FCC ID K44500000

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

HCT America LLC 1726 Ringwood Avenue San Jose, CA 95131

Date of Grant: 05/17/2018 Application Dated: 05/17/2018

JVC KENWOOD Corporation

Communications Systems Division

1-16-2, Hakusan, Midori-ku

Yokohama-shi, Kanagawa-ken, Japan

Attention: Tamaki Shimamura , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	K44500000
Name of Grantee:	JVC KENWOOD Corporation
Equipment Class:	Licensed Non-Broadcast Transmitter Held to Face
Notes:	UHF DIGITAL TRANSCEIVER

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
EF	90	450.0  -  470.0	2.0	2.5  PM	16K0F3E
EF	90	450.0  -  470.0	2.0	2.5  PM	11K0F3E
EF ES	90	450.0  -  470.0	2.0	2.5  PM	8K30F1E
EF ES	90	450.0  -  470.0	2.0	2.5  PM	8K30F1D
EF ES	90	450.0  -  470.0	2.0	2.5  PM	8K30F7W
EF ES	90	450.0  -  470.0	2.0	2.5  PM	4K00F1E
EF ES	90	450.0  -  470.0	2.0	2.5  PM	4K00F1D
EF ES	90	450.0  -  470.0	2.0	2.5  PM	4K00F7W
EF ES	90	450.0  -  470.0	2.0	2.5  PM	4K00F2D

Power output listed is at the antenna terminal on the device. This transmitter has been tested for SAR compliance in Push-to-Talk and Body-Worn operating configurations with specific antennas, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. Device must operate at a duty factor not exceeding 50% and SAR compliance for body-worn operating configurations is limited to those described in this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported head and body-worn accessory SAR values at 50% duty factor are 0.92 W/kg and 1.32 W/kg, respectively.

EF:	This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES:	This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

JVC KENWOOD Corporation Communications Systems Division 1-16-2, Hakusan, Midori-ku Yokohama-shi, Kanagawa-ken, Japan

Date of Grant: 05/17/2018 Application Dated: 05/17/2018

Attention: Tamaki Shimamura , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	K44500000
Name of Grantee:	JVC KENWOOD Corporation
Equipment Class:	Licensed Non-Broadcast Transmitter Held to Face
Notes:	UHF DIGITAL TRANSCEIVER
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
EF	90	450.0  -  470.0	2.0	2.5  PM	16K0F3E
EF	90	450.0  -  470.0	2.0	2.5  PM	11K0F3E
EF ES	90	450.0  -  470.0	2.0	2.5  PM	8K30F1E
EF ES	90	450.0  -  470.0	2.0	2.5  PM	8K30F1D
EF ES	90	450.0  -  470.0	2.0	2.5  PM	8K30F7W
EF ES	90	450.0  -  470.0	2.0	2.5  PM	4K00F1E
EF ES	90	450.0  -  470.0	2.0	2.5  PM	4K00F1D
EF ES	90	450.0  -  470.0	2.0	2.5  PM	4K00F7W
EF ES	90	450.0  -  470.0	2.0	2.5  PM	4K00F2D

Power output listed is at the antenna terminal on the device. This transmitter has been tested for SAR compliance in Push-to-Talk and Body-Worn operating configurations with specific antennas, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. Device must operate at a duty factor not exceeding 50% and SAR compliance for body-worn operating configurations is limited to those described in this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported head and body-worn accessory SAR values at 50% duty factor are 0.92 W/kg and 1.32 W/kg, respectively.

EF:	This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES:	This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

TCB Grant - Application 7LErYaFyEEg0AD3yLWQG3g==

EAS Grant - Application 7LErYaFyEEg0AD3yLWQG3g==

TCB Grant - Application /6m/Qbri3wlr4vHGkym1Hg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

HCT America LLC 1726 Ringwood Avenue San Jose, CA 95131

Date of Grant: 05/17/2018 Application Dated: 05/17/2018

JVC KENWOOD Corporation

Communications Systems Division

1-16-2, Hakusan, Midori-ku

Yokohama-shi, Kanagawa-ken, Japan

Attention: Tamaki Shimamura , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	K44500000
Name of Grantee:	JVC KENWOOD Corporation
Equipment Class:	Licensed Non-Broadcast Transmitter Held to Face
Notes:	UHF DIGITAL TRANSCEIVER

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
EF	22, 74, 90	450.0  -  470.0	2.0	2.5  PM	16K0F3E
EF	22, 74, 90	450.0  -  470.0	2.0	2.5  PM	11K0F3E
EF ES	22, 74, 90	450.0  -  470.0	2.0	2.5  PM	8K30F1E
EF ES	22, 74, 90	450.0  -  470.0	2.0	2.5  PM	8K30F1D
EF ES	22, 74, 90	450.0  -  470.0	2.0	2.5  PM	8K30F7W
EF ES	22, 74, 90	450.0  -  470.0	2.0	2.5  PM	4K00F1E
EF ES	22, 74, 90	450.0  -  470.0	2.0	2.5  PM	4K00F1D
EF ES	22, 74, 90	450.0  -  470.0	2.0	2.5  PM	4K00F7W
EF ES	22, 74, 90	450.0  -  470.0	2.0	2.5  PM	4K00F2D

Class II Permissive Change to add Part 22 and 74. Power output listed is at the antenna terminal on the device. This transmitter has been tested for SAR compliance in Push-to-Talk and Body-Worn operating configurations with specific antennas, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. Device must operate at a duty factor not exceeding 50% and SAR compliance for body-worn operating configurations is limited to those described in this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported head and body-worn accessory SAR values at 50% duty factor are 0.92 W/kg and 1.32 W/kg, respectively.

EF:	This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES:	This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

JVC KENWOOD Corporation Communications Systems Division 1-16-2, Hakusan, Midori-ku Yokohama-shi, Kanagawa-ken, Japan

Date of Grant: 05/17/2018 Application Dated: 05/17/2018

Attention: Tamaki Shimamura , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	K44500000
Name of Grantee:	JVC KENWOOD Corporation
Equipment Class:	Licensed Non-Broadcast Transmitter Held to Face
Notes:	UHF DIGITAL TRANSCEIVER
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
EF	22, 74, 90	450.0  -  470.0	2.0	2.5  PM	16K0F3E
EF	22, 74, 90	450.0  -  470.0	2.0	2.5  PM	11K0F3E
EF ES	22, 74, 90	450.0  -  470.0	2.0	2.5  PM	8K30F1E
EF ES	22, 74, 90	450.0  -  470.0	2.0	2.5  PM	8K30F1D
EF ES	22, 74, 90	450.0  -  470.0	2.0	2.5  PM	8K30F7W
EF ES	22, 74, 90	450.0  -  470.0	2.0	2.5  PM	4K00F1E
EF ES	22, 74, 90	450.0  -  470.0	2.0	2.5  PM	4K00F1D
EF ES	22, 74, 90	450.0  -  470.0	2.0	2.5  PM	4K00F7W
EF ES	22, 74, 90	450.0  -  470.0	2.0	2.5  PM	4K00F2D

Class II Permissive Change to add Part 22 and 74. Power output listed is at the antenna terminal on the device. This transmitter has been tested for SAR compliance in Push-to-Talk and Body-Worn operating configurations with specific antennas, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. Device must operate at a duty factor not exceeding 50% and SAR compliance for body-worn operating configurations is limited to those described in this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported head and body-worn accessory SAR values at 50% duty factor are 0.92 W/kg and 1.32 W/kg, respectively.

EF:	This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES:	This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

TCB Grant - Application +d/DU8tB7a/FSNQDAw7bBA==

EAS Grant - Application +d/DU8tB7a/FSNQDAw7bBA==

Mail To: