FCC ID K6610443250
Rack Mount Repeater
by Yaesu Musen Co., Ltd.
Grantee Code: K66 Product Code: 10443250
Latest application date: 2011-11-15
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 150-174 MHz | Class II permissive change or modification of presently authorized equipment | 2011-11-15 |
| 148-174 MHz | Original Equipment | 2005-06-29 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual 1 | Users Manual | 2011-11-15 | PDF 633.1 KB |
| Users Manual 2 | Users Manual | 2011-11-15 | PDF 264.1 KB |
| Users Manual | Users Manual | 2005-06-29 | PDF 461.5 KB |
| Internal Photos | Internal Photos | 2011-11-15 | PDF 208.6 KB |
| Internal Photos | Internal Photos | 2005-06-29 | PDF 1.1 MB |
| External Photos | External Photos | 2005-06-29 | PDF 410.2 KB |
| FCC ID Label and Location | ID Label/Location Info | 2011-11-15 | PDF 681.6 KB |
| Label Info and Location Metadata only | ID Label/Location Info | 2005-06-29 | PDF 63 KB |
| Label Information and Location | ID Label/Location Info | 2005-06-29 | PDF 61 KB |
| MPE Calculation | Operational Description | 2005-06-29 | PDF 23 KB |
| MPE Information | Operational Description | 2005-06-29 | PDF 117.9 KB |
| Operational Description | Operational Description | 2005-06-29 | PDF 100.6 KB |
| Test Setup Photos | Test Setup Photos | 2011-11-15 | PDF 293.6 KB |
| Test Setup Photos | Test Setup Photos | 2005-06-29 | PDF 211.8 KB |
| Test Report | Test Report | 2011-11-15 | PDF 235.3 KB |
| Test Report | Test Report | 2005-06-29 | PDF 149 KB |
| Attestation Statement | Attestation Statements | 2011-11-15 | PDF 72.3 KB |
| Letter of Attestation | Attestation Statements | 2005-06-29 | PDF 23 KB |
| Class II Cover Letter | Cover Letter(s) | 2011-11-15 | PDF 29.5 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2011-11-15 | PDF 72 KB |
| Letter of Attorney 1 | Cover Letter(s) | 2005-06-29 | PDF 90.4 KB |
| Letter of Attorney 2 | Cover Letter(s) | 2005-06-29 | PDF 62 KB |
| Letter of Confidentiality | Cover Letter(s) | 2005-06-29 | PDF 69.2 KB |
| TCB Service Agreement | Cover Letter(s) | 2005-06-29 | PDF 71.6 KB |
| Parts List | Parts List/Tune Up Info | 2005-06-29 | PDF 51.9 KB |
| Tuning Procedure | Parts List/Tune Up Info | 2005-06-29 | PDF 99.5 KB |
| Block Diagram 1 Metadata only | Block Diagram | PDF 240.2 KB | |
| Block Diagram 2 Metadata only | Block Diagram | PDF 164.8 KB | |
| Schematics 1PA Unit Metadata only | Schematics | PDF 353 KB | |
| Schematics 2 CNTL Unit Metadata only | Schematics | PDF 1.1 MB | |
| Schematics 3 Connection Diagram Metadata only | Schematics | PDF 271.3 KB | |
| Schematics 4 Main Unit Metadata only | Schematics | PDF 1.3 MB | |
| Schematics 5 REG Unit Metadata only | Schematics | PDF 358.6 KB | |
| Schematics 6 Relay Unit Metadata only | Schematics | PDF 41.1 KB |
Application Information
| Application ID | tE4aQ21vO4DvG3WwBSf4+Q== |
|---|---|
| Final Action Date | 2011-11-15 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013655220 |
| Model | 10443250 |
| Frequency Range | 150-174 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | Rack Mount Repeater |
| Responsible Party | Kouji Taguchi, Engineering Division/Quality Assurance Leader, k.taguchi@yaesu.com  , 81-3-6711-4121 |
| Technical Contact | Randy Ortanez, PCTEST Engineering Lab., Inc., tcb@pctestlab.com  , 410-290-6652 |
| Test Firm | Yuji Ohashi, Intertek Japan K.K.(Kashima Laboratory), yuji.ohashi@intertek.com  , 81-299-82-8464 |
| TCB Email | tcb@pctestlab.com |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change. Power listed is conducted. Occupational/Controlled MPE evaluation covers fixed-mounted operation on towers, roof-tops and similar outdoor permanent structures, for use with a 0dBd antenna and a duty factor not exceeding 50%. The antenna must be installed to provide a separation distance of at least 198 cm from all persons during use with a duty factor not exceeding 50%. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). The grantee must coordinate with responsible parties to ensure the RF exposure requirements for this transmitter are met, including exposure to persons who must comply with general population/uncontrolled requirements. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| tE4aQ21vO4DvG3WwBSf4+Q== | 2011-11-15 | Class II permissive change or modification of presently authorized equipment |
| 8C6Maf19QcgQN/VHXaj+2Q== | 2005-06-29 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 148-174 MHz | 50 | 1.5ppm | 16K0F3E | 22, 74, 9 | |
| 148-174 MHz | 100 | 1.5ppm | 16K0F3E | 22, 74, 9 | BM |
| 148-174 MHz | 50 | 1.5ppm | 11K0F3E | 22, 74, 90.21 | |
| 148-174 MHz | 100 | 1.5ppm | 11K0F3E | 22, 74, 90.21 | BM |
| 150-174 MHz | 50 | 1.5ppm | 16K0F3E | 22, 74, 9 | |
| 150-174 MHz | 100 | 1.5ppm | 16K0F3E | 22, 74, 9 | BM |
| 150-174 MHz | 50 | 1.5ppm | 11K0F3E | 22, 74, 90.21 | |
| 150-174 MHz | 100 | 1.5ppm | 11K0F3E | 22, 74, 90.21 | BM |
Grants
TCB Grant - Application tE4aQ21vO4DvG3WwBSf4+Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PCTEST Engineering Laboratory, Inc. 6660-B Dobbin Road Columbia, MD 21045 |
Date of Grant: 11/15/2011 Application Dated: 11/15/2011 |
| Yaesu Musen Co., Ltd. |
| Tennozu Parkside Building |
| 2-5-8 Higashi-Shinagawa, Shinagawa-ku |
| Tokyo, 140-0002 Japan |
| Attention: Kouji Taguchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K6610443250 |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Rack Mount Repeater |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22, 74, 90 | 150.0 - 174.0 | 50.0 | 1.5 PM | 16K0F3E | |
| BM | 22, 74, 90 | 150.0 - 174.0 | 100.0 | 1.5 PM | 16K0F3E |
| 22, 74, 90.210 | 150.0 - 174.0 | 50.0 | 1.5 PM | 11K0F3E | |
| BM | 22, 74, 90.210 | 150.0 - 174.0 | 100.0 | 1.5 PM | 11K0F3E |
| Class II Permissive Change. Power listed is conducted. Occupational/Controlled MPE evaluation covers fixed-mounted operation on towers, roof-tops and similar outdoor permanent structures, for use with a 0dBd antenna and a duty factor not exceeding 50%. The antenna must be installed to provide a separation distance of at least 198 cm from all persons during use with a duty factor not exceeding 50%. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). The grantee must coordinate with responsible parties to ensure the RF exposure requirements for this transmitter are met, including exposure to persons who must comply with general population/uncontrolled requirements. |
| BM: | The output power is continuously variable from the value listed in this entry to 50%-55% of the value listed. |
EAS Grant - Application tE4aQ21vO4DvG3WwBSf4+Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Yaesu Musen Co., Ltd. Tennozu Parkside Building 2-5-8 Higashi-Shinagawa, Shinagawa-ku Tokyo, 140-0002 Japan |
Date of Grant: 11/15/2011 Application Dated: 11/15/2011 |
| Attention: Kouji Taguchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K6610443250 |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Rack Mount Repeater |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22, 74, 90 | 150.0 - 174.0 | 50.0 | 1.5 PM | 16K0F3E | |
| BM | 22, 74, 90 | 150.0 - 174.0 | 100.0 | 1.5 PM | 16K0F3E |
| 22, 74, 90.210 | 150.0 - 174.0 | 50.0 | 1.5 PM | 11K0F3E | |
| BM | 22, 74, 90.210 | 150.0 - 174.0 | 100.0 | 1.5 PM | 11K0F3E |
| Class II Permissive Change. Power listed is conducted. Occupational/Controlled MPE evaluation covers fixed-mounted operation on towers, roof-tops and similar outdoor permanent structures, for use with a 0dBd antenna and a duty factor not exceeding 50%. The antenna must be installed to provide a separation distance of at least 198 cm from all persons during use with a duty factor not exceeding 50%. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). The grantee must coordinate with responsible parties to ensure the RF exposure requirements for this transmitter are met, including exposure to persons who must comply with general population/uncontrolled requirements. |
| BM: | The output power is continuously variable from the value listed in this entry to 50%-55% of the value listed. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Electrical and Electronic Testing NA, Inc 914 W. Patapsco Avenue Baltimore, MD 21230-3432 |
Date of Grant: 06/29/2005 Application Dated: 06/29/2005 |
| Yaesu Musen Co., Ltd. |
| Tennozu Parkside Building |
| 2-5-8 Higashi-Shinagawa, Shinagawa-ku |
| Tokyo, 140-0002 Japan |
| Attention: Tetsuya Masubuchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K6610443250 |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Rack Mount Repeater |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22, 74, 90 | 148.0 - 174.0 | 50.0 | 1.5 PM | 16K0F3E | |
| BM | 22, 74, 90 | 148.0 - 174.0 | 100.0 | 1.5 PM | 16K0F3E |
| 22, 74, 90.210 | 148.0 - 174.0 | 50.0 | 1.5 PM | 11K0F3E | |
| BM | 22, 74, 90.210 | 148.0 - 174.0 | 100.0 | 1.5 PM | 11K0F3E |
| Power listed is conducted. Occupational/Controlled MPE evaluation covers fixed-mounted operation on towers, roof-tops and similar outdoor permanent structures, for use with a 0dBd antenna and a duty factor not exceeding 50%. The antenna must be installed to provide a separation distance of at least 198 cm from all persons during use with a duty factor not exceeding 50%. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). The grantee must coordinate with responsible parties to ensure the RF exposure requirements for this transmitter are met, including exposure to persons who must comply with general population/uncontrolled requirements. |
| BM: | The output power is continuously variable from the value listed in this entry to 50%-55% of the value listed. |
EAS Grant - Application 8C6Maf19QcgQN/VHXaj+2Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Yaesu Musen Co., Ltd. Tennozu Parkside Building 2-5-8 Higashi-Shinagawa, Shinagawa-ku Tokyo, 140-0002 Japan |
Date of Grant: 06/29/2005 Application Dated: 06/29/2005 |
| Attention: Tetsuya Masubuchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K6610443250 |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Rack Mount Repeater |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22, 74, 90 | 148.0 - 174.0 | 50.0 | 1.5 PM | 16K0F3E | |
| BM | 22, 74, 90 | 148.0 - 174.0 | 100.0 | 1.5 PM | 16K0F3E |
| 22, 74, 90.210 | 148.0 - 174.0 | 50.0 | 1.5 PM | 11K0F3E | |
| BM | 22, 74, 90.210 | 148.0 - 174.0 | 100.0 | 1.5 PM | 11K0F3E |
| Power listed is conducted. Occupational/Controlled MPE evaluation covers fixed-mounted operation on towers, roof-tops and similar outdoor permanent structures, for use with a 0dBd antenna and a duty factor not exceeding 50%. The antenna must be installed to provide a separation distance of at least 198 cm from all persons during use with a duty factor not exceeding 50%. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). The grantee must coordinate with responsible parties to ensure the RF exposure requirements for this transmitter are met, including exposure to persons who must comply with general population/uncontrolled requirements. |
| BM: | The output power is continuously variable from the value listed in this entry to 50%-55% of the value listed. |
| Mail To: |