FCC ID KA22002080002-1
802.11 a/b Band PCI Adapter
by D-Link Corporation
Grantee Code: KA2 Product Code: 20020800021
Latest application date: 2002-11-20
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5320 MHz | Original Equipment | 2002-11-20 |
| 2412-2462 MHz | Original Equipment | 2002-11-20 |
| 2412-2462 MHz | Original Equipment | 2002-10-09 |
| 5180-5320 MHz | Original Equipment | 2002-10-09 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| USer Manual 2 of 2 | Users Manual | 2002-11-20 | PDF 3 MB |
| User Manual 1 of 2 | Users Manual | 2002-11-20 | PDF 1.3 MB |
| User Manual 1of 2 | Users Manual | 2002-11-20 | PDF 1.3 MB |
| User Manual 2 of 2 | Users Manual | 2002-11-20 | PDF 3 MB |
| Revised user manual 1 of 2 Metadata only | Users Manual | PDF 1.3 MB | |
| Revised user manual 2 of 2 Metadata only | Users Manual | PDF 3 MB | |
| Internal Photos | Internal Photos | 2002-11-20 | PDF 3.4 MB |
| External Antenna construction | External Photos | 2002-11-20 | PDF 67.3 KB |
| External Photos | External Photos | 2002-11-20 | PDF 499.3 KB |
| External antenna construction | External Photos | 2002-11-20 | PDF 67.3 KB |
| Antenna port Metadata only | External Photos | PDF 653.1 KB | |
| FCC ID label format and location | ID Label/Location Info | 2002-11-20 | PDF 93.6 KB |
| Setup Photos | Test Setup Photos | 2002-11-20 | PDF 497 KB |
| Test Setup Photos | Test Setup Photos | 2002-11-20 | PDF 609.1 KB |
| UNII Test setup photos Metadata only | Test Setup Photos | PDF 609.1 KB | |
| DTS Test Report | Test Report | 2002-11-20 | PDF 3.6 MB |
| UNII Test Data plots 1 of 2 | Test Report | 2002-11-20 | PDF 3.8 MB |
| UNII Test Data plots 2 of 2 | Test Report | 2002-11-20 | PDF 2.8 MB |
| UNII Test Report Main | Test Report | 2002-11-20 | PDF 1.9 MB |
| DTS Test report Metadata only | Test Report | PDF 3.6 MB | |
| Test Data 1 of 2 Metadata only | Test Report | PDF 3.8 MB | |
| Test Data 2 of 2 Metadata only | Test Report | PDF 2.8 MB | |
| UNII Main Test report Metadata only | Test Report | PDF 1.9 MB | |
| Manufacturer statement to address Integral antenna requirement | Cover Letter(s) | 2002-11-20 | PDF 190 KB |
| Manufacturer statement to comply Integral Antenna Requirement | Cover Letter(s) | 2002-11-20 | PDF 190 KB |
| Modification report | Cover Letter(s) | 2002-11-20 | PDF 3.2 MB |
| Request for confidentiality letter | Cover Letter(s) | 2002-11-20 | PDF 37.3 KB |
| Rquest for confidentiality letter | Cover Letter(s) | 2002-11-20 | PDF 37.3 KB |
| TCB Q and A | Cover Letter(s) | 2002-11-20 | PDF 43.7 KB |
| TCB Q and A | Cover Letter(s) | 2002-11-20 | PDF 43.7 KB |
| TCB Q and A | Cover Letter(s) | PDF 43 KB | |
| External Antenna specification | Parts List/Tune Up Info | 2002-11-20 | PDF 2.1 MB |
| External antenna specification | Parts List/Tune Up Info | 2002-11-20 | PDF 2.1 MB |
| Internal Antenna Specification | Parts List/Tune Up Info | 2002-11-20 | PDF 595.1 KB |
| Internal antenna specification | Parts List/Tune Up Info | 2002-11-20 | PDF 595.1 KB |
| MPE Estimate | RF Exposure Info | 2002-11-20 | PDF 50.5 KB |
| MPE Estimate | RF Exposure Info | 2002-11-20 | PDF 50.5 KB |
| Internal Antenna specification Metadata only | Parts List/Tune Up Info | PDF 595.1 KB | |
| MPE Estimate Metadata only | RF Exposure Info | PDF 20 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 7 KB | |
| Schematic Diagram Metadata only | Schematics | PDF 128.1 KB | |
| Schematic diagram Metadata only | Schematics | PDF 128.1 KB | |
| Theory of operation Metadata only | Operational Description | PDF 101.5 KB |
Application Information
| Application ID | SsJBDS7Y2qVJZV8u2XoR3Q== |
|---|---|
| Final Action Date | 2002-11-20 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0007371172 |
| Model | 2002080002-1 |
| Frequency Range | 5180-5320 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | 802.11 a/b Band PCI Adapter |
| Responsible Party | Brett Adair, General Counsel, brett.adair@dlink.com  , 714-885-6282 |
| Agent | Steve Steve Steve, Compliance Certification Services, scheng@ccsemc.com  , 408-463-0885 |
| Test Firm | Steve Cheng, Compliance Certification Services Inc, scheng@ccsemc.com , 408-463-0885 |
| TCB Email | mkuo@ccsemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Ouput power listed is conducted. This device must be marketed for indoor use only. One external antenna with 5.6dBi peak gain and two alternate internal antennas with 3.25dBi and 5.0dBi peak gain are included in this filing. When internal antenna is installed in the typical desktop computer, the internal antenna must be installed by D-Link or authorized OEM facilities. The external and internal antennas must be constructed to comply with integral antenna requirements as documented in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| SsJBDS7Y2qVJZV8u2XoR3Q== | 2002-11-20 | Original Equipment |
| KsjhR897OTbaOFJiRv/TBg== | 2002-11-20 | Original Equipment |
| HcIJg3fo66ex9asKMH765Q== | 2002-10-09 | Original Equipment |
| 0phpaxXoHN+pYRY4LqwKYA== | 2002-10-09 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application SsJBDS7Y2qVJZV8u2XoR3Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 11/20/2002 Application Dated: 11/20/2002 |
| D-Link Corporation |
| 14420 Myford Road |
| Suite 100 |
| Irvine, CA 92606 |
| Attention: Brett Adair , General Counsel |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA22002080002-1 |
| Name of Grantee: | D-Link Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b Band PCI Adapter |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15E | 5180.0 - 5320.0 | 0.05 | ||
| 15E | 5745.0 - 5805.0 | 0.053 |
| Ouput power listed is conducted. This device must be marketed for indoor use only. One external antenna with 5.6dBi peak gain and two alternate internal antennas with 3.25dBi and 5.0dBi peak gain are included in this filing. When internal antenna is installed in the typical desktop computer, the internal antenna must be installed by D-Link or authorized OEM facilities. The external and internal antennas must be constructed to comply with integral antenna requirements as documented in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application SsJBDS7Y2qVJZV8u2XoR3Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
D-Link Corporation 14420 Myford Road Suite 100 Irvine, CA 92606 United States |
Date of Grant: 11/20/2002 Application Dated: 11/20/2002 |
| Attention: Brett Adair , General Counsel |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA22002080002-1 |
| Name of Grantee: | D-Link Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b Band PCI Adapter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15E | 5180.0 - 5320.0 | 0.05 | ||
| 15E | 5745.0 - 5805.0 | 0.053 |
| Ouput power listed is conducted. This device must be marketed for indoor use only. One external antenna with 5.6dBi peak gain and two alternate internal antennas with 3.25dBi and 5.0dBi peak gain are included in this filing. When internal antenna is installed in the typical desktop computer, the internal antenna must be installed by D-Link or authorized OEM facilities. The external and internal antennas must be constructed to comply with integral antenna requirements as documented in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 11/20/2002 Application Dated: 11/20/2002 |
| D-Link Corporation |
| 14420 Myford Road |
| Suite 100 |
| Irvine, CA 92606 |
| Attention: Brett Adair , General Counsel |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA22002080002-1 |
| Name of Grantee: | D-Link Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b Band PCI Adapter |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2412.0 - 2462.0 | 0.123 |
| Ouput power listed is conducted. This device must be marketed for indoor use only. One external antenna with 5.6dBi peak gain and two alternate internal antennas with 3.25dBi and 5.0dBi peak gain are included in this filing. When internal antenna is installed in the typical desktop computer, the internal antenna must be installed by D-Link or authorized OEM facilities. The external and internal antennas must be constructed to comply with integral antenna requirements as documented in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application KsjhR897OTbaOFJiRv/TBg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
D-Link Corporation 14420 Myford Road Suite 100 Irvine, CA 92606 United States |
Date of Grant: 11/20/2002 Application Dated: 11/20/2002 |
| Attention: Brett Adair , General Counsel |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA22002080002-1 |
| Name of Grantee: | D-Link Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b Band PCI Adapter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2412.0 - 2462.0 | 0.123 |
| Ouput power listed is conducted. This device must be marketed for indoor use only. One external antenna with 5.6dBi peak gain and two alternate internal antennas with 3.25dBi and 5.0dBi peak gain are included in this filing. When internal antenna is installed in the typical desktop computer, the internal antenna must be installed by D-Link or authorized OEM facilities. The external and internal antennas must be constructed to comply with integral antenna requirements as documented in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: |