FCC ID K660A290910
Ultra-Low Power Wi-Fi Module
by Yaesu Musen Co., Ltd.
Grantee Code: K66 Product Code: 0A290910
Latest application date: 2017-08-17
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2017-08-17 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: YOPGS2100MIP Grant Date: 06/25/2014 | 2017-08-14 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Operating Manual Host | Users Manual | 2017-11-15 | PDF 775.4 KB |
| Internal Photos of Host | Internal Photos | 2017-11-15 | PDF 649.1 KB |
| External Photos of Host | External Photos | 2017-11-15 | PDF 2.1 MB |
| External Photos | External Photos | 2017-08-14 | PDF 1.2 MB |
| Host Device Label Sample | ID Label/Location Info | 2017-08-17 | PDF 395 KB |
| Label Location | ID Label/Location Info | 2017-08-17 | PDF 572.9 KB |
| Drawing WLAN Module Label | ID Label/Location Info | 2017-08-14 | PDF 414.2 KB |
| Test Setup Photos SAR | Test Setup Photos | 2017-11-15 | PDF 240.6 KB |
| Test Setup Photos for Host JBP portion NOT SAR | Test Setup Photos | 2017-11-15 | PDF 1.5 MB |
| Agent Power of Attorney | Cover Letter(s) | 2017-08-17 | PDF 90.7 KB |
| Class II Permissive Change | Cover Letter(s) | 2017-08-17 | PDF 83.7 KB |
| Confidential Request Letter | Cover Letter(s) | 2017-08-17 | PDF 77.7 KB |
| Change in FCC ID Letter | Cover Letter(s) | 2017-08-14 | PDF 83.8 KB |
| FCC Permission Letter | Cover Letter(s) | 2017-08-14 | PDF 185.1 KB |
Application Information
| Application ID | 31lVhvjZleJp/ILKxXkxrw== |
|---|---|
| Final Action Date | 2017-08-17 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013655220 |
| Model | 0A290910 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Ultra-Low Power Wi-Fi Module |
| Responsible Party | Tetsuya Masubuchi, Engineering Division/Quality Assurance Leader, t.masubuchi@yaesu.com  , 81-3-6711-4121 |
| Test Firm | Bruno Clavier, Timco Engineering, Inc., bruno@timcoengr.com  , 352-472-5500 |
| TCB Email | tei@timcoengr.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 11/15/2017 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Single Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: Limited Single Modular Approval. Adding portable use in Yaesu SSM-71H. SAR compliance for body-worn operating configurations is limited to the specific body-worn accessories, such as belt-clips and holsters, tested for this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head (face) and body-worn accessory) exposure conditions are <0.10 W/kg and <0.10 W/kg, respectively. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 31lVhvjZleJp/ILKxXkxrw== | 2017-08-17 | Class II permissive change or modification of presently authorized equipment |
| omRDHpSEBQNT+lyLsuFfrQ== | 2017-08-14 | Change in identification of presently authorized equipment. Original FCC ID: YOPGS2100MIP Grant Date: 06/25/2014 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.0906000 | 15C |
Grants
TCB Grant - Application omRDHpSEBQNT+lyLsuFfrQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 08/14/2017 Application Dated: 08/14/2017 |
| Yaesu Musen Co., Ltd. |
| Tennozu Parkside Building |
| 2-5-8 Higashi-Shinagawa, Shinagawa-ku |
| Tokyo, 140-0002 Japan |
| Attention: Tetsuya Masubuchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K660A290910 |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Ultra-Low Power Wi-Fi Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0906 |
| Modular Approval. Power output listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application omRDHpSEBQNT+lyLsuFfrQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Yaesu Musen Co., Ltd. Tennozu Parkside Building 2-5-8 Higashi-Shinagawa, Shinagawa-ku Tokyo, 140-0002 Japan |
Date of Grant: 08/14/2017 Application Dated: 08/14/2017 |
| Attention: Tetsuya Masubuchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K660A290910 |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Ultra-Low Power Wi-Fi Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0906 |
| Modular Approval. Power output listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 08/17/2017 Application Dated: 08/17/2017 |
| Yaesu Musen Co., Ltd. |
| Tennozu Parkside Building |
| 2-5-8 Higashi-Shinagawa, Shinagawa-ku |
| Tokyo, 140-0002 Japan |
| Attention: Tetsuya Masubuchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K660A290910 |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Ultra-Low Power Wi-Fi Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0906 |
| Limited Single Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: Limited Single Modular Approval. Adding portable use in Yaesu SSM-71H. SAR compliance for body-worn operating configurations is limited to the specific body-worn accessories, such as belt-clips and holsters, tested for this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head (face) and body-worn accessory) exposure conditions are <0.10 W/kg and <0.10 W/kg, respectively. |
EAS Grant - Application 31lVhvjZleJp/ILKxXkxrw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Yaesu Musen Co., Ltd. Tennozu Parkside Building 2-5-8 Higashi-Shinagawa, Shinagawa-ku Tokyo, 140-0002 Japan |
Date of Grant: 08/17/2017 Application Dated: 08/17/2017 |
| Attention: Tetsuya Masubuchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K660A290910 |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Ultra-Low Power Wi-Fi Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0906 |
| Limited Single Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: Limited Single Modular Approval. Adding portable use in Yaesu SSM-71H. SAR compliance for body-worn operating configurations is limited to the specific body-worn accessories, such as belt-clips and holsters, tested for this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head (face) and body-worn accessory) exposure conditions are <0.10 W/kg and <0.10 W/kg, respectively. |
| Mail To: |