FCC ID KA2AP1520A1

Wireless AC750 Dual Band Range Extender

by D-Link Corporation

Grantee Code: KA2   Product Code: AP1520A1
Latest application date: 2016-05-04

FCC ID Device Details

FCC IDKA2AP1520A1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeKA2
Product CodeAP1520A1
Applicant BusinessD-Link Corporation 🇺🇸
Related Domains dlink.com icertifi.com.tw
Equipment ClassWireless AC750 Dual Band Range Extender
Test FirmInternational Certification Corp.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2016-05-04
5180-5240 MHzOriginal Equipment2013-11-19
2412-2462 MHzOriginal Equipment2013-11-19

Exhibits

DocumentTypeAvailableFile
user manualUsers Manual2013-11-19PDF 2.7 MB
internal photoInternal Photos2013-11-19PDF 1.1 MB
external photoExternal Photos2013-11-19PDF 90.2 KB
ID label/LocationID Label/Location Info2013-11-19PDF 242 KB
operational descriptionOperational Description2013-11-19PDF 92.9 KB
Test setup photoTest Setup Photos2016-05-04PDF 803.2 KB
test setup photoTest Setup Photos2013-11-19PDF 591.6 KB
Test report_-co-locationTest Report2016-05-04PDF 470.4 KB
Test report_NIITest Report2016-05-04PDF 1.6 MB
Test report_15.247 2.4GTest Report2013-11-19PDF 3.6 MB
Test report_15.247 5GTest Report2013-11-19PDF 3 MB
Test report_Part 15.407Test Report2013-11-19PDF 1.5 MB
Test report_co-locatedTest Report2013-11-19PDF 305.5 KB
Authorization contact personCover Letter(s)2016-05-04PDF 252.1 KB
C2PCCover Letter(s)2016-05-04PDF 21.2 KB
ConfidentialCover Letter(s)2016-05-04PDF 22.8 KB
POACover Letter(s)2016-05-04PDF 26.8 KB
Ad hoc declarationCover Letter(s)2013-11-19PDF 78.4 KB
DoCCover Letter(s)2013-11-19PDF 86.5 KB
POACover Letter(s)2013-11-19PDF 63.3 KB
confidentialityCover Letter(s)2013-11-19PDF 120.8 KB
MPERF Exposure Info2016-05-04PDF 279.4 KB
RF exposureRF Exposure Info2013-11-19PDF 134.3 KB
SW security letter for UNII Metadata onlyOperational DescriptionPDF 192.7 KB

Application Information

Application IDUcw0ZvRhCTNBRFLqB3B6Qw==
Final Action Date2016-05-04
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0007371172
ModelAP1520A1
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWireless AC750 Dual Band Range Extender
Responsible PartyBrett Adair, General Counsel, brett.adair@dlink.com , 714-885-6282
AgentGary Gary Gary, International Certification Corp., GaryChang@icertifi.com.tw , 886-3-271-8628
Technical ContactGary Chang, International Certification Corp., GaryChang@icertifi.com.tw , 886-3-271-8628
Non-Technical ContactWendy Liao, International Certification Corp., wendyLiao@icertifi.com.tw , 886-3-271-8629
Test FirmFu-Cheng Chuang, International Certification Corp., Jeff@icertifi.com.tw , 886-3-271-8666
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operations in 5150-5250 MHz band is for indoor use only. This device has a 20/40/80 MHz bandwidth mode. The 80 MHz mode is limited to channel at 5210 MHz AND 5775 MHz.

Applications

Application IDDatePurpose
Ucw0ZvRhCTNBRFLqB3B6Qw==2016-05-04Class II permissive change or modification of presently authorized equipment
fPVc8FAetFw0B4rlheiuOg==2013-11-19Original Equipment
Ug5I0Pz+0KqunNlrJk7b6A==2013-11-19Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.515CCC
5180-5240 MHz0.20115E38, CC
5180-5240 MHz0.047000015ECC
5745-5825 MHz0.09315E38, CC
5745-5825 MHz0.5715CCC, MO

Grants

TCB Grant - Application Ug5I0Pz+0KqunNlrJk7b6A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Edisonstraat 12a
Zevenaar, NL-6902 PK
Netherlands
Date of Grant: 11/19/2013

Application Dated: 11/18/2013
D Link Corporation
17595 Mt. Herrmann
Fountain Valley, CA 92708
 
Attention: Michael Boschma , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2AP1520A1
Name of Grantee:  D Link Corporation
Equipment Class: Digital Transmission System
Notes: Wireless AC750 Dual Band Range Extender
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.5  
CC MO 15C 5745.0  -  5825.0 0.57  

Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5775 MHz.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Ug5I0Pz+0KqunNlrJk7b6A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

D Link Corporation
17595 Mt. Herrmann
Fountain Valley, CA 92708
United States
  Date of Grant: 11/19/2013

Application Dated: 11/18/2013
 
Attention: Michael Boschma , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2AP1520A1
Name of Grantee:  D Link Corporation
Equipment Class: Digital Transmission System
Notes: Wireless AC750 Dual Band Range Extender
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.5  
CC MO 15C 5745.0  -  5825.0 0.57  

Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5775 MHz.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application Ucw0ZvRhCTNBRFLqB3B6Qw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 05/04/2016

Application Dated: 05/03/2016
D-Link Corporation
14420 Myford Road
Suite 100
Irvine, CA 92606
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2AP1520A1
Name of Grantee:  D-Link Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless AC750 Dual Band Range Extender
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.201  
38 CC 15E 5745.0  -  5825.0 0.093  

Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operations in 5150-5250 MHz band is for indoor use only. This device has a 20/40/80 MHz bandwidth mode. The 80 MHz mode is limited to channel at 5210 MHz AND 5775 MHz.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Ucw0ZvRhCTNBRFLqB3B6Qw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

D-Link Corporation
14420 Myford Road Suite 100
Irvine, CA 92606
United States
  Date of Grant: 05/04/2016

Application Dated: 05/03/2016
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2AP1520A1
Name of Grantee:  D-Link Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless AC750 Dual Band Range Extender
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.201  
38 CC 15E 5745.0  -  5825.0 0.093  

Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operations in 5150-5250 MHz band is for indoor use only. This device has a 20/40/80 MHz bandwidth mode. The 80 MHz mode is limited to channel at 5210 MHz AND 5775 MHz.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application fPVc8FAetFw0B4rlheiuOg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Edisonstraat 12a
Zevenaar, NL-6902 PK
Netherlands
Date of Grant: 11/19/2013

Application Dated: 11/18/2013
D Link Corporation
17595 Mt. Herrmann
Fountain Valley, CA 92708
 
Attention: Michael Boschma , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2AP1520A1
Name of Grantee:  D Link Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless AC750 Dual Band Range Extender
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.047  

Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operations in 5150-5250 MHz band is for indoor use only. This device has a 20/40/80 MHz bandwidth mode. The 80 MHz mode is limited to channel at 5210 MHz.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application fPVc8FAetFw0B4rlheiuOg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

D Link Corporation
17595 Mt. Herrmann
Fountain Valley, CA 92708
United States
  Date of Grant: 11/19/2013

Application Dated: 11/18/2013
 
Attention: Michael Boschma , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2AP1520A1
Name of Grantee:  D Link Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless AC750 Dual Band Range Extender
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.047  

Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operations in 5150-5250 MHz band is for indoor use only. This device has a 20/40/80 MHz bandwidth mode. The 80 MHz mode is limited to channel at 5210 MHz.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: