment for operation at approved frequencies and sale within the USA. Click an above grant to view details