FCC ID K44431200

K44-431200, K44 431200, K44431200, K444312OO, K4443I200

JVC KENWOOD Corporation UHF Digital Transceiver 431200


An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: K44431200 is K44. The remaining characters of the FCC ID, 431200, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: UHF Digital Transceiver

App # Purpose Date Unique ID
1 Original Equipment 2012-09-11 y0Ylf8iioVc/hnyAMO8POw==
2 Class II Permissive Change 2018-02-12 cNKNLzbOKFRC3+aFXrzqWw==

Operating Frequencies

Frequency RangePower OutputToleranceEmission DesignatorRule PartsGrant Notes App #
450-512 MHz45 Watts1ppm4K00F1D9BD, EF 1.1
450-512 MHz45 Watts1ppm4K00F1E9BD, EF 1.2
450-512 MHz45 Watts1ppm4K00F2D9BD, EF 1.3
450-512 MHz45 Watts1ppm4K00F7W9BD, EF 1.4
450-512 MHz45 Watts1ppm8K30F1D9BD, EF 1.5
450-512 MHz45 Watts1ppm8K30F1E9BD, EF 1.6
450-512 MHz45 Watts1ppm8K30F7W9BD, EF 1.7
450-512 MHz45 Watts1ppm11K0F3E9BD, EF 1.8
450-512 MHz45 Watts1ppm11K0F3E22, 74, 9BD, EF 2.2
450-512 MHz45 Watts1ppm8K30F1E22, 74, 9BD, EF, ES 2.3
450-512 MHz45 Watts1ppm8K30F1D22, 74, 9BD, EF, ES 2.4
450-512 MHz45 Watts1ppm8K30F7W22, 74, 9BD, EF, ES 2.5
450-512 MHz45 Watts1ppm4K00F1E22, 74, 9BD, EF, ES 2.6
450-512 MHz45 Watts1ppm4K00F1D22, 74, 9BD, EF, ES 2.7
450-512 MHz45 Watts1ppm4K00F7W22, 74, 9BD, EF, ES 2.8
450-512 MHz45 Watts1ppm4K00F2D22, 74, 9BD, EF, ES 2.9
470-512 MHz45 Watts1ppm16K0F3E9BD 1.9
470-512 MHz45 Watts1ppm16K0F3E22, 74, 9BD 2.1

Exhibits

Available Exhibits

App # Document Type Submitted
Available
2 NX-820H-K_HG-K_FCC_PC_II_LetterCover Letter(s)
Adobe Acrobat PDF (83 kB)		 2018-02-12
2018-02-12
2 NX-820H-K_HG-K_FCC_Justify_LetterCover Letter(s)
Adobe Acrobat PDF (35 kB)		 2018-02-12
2018-02-12
2 NX-820H-K_HG-K_FCC_Attestation LetterAttestation Statements
Adobe Acrobat PDF (37 kB)		 2018-02-12
2018-02-12
2 FCC_BehalfCover Letter(s)
Adobe Acrobat PDF (38 kB)		 2018-02-12
2018-02-12
2 Cross Reference Table for K44431200Test Report
Adobe Acrobat PDF (158 kB)		 2018-02-12
2018-02-12
1 RF Safety InformationOperational Description
Adobe Acrobat PDF (43 kB)		 2012-09-11
2012-09-11
1 Instruction ManualUsers Manual
Adobe Acrobat PDF (300 kB)		 2012-09-11
2012-09-11
1 FCC Part 1.1310 Test ReportRF Exposure Info
Adobe Acrobat PDF (189 kB)		 2012-09-11
2012-09-11
1 FCC Part 90 Test ReportTest Report
Adobe Acrobat PDF (255 kB)		 2012-09-11
2012-09-11
1 Test Setup PhotosTest Setup Photos
Adobe Acrobat PDF (1282 kB)		 2012-09-11
2012-09-11
1 Label and Location PhotosID Label/Location Info
Adobe Acrobat PDF (610 kB)		 2012-09-11
2012-09-11
1 Internal PhotosInternal Photos
Adobe Acrobat PDF (1246 kB)		 2012-09-11
2012-09-11
1 External PhotosExternal Photos
Adobe Acrobat PDF (473 kB)		 2012-09-11
2012-09-11
1 Justification LetterCover Letter(s)
Adobe Acrobat PDF (46 kB)		 2012-09-11
2012-09-11
1 FCC Confidentiality LetterCover Letter(s)
Adobe Acrobat PDF (42 kB)		 2012-09-11
2012-09-11
1 FCC Agent Authorization LetterCover Letter(s)
Adobe Acrobat PDF (40 kB)		 2012-09-11
2012-09-11

APP # 2 (2018-02-12)

App # Document Type Submitted
Available
2 NX-820H-K_HG-K_FCC_PC_II_Letter Cover Letter(s)
Adobe Acrobat PDF (83 kB)		 2018-02-12 00:00:00
2018-02-12 00:00:00
2 NX-820H-K_HG-K_FCC_Justify_Letter Cover Letter(s)
Adobe Acrobat PDF (35 kB)		 2018-02-12 00:00:00
2018-02-12 00:00:00
2 NX-820H-K_HG-K_FCC_Attestation Letter Attestation Statements
Adobe Acrobat PDF (37 kB)		 2018-02-12 00:00:00
2018-02-12 00:00:00
2 FCC_Behalf Cover Letter(s)
Adobe Acrobat PDF (38 kB)		 2018-02-12 00:00:00
2018-02-12 00:00:00
2 Cross Reference Table for K44431200 Test Report
Adobe Acrobat PDF (158 kB)		 2018-02-12 00:00:00
2018-02-12 00:00:00

APP # 1 (2012-09-11)

App # Document Type Submitted
Available
1 RF Safety Information Operational Description
Adobe Acrobat PDF (43 kB)		 2012-09-11 00:00:00
2012-09-11 00:00:00
1 Instruction Manual Users Manual
Adobe Acrobat PDF (300 kB)		 2012-09-11 00:00:00
2012-09-11 00:00:00
1 FCC Part 1.1310 Test Report RF Exposure Info
Adobe Acrobat PDF (189 kB)		 2012-09-11 00:00:00
2012-09-11 00:00:00
1 FCC Part 90 Test Report Test Report
Adobe Acrobat PDF (255 kB)		 2012-09-11 00:00:00
2012-09-11 00:00:00
1 Test Setup Photos Test Setup Photos
Adobe Acrobat PDF (1282 kB)		 2012-09-11 00:00:00
2012-09-11 00:00:00
1 Label and Location Photos ID Label/Location Info
Adobe Acrobat PDF (610 kB)		 2012-09-11 00:00:00
2012-09-11 00:00:00
1 Internal Photos Internal Photos
Adobe Acrobat PDF (1246 kB)		 2012-09-11 00:00:00
2012-09-11 00:00:00
1 External Photos External Photos
Adobe Acrobat PDF (473 kB)		 2012-09-11 00:00:00
2012-09-11 00:00:00
1 Justification Letter Cover Letter(s)
Adobe Acrobat PDF (46 kB)		 2012-09-11 00:00:00
2012-09-11 00:00:00
1 FCC Confidentiality Letter Cover Letter(s)
Adobe Acrobat PDF (42 kB)		 2012-09-11 00:00:00
2012-09-11 00:00:00
1 FCC Agent Authorization Letter Cover Letter(s)
Adobe Acrobat PDF (40 kB)		 2012-09-11 00:00:00
2012-09-11 00:00:00
1 Circuit Description Operational Description
Adobe Acrobat PDF (106 kB)		 2012-09-11 00:00:00
N/A
1 Parts List Parts List/Tune Up Info
Adobe Acrobat PDF (18 kB)		 2012-09-11 00:00:00
N/A
1 Block Diagram Block Diagram
Adobe Acrobat PDF (42 kB)		 2012-09-11 00:00:00
N/A
1 Schematics Schematics
Adobe Acrobat PDF (249 kB)		 2012-09-11 00:00:00
N/A
1 Tune Up Procedure Parts List/Tune Up Info
Adobe Acrobat PDF (152 kB)		 2012-09-11 00:00:00
N/A
1 Active Device Parts List/Tune Up Info
Adobe Acrobat PDF (155 kB)		 2012-09-11 00:00:00
N/A

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: JVC KENWOOD Corporation
FCC Registration Number (FRN): 0008154510
Alphanumeric FCC ID: K44431200
Unique Application Identifier: y0Ylf8iioVc/hnyAMO8POw==
Line one: Communication Equipment Division
Line two: 1-16-2, Hakusan, Midori-ku
City: Yokohama-shi, Kanagawa-ken
State: N/A
Country: Japan

TCB Information
TCB Application Email Address: karens@compliancetesting.com
TCB Scope: B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97

FCC ID
Grantee Code: K44
Product Code: 431200

Person at the applicant's address to receive grant or for contact
Name: Tamaki Shimamura
Title: Manager
Telephone Number: 045-939-6254 Extension:
Fax Number: 045-939-6261
Email: shimamura.tamaki@jvckenwood.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   TNB - Licensed Non-Broadcast Station Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): UHF Digital Transceiver

