FCC ID K6630483X3D
MARINE RADIO
by Yaesu Musen Co., Ltd.
Grantee Code: K66 Product Code: 30483X3D
Latest application date: 2014-01-16
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 156.025-157.425 MHz | Class II permissive change or modification of presently authorized equipment | 2014-01-16 |
| 156.025-157.425 MHz | Class II permissive change or modification of presently authorized equipment | 2012-11-19 |
| 156.025-157.425 MHz | Class II permissive change or modification of presently authorized equipment | 2011-12-21 |
| 156.025-157.425 MHz | Original Equipment | 2011-01-19 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual 1 | Users Manual | 2011-01-19 | PDF 2.7 MB |
| Users Manual 2 | Users Manual | 2011-01-19 | PDF 2.2 MB |
| Internal Photos | Internal Photos | 2014-03-02 | PDF 1.1 MB |
| Internal Photos | Internal Photos | 2011-12-21 | PDF 958.4 KB |
| Internal Photos | Internal Photos | 2011-01-19 | PDF 946.2 KB |
| External Photos | External Photos | 2011-12-21 | PDF 294.9 KB |
| External Photos | External Photos | 2011-01-19 | PDF 383.7 KB |
| Label | ID Label/Location Info | 2011-01-19 | PDF 255.2 KB |
| Circuit Description | Operational Description | 2011-01-19 | PDF 46.9 KB |
| Test Report 1 | Test Report | 2014-01-16 | PDF 128.1 KB |
| Test Report 2 | Test Report | 2014-01-16 | PDF 611.4 KB |
| Test Report | Test Report | 2011-12-21 | PDF 120.2 KB |
| Test Report | Test Report | 2011-01-19 | PDF 417.6 KB |
| Class II Change Letter | Cover Letter(s) | 2014-01-16 | PDF 92.8 KB |
| Confidential Letter | Cover Letter(s) | 2014-01-16 | PDF 308.2 KB |
| Class II Cover Letter | Cover Letter(s) | 2012-11-19 | PDF 63.6 KB |
| Confidential Letter | Cover Letter(s) | 2011-12-21 | PDF 72.3 KB |
| Permission Letter | Cover Letter(s) | 2011-12-21 | PDF 823.1 KB |
| Compliance Statement 1 | Cover Letter(s) | 2011-01-19 | PDF 49.7 KB |
| Compliance Statement 2 | Cover Letter(s) | 2011-01-19 | PDF 51.4 KB |
| Alignment | Parts List/Tune Up Info | 2011-01-19 | PDF 44.7 KB |
| MPE Calculation | RF Exposure Info | 2011-01-19 | PDF 176 KB |
| Parts List | Parts List/Tune Up Info | 2011-01-19 | PDF 37.7 KB |
Application Information
| Application ID | rW852y3jqAT0Ut5ifmfP4g== |
|---|---|
| Final Action Date | 2014-01-16 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013655220 |
| Model | 30483X3D |
| Frequency Range | 156.025-157.425 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | MARINE RADIO |
| Responsible Party | Kouji Taguchi, Engineering Division/Quality Assurance Leader, k.taguchi@yaesu.com  , 81-3-6711-4121 |
| Test Firm | Sid Sanders, Timco Engineering, Inc., tei@timcoengr.com  , 352-472-5500 |
| TCB Email | TEI@TIMCOENGR.COM |
| TCB Scope | B3: Maritime & Aviation Radio Services equipment in 47 CFR parts 80 & 87 |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 03/02/2014 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted at the antenna terminals. The duty factor is not to exceed 50%. The antenna used for this transmitter must be installed to provide a separation distance of at least 89 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitting operating conditions for satisfying RF exposure compliance. Class II Permissive Change: This Class II Permissive adds a built-in GPS to the original device. 12/21/2011 CLASS II CHANGE: This Class II Change incorporates a software change so that the integral DSC Class D functions conform to ITU-R M.493-13. 11/16/2012 Class II Change: This change incorporates a software change to the integral GPS receiver. 01/14/2014 |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| rW852y3jqAT0Ut5ifmfP4g== | 2014-01-16 | Class II permissive change or modification of presently authorized equipment |
| YtYHGYiRI9bZOX0EOtyAlw== | 2012-11-19 | Class II permissive change or modification of presently authorized equipment |
| 1mM7z9XU8DphdL+hrsqlmw== | 2011-12-21 | Class II permissive change or modification of presently authorized equipment |
| KwNwxCsT43F2xTpgqyp9Cw== | 2011-01-19 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application YtYHGYiRI9bZOX0EOtyAlw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 11/19/2012 Application Dated: 11/19/2012 |
| Yaesu Musen Co., Ltd. |
| Tennozu Parkside Building |
| 2-5-8 Higashi-Shinagawa, Shinagawa-ku |
| Tokyo, 140-0002 Japan |
| Attention: Kouji Taguchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K6630483X3D |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | MARINE RADIO |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 80 | 156.025 - 157.425 | 25.0 | 10.0 PM | 16K0G3E | |
