FCC ID K6610853020
HANDHELD TRANSCEIVER
by Yaesu Musen Co., Ltd.
Grantee Code: K66 Product Code: 10853020
Latest application date: 2009-11-09
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 134-174 MHz | Class II permissive change or modification of presently authorized equipment | 2009-11-09 |
| 134-174 MHz | Original Equipment | 2008-11-05 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual 1 | Users Manual | 2008-11-05 | PDF 1.7 MB |
| Users Manual 2 | Users Manual | 2008-11-05 | PDF 706.5 KB |
| Internal Photos | Internal Photos | 2008-11-05 | PDF 458.8 KB |
| External Photos | External Photos | 2008-11-05 | PDF 898 KB |
| ID Drawing | ID Label/Location Info | 2008-11-05 | PDF 747.3 KB |
| Circuit Description | Operational Description | 2008-11-05 | PDF 30.7 KB |
| Test Setup Photos | Test Setup Photos | 2008-11-05 | PDF 1,012.1 KB |
| Test Report | Test Report | 2009-11-09 | PDF 211 KB |
| Test Report | Test Report | 2008-11-05 | PDF 440.8 KB |
| Compliance Statement 1 | Attestation Statements | 2008-11-05 | PDF 49.4 KB |
| Compliance Statement 2 | Attestation Statements | 2008-11-05 | PDF 51.9 KB |
| Compliance Statement 3 | Attestation Statements | 2008-11-05 | PDF 50.8 KB |
| Cover Letter | Cover Letter(s) | 2009-11-09 | PDF 52.1 KB |
| Compliance Statement 1 | Cover Letter(s) | 2008-11-05 | PDF 49.4 KB |
| Confidential Letter | Cover Letter(s) | 2008-11-05 | PDF 72 KB |
| Justification Letter | Cover Letter(s) | 2008-11-05 | PDF 50.8 KB |
| Alignment | Parts List/Tune Up Info | 2008-11-05 | PDF 102.1 KB |
| Parts List | Parts List/Tune Up Info | 2008-11-05 | PDF 36.3 KB |
Application Information
| Application ID | aPjoj6SdILEwo1vW3sWV5w== |
|---|---|
| Final Action Date | 2009-11-09 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013655220 |
| Model | 10853020 |
| Frequency Range | 134-174 MHz |
| Equipment Class | TNF - Licensed Non-Broadcast Transmitter Held to Face |
| Device Description | HANDHELD TRANSCEIVER |
| Responsible Party | Kouji Taguchi, Engineering Division/Quality Assurance Leader, k.taguchi@yaesu.com  , 81-3-6711-4121 |
| Test Firm | Sid Sanders, Timco Engineering, Inc., tei@timcoengr.com  , 352-472-5500 |
| TCB Email | TEI@TIMCOENGR.COM |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Listed Output Power is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure environment and must operate with a duty factor not exceeding 50%. Body-worn compliance is limited to the specific belt-clip described in the user manual as indicated in this filing. All qualified end-users of this device must have the knowledge to comply with Occupational /Controlled limits and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Requirements and users must be provided with the training information. The output power is continuously variable between the values listed. (Orig. Grant: 11/05/2008) Class II Permissive Change: This Class II Change adds output power continuously variable between 0.25 Watts and the listed power of 5.0 Watts. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| aPjoj6SdILEwo1vW3sWV5w== | 2009-11-09 | Class II permissive change or modification of presently authorized equipment |
| QfYxu6mitK73W6aeSgN1nA== | 2008-11-05 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application QfYxu6mitK73W6aeSgN1nA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 11/05/2008 Application Dated: 11/05/2008 |
| Yaesu Musen Co., Ltd. |
| Tennozu Parkside Building |
| 2-5-8 Higashi-Shinagawa, Shinagawa-ku |
| Tokyo, 140-0002 Japan |
| Attention: Kouji Taguchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K6610853020 |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | Handheld Transceiver |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| EF | 90 | 134.0 - 174.0 | 5.0 | 2.5 PM | 16K0F3E |
| EF | 90 | 134.0 - 174.0 | 1.0 | 2.5 PM | 16K0F3E |
| EF | 90 | 134.0 - 174.0 | 5.0 | 2.5 PM | 11K0F3E |
| EF | 90 | 134.0 - 174.0 | 1.0 | 2.5 PM | 11K0F3E |
| Listed Output Power is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure environment and must operate with a duty factor not exceeding 50%. Body-worn compliance is limited to the specific belt-clip described in the user manual as indicated in this filing. All qualified end-users of this device must have the knowledge to comply with Occupational /Controlled limits and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Requirements and users must be provided with the training information. The output power is continuously variable between the values listed. |
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
EAS Grant - Application QfYxu6mitK73W6aeSgN1nA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Yaesu Musen Co., Ltd. Tennozu Parkside Building 2-5-8 Higashi-Shinagawa, Shinagawa-ku Tokyo, 140-0002 Japan |
Date of Grant: 11/05/2008 Application Dated: 11/05/2008 |
| Attention: Kouji Taguchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K6610853020 |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | Handheld Transceiver |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| EF | 90 | 134.0 - 174.0 | 5.0 | 2.5 PM | 16K0F3E |
| EF | 90 | 134.0 - 174.0 | 1.0 | 2.5 PM | 16K0F3E |
| EF | 90 | 134.0 - 174.0 | 5.0 | 2.5 PM | 11K0F3E |
| EF | 90 | 134.0 - 174.0 | 1.0 | 2.5 PM | 11K0F3E |
| Listed Output Power is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure environment and must operate with a duty factor not exceeding 50%. Body-worn compliance is limited to the specific belt-clip described in the user manual as indicated in this filing. All qualified end-users of this device must have the knowledge to comply with Occupational /Controlled limits and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Requirements and users must be provided with the training information. The output power is continuously variable between the values listed. |
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 11/09/2009 Application Dated: 11/09/2009 |
| Yaesu Musen Co., Ltd. |
| Tennozu Parkside Building |
| 2-5-8 Higashi-Shinagawa, Shinagawa-ku |
| Tokyo, 140-0002 Japan |
| Attention: Kouji Taguchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K6610853020 |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | HANDHELD TRANSCEIVER |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| EF | 90 | 134.0 - 174.0 | 5.0 | 2.5 PM | 16K0F3E |
| EF | 90 | 134.0 - 174.0 | 1.0 | 2.5 PM | 16K0F3E |
| EF | 90 | 134.0 - 174.0 | 5.0 | 2.5 PM | 11K0F3E |
| EF | 90 | 134.0 - 174.0 | 1.0 | 2.5 PM | 11K0F3E |
| Listed Output Power is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure environment and must operate with a duty factor not exceeding 50%. Body-worn compliance is limited to the specific belt-clip described in the user manual as indicated in this filing. All qualified end-users of this device must have the knowledge to comply with Occupational /Controlled limits and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Requirements and users must be provided with the training information. The output power is continuously variable between the values listed. (Orig. Grant: 11/05/2008) Class II Permissive Change: This Class II Change adds output power continuously variable between 0.25 Watts and the listed power of 5.0 Watts.
|
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
EAS Grant - Application aPjoj6SdILEwo1vW3sWV5w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Yaesu Musen Co., Ltd. Tennozu Parkside Building 2-5-8 Higashi-Shinagawa, Shinagawa-ku Tokyo, 140-0002 Japan |
Date of Grant: 11/09/2009 Application Dated: 11/09/2009 |
| Attention: Kouji Taguchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K6610853020 |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | HANDHELD TRANSCEIVER |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| EF | 90 | 134.0 - 174.0 | 5.0 | 2.5 PM | 16K0F3E |
| EF | 90 | 134.0 - 174.0 | 1.0 | 2.5 PM | 16K0F3E |
| EF | 90 | 134.0 - 174.0 | 5.0 | 2.5 PM | 11K0F3E |
| EF | 90 | 134.0 - 174.0 | 1.0 | 2.5 PM | 11K0F3E |
| Listed Output Power is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure environment and must operate with a duty factor not exceeding 50%. Body-worn compliance is limited to the specific belt-clip described in the user manual as indicated in this filing. All qualified end-users of this device must have the knowledge to comply with Occupational /Controlled limits and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Requirements and users must be provided with the training information. The output power is continuously variable between the values listed. (Orig. Grant: 11/05/2008) Class II Permissive Change: This Class II Change adds output power continuously variable between 0.25 Watts and the listed power of 5.0 Watts.
|
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
| Mail To: |