FCC ID K4439923220
UHF P25 Transceiver
by JVC KENWOOD Corporation
Grantee Code: K44 Product Code: 39923220
Latest application date: 2007-05-03
FCC ID Device Details
| FCC ID | K4439923220 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | K44 |
| Product Code | 39923220 |
| Applicant Business | JVC KENWOOD Corporation 🇯🇵 |
| Related Domains |  jvckenwood.com |
| Equipment Class | UHF P25 Transceiver |
| Test Firm | Intertek Japan K.K. Kashima Site |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 406.1-470 MHz | Original Equipment | 2007-05-03 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2007-05-03 | PDF 444.2 KB |
| Internal Photo | Internal Photos | 2007-05-03 | PDF 225.2 KB |
| External Photo | External Photos | 2007-05-03 | PDF 231 KB |
| Label | ID Label/Location Info | 2007-05-03 | PDF 761.2 KB |
| Setup Photo | Test Setup Photos | 2007-05-03 | PDF 277.3 KB |
| Test Report | Test Report | 2007-05-03 | PDF 299.2 KB |
| Test Report Revision | Test Report | 2007-05-03 | PDF 299.8 KB |
| Confidentiality | Cover Letter(s) | 2007-05-03 | PDF 41 KB |
| Letter of Attorney | Cover Letter(s) | 2007-05-03 | PDF 42.2 KB |
| MPE Calculation | RF Exposure Info | 2007-05-03 | PDF 24.2 KB |
| RF Info | RF Exposure Info | 2007-05-03 | PDF 24.6 KB |
Application Information
| Application ID | Ykg4T634Djyi086tv2hm2g== |
|---|---|
| Final Action Date | 2007-05-03 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0008154510 |
| Model | 39923220 |
| Frequency Range | 406.1-470 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | UHF P25 Transceiver |
| Responsible Party | Tamaki Shimamura, Manager, shimamura.tamaki@jvckenwood.com , 045-939-6254 |
| Test Firm | Takeshi Yamanaka, Intertek Japan K.K. Kashima Site, Takeshi.Yamanaka@intertek.com  , 81-479-40-1097 |
| TCB Email | tcbinfo@metlabs.com  |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output listed is measured at the antenna terminals. Occupational/Controlled MPE evaluation covers fixed-mounted and mobile operation up to 100 W conducted power for use with a 1.64 numeric gain antenna and a duty factor not exceeding 50%. The antenna must be installed to provide a separation distance of at least 170.1 cm from all persons during use with a duty factor not exceeding 50%. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Ykg4T634Djyi086tv2hm2g== | 2007-05-03 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 406.1-470 MHz | 100 | 2ppm | 16K0F3E | 22, 74, 9 | BC |
| 406.1-470 MHz | 100 | 2ppm | 11K0F3E | 22, 74, 90.21 | BC |
| 406.1-470 MHz | 100 | 2ppm | 20K0F7D | 22, 74, 9 | BC |
| 406.1-470 MHz | 100 | 2ppm | 11K2F7D | 22, 74, 90.21 | BC |
| 406.1-470 MHz | 100 | 2ppm | 14K4F1D | 22, 74, 9 | BC |
| 406.1-470 MHz | 100 | 2ppm | 7K20F1D | 22, 74, 90.21 | BC |
| 406.1-470 MHz | 100 | 2ppm | 8K10F1D | 22, 74, 90.21 | BC |
| 406.1-470 MHz | 100 | 2ppm | 8K10F1E | 22, 74, 90.21 | BC |
Grants
TCB Grant - Application Ykg4T634Djyi086tv2hm2g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| MET Laboratories, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230-3432 | Date of Grant: 05/03/2007 Application Dated: 05/03/2007 |
| JVC KENWOOD Corporation |
| Communication Equipment Division |
| 1-16-2, Hakusan, Midori-ku |
| Yokohama-shi, Kanagawa-ken, Japan |
| Attention: Tamaki Shimamura , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K4439923220 |
| Name of Grantee: | JVC KENWOOD Corporation |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | UHF P25 Transceiver |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 22, 74, 90 | 406.1 - 470.0 | 100.0 | 2.0 PM | 16K0F3E |
| BC | 22, 74, 90.210 | 406.1 - 470.0 | 100.0 | 2.0 PM | 11K0F3E |
| BC | 22, 74, 90 | 406.1 - 470.0 | 100.0 | 2.0 PM | 20K0F7D |
| BC | 22, 74, 90.210 | 406.1 - 470.0 | 100.0 | 2.0 PM | 11K2F7D |
| BC | 22, 74, 90 | 406.1 - 470.0 | 100.0 | 2.0 PM | 14K4F1D |
| BC | 22, 74, 90.210 | 406.1 - 470.0 | 100.0 | 2.0 PM | 7K20F1D |
| BC | 22, 74, 90.210 | 406.1 - 470.0 | 100.0 | 2.0 PM | 8K10F1D |
| BC | 22, 74, 90.210 | 406.1 - 470.0 | 100.0 | 2.0 PM | 8K10F1E |
| Power output listed is measured at the antenna terminals. Occupational/Controlled MPE evaluation covers fixed-mounted and mobile operation up to 100 W conducted power for use with a 1.64 numeric gain antenna and a duty factor not exceeding 50%. The antenna must be installed to provide a separation distance of at least 170.1 cm from all persons during use with a duty factor not exceeding 50%. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
EAS Grant - Application Ykg4T634Djyi086tv2hm2g==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| JVC KENWOOD Corporation Communication Equipment Division 1-16-2, Hakusan, Midori-ku Yokohama-shi, Kanagawa-ken, Japan | Date of Grant: 05/03/2007 Application Dated: 05/03/2007 |
| Attention: Tamaki Shimamura , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K4439923220 |
| Name of Grantee: | JVC KENWOOD Corporation |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | UHF P25 Transceiver |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 22, 74, 90 | 406.1 - 470.0 | 100.0 | 2.0 PM | 16K0F3E |
| BC | 22, 74, 90.210 | 406.1 - 470.0 | 100.0 | 2.0 PM | 11K0F3E |
| BC | 22, 74, 90 | 406.1 - 470.0 | 100.0 | 2.0 PM | 20K0F7D |
| BC | 22, 74, 90.210 | 406.1 - 470.0 | 100.0 | 2.0 PM | 11K2F7D |
| BC | 22, 74, 90 | 406.1 - 470.0 | 100.0 | 2.0 PM | 14K4F1D |
| BC | 22, 74, 90.210 | 406.1 - 470.0 | 100.0 | 2.0 PM | 7K20F1D |
| BC | 22, 74, 90.210 | 406.1 - 470.0 | 100.0 | 2.0 PM | 8K10F1D |
| BC | 22, 74, 90.210 | 406.1 - 470.0 | 100.0 | 2.0 PM | 8K10F1E |
| Power output listed is measured at the antenna terminals. Occupational/Controlled MPE evaluation covers fixed-mounted and mobile operation up to 100 W conducted power for use with a 1.64 numeric gain antenna and a duty factor not exceeding 50%. The antenna must be installed to provide a separation distance of at least 170.1 cm from all persons during use with a duty factor not exceeding 50%. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
|
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
| Mail To: |
| EA556087 |