FCC ID K7SF7D4515V1B

ScreenCast AV 4 - Receiver

by Belkin International, Inc.

Grantee Code: K7S   Product Code: F7D4515V1B
Latest application date: 2011-10-19

FCC ID Device Details

FCC IDK7SF7D4515V1B
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeK7S
Product CodeF7D4515V1B
Applicant BusinessBelkin International, Inc. 🇺🇸
Related Domains belkin.com tw.bureauveritas.com
Equipment ClassScreenCast AV 4 - Receiver
Test FirmBureau Veritas CPS (H.K.) Ltd. Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5745-5825 MHzOriginal Equipment2011-10-19
5180-5240 MHzOriginal Equipment2011-10-19

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2011-10-19PDF 818.7 KB
Int Pho_K7SF7D4515V1BInternal Photos2011-10-19PDF 160.4 KB
Ext Pho_K7SF7D4515V1BExternal Photos2011-10-19PDF 155.4 KB
Label Loc_K7SF7D4515V1BID Label/Location Info2011-10-19PDF 54.4 KB
Label Smpl_K7SF7D4515V1BID Label/Location Info2011-10-19PDF 728.2 KB
OpDesc_K7SF7D4515V1BOperational Description2011-10-19PDF 31 KB
Test Setup PhotosTest Setup Photos2011-10-19PDF 74.9 KB
Test Setup Photos - 15BTest Setup Photos2011-10-19PDF 75.6 KB
Test Report - 15BTest Report2011-10-19PDF 169.1 KB
Test Report - 15CTest Report2011-10-19PDF 394.3 KB
Test Report - 15ETest Report2011-10-19PDF 454.6 KB
Attestation Statement Channel DeclarationAttestation Statements2011-10-19PDF 24.8 KB
Confidentiality RequestCover Letter(s)2011-10-19PDF 22.3 KB
Coverletter-POA_K7SF7D4515V1BCover Letter(s)2011-10-19PDF 26.7 KB
RF Exposure InfoRF Exposure Info2011-10-19PDF 29.2 KB

Application Information

Application IDuTTP42Cw06x159U+FJVRPQ==
Final Action Date2011-10-19
Application PurposeOriginal Equipment
Applicant FRN0008128605
ModelF7D4515V1B
Frequency Range5745-5825 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionScreenCast AV 4 - Receiver
Responsible PartyDaniel Wesey, EMC Regulatory Compliance Engineer, danielw@belkin.com , (310) 751-2816
Technical ContactGary Chang, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, gary.chang@tw.bureauveritas.com , 886-3-3183232
Non-Technical ContactNatacha Chen, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, natacha.chen@tw.bureauveritas.com , 886-3-3183232
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, richard.chen@tw.bureauveritas.com , 886-3-3183232
TCB Emailcertification@curtis-straus.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Applications

Application IDDatePurpose
uTTP42Cw06x159U+FJVRPQ==2011-10-19Original Equipment
sHGJJ+l4XU+2HwivvXC4Pw==2011-10-19Original Equipment
oItOVsyIB4SDqSqiQAxaSA==2011-10-19Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
15B19, CC
5180-5240 MHz0.043000015E19, CC
5745-5825 MHz0.151000015C19, CC

Grants

TCB Grant - Application uTTP42Cw06x159U+FJVRPQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 10/19/2011

Application Dated: 10/19/2011
Belkin International, Inc.
12045 East Waterfront Dr.
Playa Vista, CA 90094
 
Attention: Daniel Wesey , EMC Regulatory Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  K7SF7D4515V1B
Name of Grantee:  Belkin International, Inc.
Equipment Class: Digital Transmission System
Notes: ScreenCast AV 4 - Receiver
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
19 CC 15C 5745.0  -  5825.0 0.151  

Output power listed is conducted. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

19: This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application uTTP42Cw06x159U+FJVRPQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Belkin International, Inc.
12045 East Waterfront Dr.
Playa Vista, CA 90094
United States
  Date of Grant: 10/19/2011

Application Dated: 10/19/2011
 
Attention: Daniel Wesey , EMC Regulatory Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  K7SF7D4515V1B
Name of Grantee:  Belkin International, Inc.
Equipment Class: Digital Transmission System
Notes: ScreenCast AV 4 - Receiver
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
19 CC 15C 5745.0  -  5825.0 0.151  

Output power listed is conducted. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.


19: This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application sHGJJ+l4XU+2HwivvXC4Pw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 10/19/2011

Application Dated: 10/19/2011
Belkin International, Inc.
12045 East Waterfront Dr.
Playa Vista, CA 90094
 
Attention: Daniel Wesey , EMC Regulatory Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  K7SF7D4515V1B
Name of Grantee:  Belkin International, Inc.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: ScreenCast AV 4 - Receiver
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
19 CC 15B  - 


19: This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application sHGJJ+l4XU+2HwivvXC4Pw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Belkin International, Inc.
12045 East Waterfront Dr.
Playa Vista, CA 90094
United States
  Date of Grant: 10/19/2011

Application Dated: 10/19/2011
 
Attention: Daniel Wesey , EMC Regulatory Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  K7SF7D4515V1B
Name of Grantee:  Belkin International, Inc.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: ScreenCast AV 4 - Receiver
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
19 CC 15B  - 


19: This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application oItOVsyIB4SDqSqiQAxaSA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 10/19/2011

Application Dated: 10/19/2011
Belkin International, Inc.
12045 East Waterfront Dr.
Playa Vista, CA 90094
 
Attention: Daniel Wesey , EMC Regulatory Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  K7SF7D4515V1B
Name of Grantee:  Belkin International, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: ScreenCast AV 4 - Receiver
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
19 CC 15E 5180.0  -  5240.0 0.043  

Output power listed is conducted. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

19: This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application oItOVsyIB4SDqSqiQAxaSA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Belkin International, Inc.
12045 East Waterfront Dr.
Playa Vista, CA 90094
United States
  Date of Grant: 10/19/2011

Application Dated: 10/19/2011
 
Attention: Daniel Wesey , EMC Regulatory Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  K7SF7D4515V1B
Name of Grantee:  Belkin International, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: ScreenCast AV 4 - Receiver
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
19 CC 15E 5180.0  -  5240.0 0.043  

Output power listed is conducted. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.


19: This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: