FCC ID K6610333020
FM PORTABLE VHF HANDHELD TRANSCEIVER
by Yaesu Musen Co., Ltd.
Grantee Code: K66 Product Code: 10333020
Latest application date: 2009-11-09
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 134-174 MHz | Class II permissive change or modification of presently authorized equipment | 2009-11-09 |
| 134-174 MHz | Original Equipment | 2004-12-23 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| USERS MANUAL | Users Manual | 2004-12-23 | PDF 147.5 KB |
| INTERNAL PHOTOS | Internal Photos | 2004-12-23 | PDF 1.7 MB |
| EXTERNAL PHOTOS | External Photos | 2004-12-23 | PDF 580.5 KB |
| ID LABEL SAMPLE AND LOCATION | ID Label/Location Info | 2004-12-23 | PDF 572.3 KB |
| SCHEMTICS | Schematics | 2004-12-23 | PDF 1.9 MB |
| OPERATIONAL DESCRIPTION | Operational Description | 2004-12-23 | PDF 70.1 KB |
| Test Report | Test Report | 2009-11-09 | PDF 210.7 KB |
| TEST REPORT | Test Report | 2004-12-23 | PDF 394.7 KB |
| Cover Letter | Cover Letter(s) | 2009-11-09 | PDF 64.5 KB |
| PARTS LIST | Parts List/Tune Up Info | 2004-12-23 | PDF 41.3 KB |
Application Information
| Application ID | 3Rja74hp2O3xTR9AZB7Hpw== |
|---|---|
| Final Action Date | 2009-11-09 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013655220 |
| Model | 10333020 |
| Frequency Range | 134-174 MHz |
| Equipment Class | TNF - Licensed Non-Broadcast Transmitter Held to Face |
| Device Description | FM PORTABLE VHF HANDHELD TRANSCEIVER |
| Responsible Party | Kouji Taguchi, Engineering Division/Quality Assurance Leader, k.taguchi@yaesu.com  , 81-3-6711-4121 |
| Test Firm | Sid Sanders, Timco Engineering, Inc., tei@timcoengr.com  , 352-472-5500 |
| TCB Email | TEI@TIMCOENGR.COM |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure environment not exceeding a maximum transmitting duty cycle factor of 50%. Hand held and body-worn RF exposure compliance is limited to the specific antenna, belt-clip and speaker/microphone configurations tested for in this filing. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This transmitter may operate with the antenna tested for in this filing in Push-to-Talk and body-worn configurations. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled limit and requirements. (Orig. Grant: 12/23/2004) Class II Permissive Change: This Class II Change adds output power continuously variable between 0.25 Watts and the listed power of 5.0 Watts. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 3Rja74hp2O3xTR9AZB7Hpw== | 2009-11-09 | Class II permissive change or modification of presently authorized equipment |
| B6+ThYLnPhPvPOnnTMbU5g== | 2004-12-23 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application B6+ThYLnPhPvPOnnTMbU5g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 12/23/2004 Application Dated: 12/23/2004 |
| Yaesu Musen Co., Ltd. |
| Tennozu Parkside Building |
| 2-5-8 Higashi-Shinagawa, Shinagawa-ku |
| Tokyo, 140-0002 Japan |
| Attention: Tetsuya Masubuchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K6610333020 |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | FM PORTABLE VHF HANDHELD TRANSCEIVER |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22, 90 | 134.0 - 174.0 | 5.0 | 2.5 PM | 16K0F3E | |
| 22, 90 | 134.0 - 174.0 | 5.0 | 2.5 PM | 11K0F3E | |
| 22, 90 | 134.0 - 174.0 | 1.0 | 2.5 PM | 16K0F3E | |
| 22, 90 | 134.0 - 174.0 | 1.0 | 2.5 PM | 11K0F3E |
| Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure environment not exceeding a maximum transmitting duty cycle factor of 50%. Hand held and body-worn RF exposure compliance is limited to the specific antenna, belt-clip and speaker/microphone configurations tested for in this filing. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This transmitter may operate with the antenna tested for in this filing in Push-to-Talk and body-worn configurations. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled limit and requirements.
|
EAS Grant - Application B6+ThYLnPhPvPOnnTMbU5g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Yaesu Musen Co., Ltd. Tennozu Parkside Building 2-5-8 Higashi-Shinagawa, Shinagawa-ku Tokyo, 140-0002 Japan |
Date of Grant: 12/23/2004 Application Dated: 12/23/2004 |
| Attention: Tetsuya Masubuchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K6610333020 |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | FM PORTABLE VHF HANDHELD TRANSCEIVER |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22, 90 | 134.0 - 174.0 | 5.0 | 2.5 PM | 16K0F3E | |
| 22, 90 | 134.0 - 174.0 | 5.0 | 2.5 PM | 11K0F3E | |
| 22, 90 | 134.0 - 174.0 | 1.0 | 2.5 PM | 16K0F3E | |
| 22, 90 | 134.0 - 174.0 | 1.0 | 2.5 PM | 11K0F3E |
| Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure environment not exceeding a maximum transmitting duty cycle factor of 50%. Hand held and body-worn RF exposure compliance is limited to the specific antenna, belt-clip and speaker/microphone configurations tested for in this filing. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This transmitter may operate with the antenna tested for in this filing in Push-to-Talk and body-worn configurations. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled limit and requirements.
|
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 11/09/2009 Application Dated: 11/09/2009 |
| Yaesu Musen Co., Ltd. |
| Tennozu Parkside Building |
| 2-5-8 Higashi-Shinagawa, Shinagawa-ku |
| Tokyo, 140-0002 Japan |
| Attention: Kouji Taguchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K6610333020 |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | FM PORTABLE VHF HANDHELD TRANSCEIVER |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22, 90 | 134.0 - 174.0 | 5.0 | 2.5 PM | 16K0F3E | |
| 22, 90 | 134.0 - 174.0 | 5.0 | 2.5 PM | 11K0F3E | |
| 22, 90 | 134.0 - 174.0 | 1.0 | 2.5 PM | 16K0F3E | |
| 22, 90 | 134.0 - 174.0 | 1.0 | 2.5 PM | 11K0F3E |
| Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure environment not exceeding a maximum transmitting duty cycle factor of 50%. Hand held and body-worn RF exposure compliance is limited to the specific antenna, belt-clip and speaker/microphone configurations tested for in this filing. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This transmitter may operate with the antenna tested for in this filing in Push-to-Talk and body-worn configurations. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled limit and requirements. (Orig. Grant: 12/23/2004) Class II Permissive Change: This Class II Change adds output power continuously variable between 0.25 Watts and the listed power of 5.0 Watts.
|
EAS Grant - Application 3Rja74hp2O3xTR9AZB7Hpw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Yaesu Musen Co., Ltd. Tennozu Parkside Building 2-5-8 Higashi-Shinagawa, Shinagawa-ku Tokyo, 140-0002 Japan |
Date of Grant: 11/09/2009 Application Dated: 11/09/2009 |
| Attention: Kouji Taguchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K6610333020 |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | FM PORTABLE VHF HANDHELD TRANSCEIVER |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22, 90 | 134.0 - 174.0 | 5.0 | 2.5 PM | 16K0F3E | |
| 22, 90 | 134.0 - 174.0 | 5.0 | 2.5 PM | 11K0F3E | |
| 22, 90 | 134.0 - 174.0 | 1.0 | 2.5 PM | 16K0F3E | |
| 22, 90 | 134.0 - 174.0 | 1.0 | 2.5 PM | 11K0F3E |
| Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure environment not exceeding a maximum transmitting duty cycle factor of 50%. Hand held and body-worn RF exposure compliance is limited to the specific antenna, belt-clip and speaker/microphone configurations tested for in this filing. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This transmitter may operate with the antenna tested for in this filing in Push-to-Talk and body-worn configurations. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled limit and requirements. (Orig. Grant: 12/23/2004) Class II Permissive Change: This Class II Change adds output power continuously variable between 0.25 Watts and the listed power of 5.0 Watts.
|
| Mail To: |