FCC ID K6630283X3S
MARINE TRANSCEIVER
by Yaesu Musen Co., Ltd.
Grantee Code: K66 Product Code: 30283X3S
Latest application date: 2012-11-19
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 156.025-157.425 MHz | Class II permissive change or modification of presently authorized equipment | 2012-11-19 |
| 156.025-157.425 MHz | Original Equipment | 2007-03-09 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| USERS MANUAL | Users Manual | 2007-03-09 | PDF 646.7 KB |
| INTERNAL PHOTOS | Internal Photos | 2007-03-09 | PDF 1.4 MB |
| EXTERNAL PHOTOS | External Photos | 2007-03-09 | PDF 543.2 KB |
| LABEL | ID Label/Location Info | 2007-03-09 | PDF 126.2 KB |
| OPERATIONAL DESCRIPTION | Operational Description | 2007-03-09 | PDF 59.5 KB |
| TEST SETUP PHOTOS | Test Setup Photos | 2007-03-09 | PDF 258.9 KB |
| TEST REPORT | Test Report | 2007-03-09 | PDF 186.9 KB |
| ATTESTATION STATEMENT 1 | Attestation Statements | 2007-03-09 | PDF 12.6 KB |
| ATTESTATION STATEMENT 2 | Attestation Statements | 2007-03-09 | PDF 48.1 KB |
| ATTESTATION STATEMENT 3 | Attestation Statements | 2007-03-09 | PDF 53.4 KB |
| Class II Cover Letter | Cover Letter(s) | 2012-11-19 | PDF 63.6 KB |
| CONFIDENTIALITY LETTER | Cover Letter(s) | 2007-03-09 | PDF 72.9 KB |
| PARTS LIST | Parts List/Tune Up Info | 2007-03-09 | PDF 45.7 KB |
| RF EXPOSURE | RF Exposure Info | 2007-03-09 | PDF 27 KB |
| TUNE UP PROCEDURE | Parts List/Tune Up Info | 2007-03-09 | PDF 67.2 KB |
Application Information
| Application ID | u1Tdubg9LpbbktOQkoaZ2Q== |
|---|---|
| Final Action Date | 2012-11-19 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013655220 |
| Model | 30283X3S |
| Frequency Range | 156.025-157.425 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | MARINE TRANSCEIVER |
| Responsible Party | Kouji Taguchi, Engineering Division/Quality Assurance Leader, k.taguchi@yaesu.com  , 81-3-6711-4121 |
| Test Firm | Sid Sanders, Timco Engineering, Inc., tei@timcoengr.com  , 352-472-5500 |
| TCB Email | tei@timcoengr.com |
| TCB Scope | B3: Maritime & Aviation Radio Services equipment in 47 CFR parts 80 & 87 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Controlled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting RF Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 89 cm from all persons and must not exceed an antenna gain of 3 dBi. CLASS II CHANGE: This Class II Change incorporates a software change so that the integral DSC Class D functions conform to ITU-R M.493-13. 11/16/2012 |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| u1Tdubg9LpbbktOQkoaZ2Q== | 2012-11-19 | Class II permissive change or modification of presently authorized equipment |
| zKkXS4P+YCa864Mp4U4dAQ== | 2007-03-09 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application zKkXS4P+YCa864Mp4U4dAQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 | Date of Grant: 03/09/2007 Application Dated: 03/09/2007 |
| Yaesu Musen Co., Ltd. |
| Tennozu Parkside Building |
| 2-5-8 Higashi-Shinagawa, Shinagawa-ku |
| Tokyo, 140-0002 Japan |
| Attention: Kouji Taguchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K6630283X3S |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | MARINE TRANSCEIVER |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| OW | 80 | 156.025 - 157.425 | 25.0 | 10.0 PM | 16K0G3E |
| OW | 80 | 156.025 - 157.425 | 1.0 | 10.0 PM | 16K0G3E |
| OW | 80 | 156.525 - 156.525 | 25.0 | 10.0 PM | 16K0G2B |
| OW | 80 | 156.525 - 156.525 | 1.0 | 10.0 PM | 16K0G2B |
| Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Controlled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting RF Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 89 cm from all persons and must not exceed an antenna gain of 3 dBi. |
| OW: | Unit meets requirements of Section 80.80(a)(4). |
EAS Grant - Application zKkXS4P+YCa864Mp4U4dAQ==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Yaesu Musen Co., Ltd. Tennozu Parkside Building 2-5-8 Higashi-Shinagawa, Shinagawa-ku Tokyo, 140-0002 Japan | Date of Grant: 03/09/2007 Application Dated: 03/09/2007 |
| Attention: Kouji Taguchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K6630283X3S |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | MARINE TRANSCEIVER |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| OW | 80 | 156.025 - 157.425 | 25.0 | 10.0 PM | 16K0G3E |
| OW | 80 | 156.025 - 157.425 | 1.0 | 10.0 PM | 16K0G3E |
| OW | 80 | 156.525 - 156.525 | 25.0 | 10.0 PM | 16K0G2B |
| OW | 80 | 156.525 - 156.525 | 1.0 | 10.0 PM | 16K0G2B |
| Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Controlled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting RF Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 89 cm from all persons and must not exceed an antenna gain of 3 dBi.
|
| OW: | Unit meets requirements of Section 80.80(a)(4). |
| Mail To: |
| EA740392 |
TCB Grant - Application u1Tdubg9LpbbktOQkoaZ2Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 11/19/2012 Application Dated: 11/19/2012 |
| Yaesu Musen Co., Ltd. |
| Tennozu Parkside Building |
| 2-5-8 Higashi-Shinagawa, Shinagawa-ku |
| Tokyo, 140-0002 Japan |
| Attention: Kouji Taguchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K6630283X3S |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | MARINE TRANSCEIVER |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| OW | 80 | 156.025 - 157.425 | 25.0 | 10.0 PM | 16K0G3E |
| OW | 80 | 156.025 - 157.425 | 1.0 | 10.0 PM | 16K0G3E |
| OW | 80 | 156.025 - 157.425 | 25.0 | 10.0 PM | 16K0G2B |
| OW | 80 | 156.025 - 157.425 | 1.0 | 10.0 PM | 16K0G2B |
| Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Controlled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting RF Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 89 cm from all persons and must not exceed an antenna gain of 3 dBi. CLASS II CHANGE: This Class II Change incorporates a software change so that the integral DSC Class D functions conform to ITU-R M.493-13. 11/16/2012 |
| OW: | Unit meets requirements of Section 80.80(a)(4). |
EAS Grant - Application u1Tdubg9LpbbktOQkoaZ2Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Yaesu Musen Co., Ltd. Tennozu Parkside Building 2-5-8 Higashi-Shinagawa, Shinagawa-ku Tokyo, 140-0002 Japan |
Date of Grant: 11/19/2012 Application Dated: 11/19/2012 |
| Attention: Kouji Taguchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K6630283X3S |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | MARINE TRANSCEIVER |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| OW | 80 | 156.025 - 157.425 | 25.0 | 10.0 PM | 16K0G3E |
| OW | 80 | 156.025 - 157.425 | 1.0 | 10.0 PM | 16K0G3E |
| OW | 80 | 156.025 - 157.425 | 25.0 | 10.0 PM | 16K0G2B |
| OW | 80 | 156.025 - 157.425 | 1.0 | 10.0 PM | 16K0G2B |
| Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population/Controlled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting RF Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 89 cm from all persons and must not exceed an antenna gain of 3 dBi. CLASS II CHANGE: This Class II Change incorporates a software change so that the integral DSC Class D functions conform to ITU-R M.493-13. 11/16/2012 |
| OW: | Unit meets requirements of Section 80.80(a)(4). |
| Mail To: |