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power output listed is conducted at the antenna connector. This device must transmit with a source-based time-averaging duty factor not exceeding 50%. The antenna used for this transmitter must be installed to provide a minimum of 40cm separation to persons and must not transmit simultaneously with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The antenna used for this transmitter must not be greater than 0dBd. This devices complies with the narrowbanding requirements of Section 90.203(j)(4).
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Mike Wyman
Title of authorized signature:  Certifying Authority

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: JVC KENWOOD Corporation
FCC Registration Number (FRN): 0008154510
Alphanumeric FCC ID: K44431200
Unique Application Identifier: cNKNLzbOKFRC3+aFXrzqWw==
Line one: Communications Systems Division
Line two: 1-16-2, Hakusan, Midori-ku
City: Yokohama-shi, Kanagawa-ken
State: N/A
Country: Japan

TCB Information
TCB Application Email Address: kent@hctamerica.com;charvey@ieee.org
TCB Scope: B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97

FCC ID
Grantee Code: K44
Product Code: 431200

Person at the applicant's address to receive grant or for contact
Name: Tamaki Shimamura
Title: Manager
Telephone Number: 045-939-6254 Extension:
Fax Number: 045-939-6261
Email: shimamura.tamaki@jvckenwood.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   TNB - Licensed Non-Broadcast Station Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): UHF Digital Transceiver

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Intertek Japan K.K.(Kashima Laboratory)
First Name:   Junichi
Last Name:   Okada
Telephone Number: 81-299-82-8464 Extension:
Fax Number:  81-299-82-8466
E-mail:  junichi.okada@intertek.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change. Power output listed is conducted at the antenna connector. This device must transmit with a source-based time-averaging duty factor not exceeding 50%. The antenna used for this transmitter must be installed to provide a minimum of 40cm separation to persons and must not transmit simultaneously with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The antenna used for this transmitter must not be greater than 0dBd. This devices complies with the narrowbanding requirements of Section 90.203(j)(4).
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  SunHee Kim
Title of authorized signature:  Agent

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

Grants

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  HCT America LLC
1726 Ringwood Avenue
San Jose, CA 95131
 Date of Grant: 02/12/2018

Application Dated: 02/12/2018
JVC KENWOOD Corporation
Communications Systems Division
1-16-2, Hakusan, Midori-ku
Yokohama-shi, Kanagawa-ken,
Japan
 
Attention: Tamaki Shimamura , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  K44431200
Name of Grantee:  JVC KENWOOD Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: UHF Digital Transceiver
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BD 22, 74, 90 470.0  -  512.0 45.0 1.0  PM 16K0F3E
BD EF 22, 74, 90 450.0  -  512.0 45.0 1.0  PM 11K0F3E
BD EF ES 22, 74, 90 450.0  -  512.0 45.0 1.0  PM 8K30F1E
BD EF ES 22, 74, 90 450.0  -  512.0 45.0 1.0  PM 8K30F1D
BD EF ES 22, 74, 90 450.0  -  512.0 45.0 1.0  PM 8K30F7W
BD EF ES 22, 74, 90 450.0  -  512.0 45.0 1.0  PM 4K00F1E
BD EF ES 22, 74, 90 450.0  -  512.0 45.0 1.0  PM 4K00F1D
BD EF ES 22, 74, 90 450.0  -  512.0 45.0 1.0  PM 4K00F7W
BD EF ES 22, 74, 90 450.0  -  512.0 45.0 1.0  PM 4K00F2D

Class II Permissive Change. Power output listed is conducted at the antenna connector. This device must transmit with a source-based time-averaging duty factor not exceeding 50%. The antenna used for this transmitter must be installed to provide a minimum of 40cm separation to persons and must not transmit simultaneously with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The antenna used for this transmitter must not be greater than 0dBd. This devices complies with the narrowbanding requirements of Section 90.203(j)(4).

BD: The output power is continuously variable from the value listed in this entry to 10%-15% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES: This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

JVC KENWOOD Corporation
Communications Systems Division 1-16-2, Hakusan, Midori-ku
Yokohama-shi, Kanagawa-ken,
Japan 		  Date of Grant: 02/12/2018

Application Dated: 02/12/2018
 
Attention: Tamaki Shimamura , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  K44431200
Name of Grantee:  JVC KENWOOD Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: UHF Digital Transceiver
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BD 22, 74, 90 470.0  -  512.0 45.0 1.0  PM 16K0F3E
BD EF 22, 74, 90 450.0  -  512.0 45.0 1.0  PM 11K0F3E
BD EF ES 22, 74, 90 450.0  -  512.0 45.0 1.0  PM 8K30F1E
BD EF ES 22, 74, 90 450.0  -  512.0 45.0 1.0  PM 8K30F1D
BD EF ES 22, 74, 90 450.0  -  512.0 45.0 1.0  PM 8K30F7W
BD EF ES 22, 74, 90 450.0  -  512.0 45.0 1.0  PM 4K00F1E
BD EF ES 22, 74, 90 450.0  -  512.0 45.0 1.0  PM 4K00F1D
BD EF ES 22, 74, 90 450.0  -  512.0 45.0 1.0  PM 4K00F7W
BD EF ES 22, 74, 90 450.0  -  512.0 45.0 1.0  PM 4K00F2D

Class II Permissive Change. Power output listed is conducted at the antenna connector. This device must transmit with a source-based time-averaging duty factor not exceeding 50%. The antenna used for this transmitter must be installed to provide a minimum of 40cm separation to persons and must not transmit simultaneously with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The antenna used for this transmitter must not be greater than 0dBd. This devices complies with the narrowbanding requirements of Section 90.203(j)(4).


BD: The output power is continuously variable from the value listed in this entry to 10%-15% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES: This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

Mail To:


EA210005
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Compliance Testing, LLC
1724 S. Nevada Way
Mesa, AZ 85204
 Date of Grant: 09/11/2012

Application Dated: 09/11/2012
JVC KENWOOD Corporation
Communication Equipment Division
1-16-2, Hakusan, Midori-ku
Yokohama-shi, Kanagawa-ken,
Japan
 
Attention: Tamaki Shimamura , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  K44431200
Name of Grantee:  JVC KENWOOD Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: UHF Digital Transceiver
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BD EF 90 450.0  -  512.0 45.0 1.0  PM 4K00F1D
BD EF 90 450.0  -  512.0 45.0 1.0  PM 4K00F1E
BD EF 90 450.0  -  512.0 45.0 1.0  PM 4K00F2D
BD EF 90 450.0  -  512.0 45.0 1.0  PM 4K00F7W
BD EF 90 450.0  -  512.0 45.0 1.0  PM 8K30F1D
BD EF 90 450.0  -  512.0 45.0 1.0  PM 8K30F1E
BD EF 90 450.0  -  512.0 45.0 1.0  PM 8K30F7W
BD EF 90 450.0  -  512.0 45.0 1.0  PM 11K0F3E
BD 90 470.0  -  512.0 45.0 1.0  PM 16K0F3E

Power output listed is conducted at the antenna connector. This device must transmit with a source-based time-averaging duty factor not exceeding 50%. The antenna used for this transmitter must be installed to provide a minimum of 40cm separation to persons and must not transmit simultaneously with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The antenna used for this transmitter must not be greater than 0dBd. This devices complies with the narrowbanding requirements of Section 90.203(j)(4).

BD: The output power is continuously variable from the value listed in this entry to 10%-15% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

JVC KENWOOD Corporation
Communication Equipment Division 1-16-2, Hakusan, Midori-ku
Yokohama-shi, Kanagawa-ken,
Japan 		  Date of Grant: 09/11/2012

Application Dated: 09/11/2012
 
Attention: Tamaki Shimamura , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  K44431200
Name of Grantee:  JVC KENWOOD Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: UHF Digital Transceiver
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BD EF 90 450.0  -  512.0 45.0 1.0  PM 4K00F1D
BD EF 90 450.0  -  512.0 45.0 1.0  PM 4K00F1E
BD EF 90 450.0  -  512.0 45.0 1.0  PM 4K00F2D
BD EF 90 450.0  -  512.0 45.0 1.0  PM 4K00F7W
BD EF 90 450.0  -  512.0 45.0 1.0  PM 8K30F1D
BD EF 90 450.0  -  512.0 45.0 1.0  PM 8K30F1E
BD EF 90 450.0  -  512.0 45.0 1.0  PM 8K30F7W
BD EF 90 450.0  -  512.0 45.0 1.0  PM 11K0F3E
BD 90 470.0  -  512.0 45.0 1.0  PM 16K0F3E

Power output listed is conducted at the antenna connector. This device must transmit with a source-based time-averaging duty factor not exceeding 50%. The antenna used for this transmitter must be installed to provide a minimum of 40cm separation to persons and must not transmit simultaneously with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The antenna used for this transmitter must not be greater than 0dBd. This devices complies with the narrowbanding requirements of Section 90.203(j)(4).


BD: The output power is continuously variable from the value listed in this entry to 10%-15% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

Mail To:


EA522159

Grants authorize equipment for operation at approved frequencies and sale within the USA. Click an above grant to view details

Facebook Twitter Google+ RSS © FCCID.io 2018