| 80 | 156.025 - 157.425 | 1.0 | 10.0 PM | 16K0G3E | |
| 80 | 156.025 - 157.425 | 25.0 | 10.0 PM | 16K0G2B | |
| 80 | 156.025 - 157.425 | 1.0 | 10.0 PM | 16K0G2B |
| Power listed is conducted at the antenna terminals. The duty factor is not to exceed 50%. The antenna used for this transmitter must be installed to provide a separation distance of at least 89 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitting operating conditions for satisfying RF exposure compliance. Class II Permissive Change: This Class II Permissive adds a built-in GPS to the original device. 12/21/2011 CLASS II CHANGE: This Class II Change incorporates a software change so that the integral DSC Class D functions conform to ITU-R M.493-13. 11/16/2012
|
EAS Grant - Application YtYHGYiRI9bZOX0EOtyAlw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Yaesu Musen Co., Ltd. Tennozu Parkside Building 2-5-8 Higashi-Shinagawa, Shinagawa-ku Tokyo, 140-0002 Japan |
Date of Grant: 11/19/2012 Application Dated: 11/19/2012 |
| Attention: Kouji Taguchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K6630483X3D |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | MARINE RADIO |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 80 | 156.025 - 157.425 | 25.0 | 10.0 PM | 16K0G3E | |
| 80 | 156.025 - 157.425 | 1.0 | 10.0 PM | 16K0G3E | |
| 80 | 156.025 - 157.425 | 25.0 | 10.0 PM | 16K0G2B | |
| 80 | 156.025 - 157.425 | 1.0 | 10.0 PM | 16K0G2B |
| Power listed is conducted at the antenna terminals. The duty factor is not to exceed 50%. The antenna used for this transmitter must be installed to provide a separation distance of at least 89 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitting operating conditions for satisfying RF exposure compliance. Class II Permissive Change: This Class II Permissive adds a built-in GPS to the original device. 12/21/2011 CLASS II CHANGE: This Class II Change incorporates a software change so that the integral DSC Class D functions conform to ITU-R M.493-13. 11/16/2012
|
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 01/16/2014 Application Dated: 01/15/2014 |
| Yaesu Musen Co., Ltd. |
| Tennozu Parkside Building |
| 2-5-8 Higashi-Shinagawa, Shinagawa-ku |
| Tokyo, 140-0002 Japan |
| Attention: Kouji Taguchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K6630483X3D |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | MARINE RADIO |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 80 | 156.025 - 157.425 | 25.0 | 10.0 PM | 16K0G3E | |
| 80 | 156.025 - 157.425 | 1.0 | 10.0 PM | 16K0G3E | |
| 80 | 156.025 - 157.425 | 25.0 | 10.0 PM | 16K0G2B | |
| 80 | 156.025 - 157.425 | 1.0 | 10.0 PM | 16K0G2B |
| Power listed is conducted at the antenna terminals. The duty factor is not to exceed 50%. The antenna used for this transmitter must be installed to provide a separation distance of at least 89 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitting operating conditions for satisfying RF exposure compliance. Class II Permissive Change: This Class II Permissive adds a built-in GPS to the original device. 12/21/2011 CLASS II CHANGE: This Class II Change incorporates a software change so that the integral DSC Class D functions conform to ITU-R M.493-13. 11/16/2012 Class II Change: This change incorporates a software change to the integral GPS receiver. 01/14/2014 |
EAS Grant - Application rW852y3jqAT0Ut5ifmfP4g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Yaesu Musen Co., Ltd. Tennozu Parkside Building 2-5-8 Higashi-Shinagawa, Shinagawa-ku Tokyo, 140-0002 Japan |
Date of Grant: 01/16/2014 Application Dated: 01/15/2014 |
| Attention: Kouji Taguchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K6630483X3D |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | MARINE RADIO |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 80 | 156.025 - 157.425 | 25.0 | 10.0 PM | 16K0G3E | |
| 80 | 156.025 - 157.425 | 1.0 | 10.0 PM | 16K0G3E | |
| 80 | 156.025 - 157.425 | 25.0 | 10.0 PM | 16K0G2B | |
| 80 | 156.025 - 157.425 | 1.0 | 10.0 PM | 16K0G2B |
| Power listed is conducted at the antenna terminals. The duty factor is not to exceed 50%. The antenna used for this transmitter must be installed to provide a separation distance of at least 89 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitting operating conditions for satisfying RF exposure compliance. Class II Permissive Change: This Class II Permissive adds a built-in GPS to the original device. 12/21/2011 CLASS II CHANGE: This Class II Change incorporates a software change so that the integral DSC Class D functions conform to ITU-R M.493-13. 11/16/2012 Class II Change: This change incorporates a software change to the integral GPS receiver. 01/14/2014 |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 01/19/2011 Application Dated: 01/19/2011 |
| Yaesu Musen Co., Ltd. |
| Tennozu Parkside Building |
| 2-5-8 Higashi-Shinagawa, Shinagawa-ku |
| Tokyo, 140-0002 Japan |
| Attention: Kouji Taguchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K6630483X3D |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | MARINE TRANSCEIVER |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 80 | 156.025 - 157.425 | 25.0 | 10.0 PM | 15K0G3E | |
| 80 | 156.025 - 157.425 | 1.0 | 10.0 PM | 16K0G3E | |
| 80 | 156.025 - 157.425 | 25.0 | 10.0 PM | 16K0G2B | |
| 80 | 156.025 - 157.425 | 1.0 | 10.0 PM | 16K0G2B |
| Power listed is conducted at the antenna terminals. The duty factor is not to exceed 50%. The antenna used for this transmitter must be installed to provide a separation distance of at least 89 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitting operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application KwNwxCsT43F2xTpgqyp9Cw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Yaesu Musen Co., Ltd. Tennozu Parkside Building 2-5-8 Higashi-Shinagawa, Shinagawa-ku Tokyo, 140-0002 Japan |
Date of Grant: 01/19/2011 Application Dated: 01/19/2011 |
| Attention: Kouji Taguchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K6630483X3D |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | MARINE TRANSCEIVER |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 80 | 156.025 - 157.425 | 25.0 | 10.0 PM | 15K0G3E | |
| 80 | 156.025 - 157.425 | 1.0 | 10.0 PM | 16K0G3E | |
| 80 | 156.025 - 157.425 | 25.0 | 10.0 PM | 16K0G2B | |
| 80 | 156.025 - 157.425 | 1.0 | 10.0 PM | 16K0G2B |
| Power listed is conducted at the antenna terminals. The duty factor is not to exceed 50%. The antenna used for this transmitter must be installed to provide a separation distance of at least 89 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitting operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 12/21/2011 Application Dated: 12/21/2011 |
| Yaesu Musen Co., Ltd. |
| Tennozu Parkside Building |
| 2-5-8 Higashi-Shinagawa, Shinagawa-ku |
| Tokyo, 140-0002 Japan |
| Attention: Kouji Taguchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K6630483X3D |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | MARINE RADIO |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 80 | 156.025 - 157.425 | 25.0 | 10.0 PM | 16K0G3E | |
| 80 | 156.025 - 157.425 | 1.0 | 10.0 PM | 16K0G3E | |
| 80 | 156.025 - 157.425 | 1.0 | 10.0 PM | 16K0G2B |
| Power listed is conducted at the antenna terminals. The duty factor is not to exceed 50%. The antenna used for this transmitter must be installed to provide a separation distance of at least 89 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitting operating conditions for satisfying RF exposure compliance. Class II Permissive Change: This Class II Permissive adds a built-in GPS to the original device. |
EAS Grant - Application 1mM7z9XU8DphdL+hrsqlmw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Yaesu Musen Co., Ltd. Tennozu Parkside Building 2-5-8 Higashi-Shinagawa, Shinagawa-ku Tokyo, 140-0002 Japan |
Date of Grant: 12/21/2011 Application Dated: 12/21/2011 |
| Attention: Kouji Taguchi , Engineering Division/Quality Assurance Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | K6630483X3D |
| Name of Grantee: | Yaesu Musen Co., Ltd. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | MARINE RADIO |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 80 | 156.025 - 157.425 | 25.0 | 10.0 PM | 16K0G3E | |
| 80 | 156.025 - 157.425 | 1.0 | 10.0 PM | 16K0G3E | |
| 80 | 156.025 - 157.425 | 1.0 | 10.0 PM | 16K0G2B |
| Power listed is conducted at the antenna terminals. The duty factor is not to exceed 50%. The antenna used for this transmitter must be installed to provide a separation distance of at least 89 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitting operating conditions for satisfying RF exposure compliance. Class II Permissive Change: This Class II Permissive adds a built-in GPS to the original device. |
| Mail To: |