FCC ID K660A300910
ULTRA LOW POWER WIFI MODULE
by Yaesu Musen Co., Ltd.
Grantee Code: K66 Product Code: 0A300910
Latest application date: 2017-11-20
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2017-11-20 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: YOPGS2100MIE Grant Date: 06/22/2014 | 2017-10-19 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Operating Manual | Users Manual | 2017-11-20 | PDF 354.6 KB |
| Internal Photos | Internal Photos | 2017-11-20 | PDF 431.2 KB |
| External Photos | External Photos | 2017-11-20 | PDF 678.7 KB |
| External Photos | External Photos | 2017-10-19 | PDF 168.9 KB |
| Module External Photos | External Photos | 2017-10-19 | PDF 192.7 KB |
| ID Drawing | ID Label/Location Info | 2017-11-20 | PDF 396.4 KB |
| Module Label Sample and Location | ID Label/Location Info | 2017-10-19 | PDF 111.7 KB |
| Operational Description | Operational Description | 2017-11-20 | PDF 63.5 KB |
| Test Setup Photos | Test Setup Photos | 2017-11-20 | PDF 374.3 KB |
| Test Report | Test Report | 2017-11-20 | PDF 163.1 KB |
| Class II Permissive Change | Cover Letter(s) | 2017-11-20 | PDF 108.1 KB |
| Power of Attorney | Cover Letter(s) | 2017-11-20 | PDF 96.6 KB |
| Agent Power of Attorney Letter | Cover Letter(s) | 2017-10-19 | PDF 96.6 KB |
| Change in FCC ID Request Letter | Cover Letter(s) | 2017-10-19 | PDF 76.5 KB |
| FCC Permission Letter | Cover Letter(s) | 2017-10-19 | PDF 187.6 KB |
Application Information
| Application ID | p79VLqvQiLZW8d21NcnnWQ== |
|---|---|
| Final Action Date | 2017-11-20 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013655220 |
| Model | 0A300910 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | ULTRA LOW POWER WIFI MODULE |
| Responsible Party | Tetsuya Masubuchi, Engineering Division/Quality Assurance Leader, t.masubuchi@yaesu.com  , 81-3-6711-4121 |
| Test Firm | Bruno Clavier, Timco Engineering, Inc., bruno@timcoengr.com  , 352-472-5500 |
| TCB Email | TEI@TIMCOENGR.COM |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval. Power output listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and endusers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| p79VLqvQiLZW8d21NcnnWQ== | 2017-11-20 | Class II permissive change or modification of presently authorized equipment |
| n206ozzwRDWRVITdKN4shg== | 2017-10-19 | Change in identification of presently authorized equipment. Original FCC ID: YOPGS2100MIE Grant Date: 06/22/2014 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.0950000 | 15C |
Grants
TCB Grant - Application p79VLqvQiLZW8d21NcnnWQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 11/20/2017 Application Dated: 11/20/2017 |
| Yaesu Musen Co., Ltd. |
| Tennozu Parkside Building |
| 2-5-8 Higashi-Shinagawa, Shinagawa-ku |
| Tokyo, 140-0002 Japan |
| Attention: Tetsuya Masubuchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K660A300910 |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | ULTRA LOW POWER WIFI MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.095 |
| Modular Approval. Power output listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and endusers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application p79VLqvQiLZW8d21NcnnWQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Yaesu Musen Co., Ltd. Tennozu Parkside Building 2-5-8 Higashi-Shinagawa, Shinagawa-ku Tokyo, 140-0002 Japan |
Date of Grant: 11/20/2017 Application Dated: 11/20/2017 |
| Attention: Tetsuya Masubuchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K660A300910 |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | ULTRA LOW POWER WIFI MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.095 |
| Modular Approval. Power output listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and endusers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 10/19/2017 Application Dated: 10/19/2017 |
| Yaesu Musen Co., Ltd. |
| Tennozu Parkside Building |
| 2-5-8 Higashi-Shinagawa, Shinagawa-ku |
| Tokyo, 140-0002 Japan |
| Attention: Tetsuya Masubuchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K660A300910 |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | ULTRA LOW POWER WIFI MODULE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.095 |
| Modular Approval. Power output listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and endusers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application n206ozzwRDWRVITdKN4shg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Yaesu Musen Co., Ltd. Tennozu Parkside Building 2-5-8 Higashi-Shinagawa, Shinagawa-ku Tokyo, 140-0002 Japan |
Date of Grant: 10/19/2017 Application Dated: 10/19/2017 |
| Attention: Tetsuya Masubuchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K660A300910 |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | ULTRA LOW POWER WIFI MODULE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.095 |
| Modular Approval. Power output listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and endusers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |