FCC ID KA2AP2610A1

Wireless AC1300 Concurrent Dual Band PoE Access Point

by D-Link Corporation

Grantee Code: KA2   Product Code: AP2610A1
Latest application date: 2018-05-02

FCC ID Device Details

FCC IDKA2AP2610A1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeKA2
Product CodeAP2610A1
Applicant BusinessD-Link Corporation 🇺🇸
Related Domains dlink.com
Equipment ClassWireless AC1300 Concurrent Dual Band PoE Access Point
Test FirmBureau Veritas CPS (H.K.) Ltd., Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-05-02
5180-5240 MHzOriginal Equipment2016-11-09
2412-2462 MHzOriginal Equipment2016-11-09

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2016-11-09PDF 308.9 KB
Internal PhotosInternal Photos2016-11-09PDF 1.6 MB
External PhotosExternal Photos2016-11-09PDF 860.3 KB
Label LocationID Label/Location Info2016-11-09PDF 48.9 KB
Label SampleID Label/Location Info2016-11-09PDF 699.6 KB
Test Setup PhotosTest Setup Photos2018-05-02PDF 548.3 KB
Test Setup Photos 1 DFS MasterTest Setup Photos2018-05-02PDF 150.4 KB
Test Setup Photos 2 DFS ClientTest Setup Photos2018-05-02PDF 103 KB
Test Setup PhotoTest Setup Photos2016-11-09PDF 576.7 KB
Test Report DFS ClientTest Report2018-05-02PDF 886.8 KB
Test Report DFS MasterTest Report2018-05-02PDF 3.1 MB
Test Report NIITest Report2018-05-02PDF 1.3 MB
Test Report (DTS) rev 2Test Report2016-11-09PDF 1.8 MB
Test Report (NII) revTest Report2016-11-09PDF 1.7 MB
DFS Master DeclarationAttestation Statements2018-05-02PDF 16 KB
Attestation - Channel and Mode DeclarationAttestation Statements2016-11-09PDF 14.9 KB
Agent AuthorizationCover Letter(s)2018-05-02PDF 21.6 KB
Confidentiality Request Letter Long TermCover Letter(s)2018-05-02PDF 21.7 KB
Contact AuthorizationCover Letter(s)2018-05-02PDF 203.8 KB
Description of ChangeCover Letter(s)2018-05-02PDF 17.2 KB
Cover Letter - Agent AuthorizationCover Letter(s)2016-11-09PDF 19.6 KB
Cover Letter - Confidentiality Request - Long Term revCover Letter(s)2016-11-09PDF 49.8 KB
Cover Letter - Contact AuthorizationCover Letter(s)2016-11-09PDF 203.8 KB
RF Exposure Info MPERF Exposure Info2018-05-02PDF 249 KB
RF Exposure Information (MPE)RF Exposure Info2016-11-09PDF 240.3 KB
Block Diagram Metadata onlyBlock DiagramPDF 50.9 KB
Schematics Metadata onlySchematicsPDF 218.3 KB
Operational Description Metadata onlyOperational DescriptionPDF 32.8 KB
Software Operational Description rev Metadata onlyOperational DescriptionPDF 114.3 KB
Operational Decription Software Metadata onlySDR Software/Security InfPDF 107.1 KB

Application Information

Application IDgUApaanAPGwd2ZGQDllbZg==
Final Action Date2018-05-02
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0007371172
ModelAP2610A1
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWireless AC1300 Concurrent Dual Band PoE Access Point
Responsible PartyBrett Adair, General Counsel, brett.adair@dlink.com , 714-885-6282
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, richard.chen@bureauveritas.com , +886-3-2600884
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsPower listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 22 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.

Applications

Application IDDatePurpose
gUApaanAPGwd2ZGQDllbZg==2018-05-02Class II permissive change or modification of presently authorized equipment
Yo5m3dkGNOg1RbUU331XIg==2016-11-09Original Equipment
2ioDm3ya5fSKuW/SY8xBpw==2016-11-09Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.862000015CCC, MO
5180-5240 MHz0.42715E38, CC, MO
5260-5320 MHz0.2115E38, CC, MO
5500-5700 MHz0.19915E38, CC, MO
5745-5825 MHz0.45915E38, CC, MO

Grants

TCB Grant - Application Yo5m3dkGNOg1RbUU331XIg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 11/09/2016

Application Dated: 11/09/2016
D-Link Corporation
14420 Myford Road
Suite 100
Irvine, CA 92606
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2AP2610A1
Name of Grantee:  D-Link Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless AC1300 Concurrent Dual Band PoE Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.427  
38 CC MO 15E 5745.0  -  5825.0 0.459  

Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 22 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Yo5m3dkGNOg1RbUU331XIg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

D-Link Corporation
14420 Myford Road Suite 100
Irvine, CA 92606
United States
  Date of Grant: 11/09/2016

Application Dated: 11/09/2016
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2AP2610A1
Name of Grantee:  D-Link Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless AC1300 Concurrent Dual Band PoE Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.427  
38 CC MO 15E 5745.0  -  5825.0 0.459  

Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 22 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application gUApaanAPGwd2ZGQDllbZg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 05/02/2018

Application Dated: 12/14/2017
D-Link Corporation
14420 Myford Road
Suite 100
Irvine, CA 92606
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2AP2610A1
Name of Grantee:  D-Link Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless AC1300 Concurrent Dual Band PoE Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.427  
38 CC MO 15E 5745.0  -  5825.0 0.459  
38 CC MO 15E 5260.0  -  5320.0 0.21  
38 CC MO 15E 5500.0  -  5700.0 0.199  

Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 22 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application gUApaanAPGwd2ZGQDllbZg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

D-Link Corporation
14420 Myford Road Suite 100
Irvine, CA 92606
United States
  Date of Grant: 05/02/2018

Application Dated: 12/14/2017
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2AP2610A1
Name of Grantee:  D-Link Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless AC1300 Concurrent Dual Band PoE Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.427  
38 CC MO 15E 5745.0  -  5825.0 0.459  
38 CC MO 15E 5260.0  -  5320.0 0.21  
38 CC MO 15E 5500.0  -  5700.0 0.199  

Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 22 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 2ioDm3ya5fSKuW/SY8xBpw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 11/09/2016

Application Dated: 11/09/2016
D-Link Corporation
14420 Myford Road
Suite 100
Irvine, CA 92606
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2AP2610A1
Name of Grantee:  D-Link Corporation
Equipment Class: Digital Transmission System
Notes: Wireless AC1300 Concurrent Dual Band PoE Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.862  

Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 22 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. This device has 20 MHz and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 2ioDm3ya5fSKuW/SY8xBpw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

D-Link Corporation
14420 Myford Road Suite 100
Irvine, CA 92606
United States
  Date of Grant: 11/09/2016

Application Dated: 11/09/2016
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2AP2610A1
Name of Grantee:  D-Link Corporation
Equipment Class: Digital Transmission System
Notes: Wireless AC1300 Concurrent Dual Band PoE Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.862  

Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 22 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. This device has 20 MHz and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: