FCC ID KA2AP2660A1

Wireless AC1200 Concurrent Dual Band PoE Access Point

by D-Link Corporation

Grantee Code: KA2   Product Code: AP2660A1
Latest application date: 2016-06-02

FCC ID Device Details

FCC IDKA2AP2660A1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeKA2
Product CodeAP2660A1
Applicant BusinessD-Link Corporation 🇺🇸
Related Domains dlink.com
Equipment ClassWireless AC1200 Concurrent Dual Band PoE Access Point
Test FirmSPORTON International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2016-06-02
5180-5240 MHzOriginal Equipment2014-04-25
2412-2462 MHzOriginal Equipment2014-04-25

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2014-04-25PDF 1 MB
Internal PhotosInternal Photos2014-04-25PDF 1 MB
External PhotosExternal Photos2014-04-25PDF 570.5 KB
FCC ID Label and LocationID Label/Location Info2014-04-25PDF 533.7 KB
Test Setup PhotosTest Setup Photos2016-06-02PDF 108.2 KB
Test Setup PhotosTest Setup Photos2014-04-25PDF 345.7 KB
MPE Test ReportRF Exposure Info2016-06-02PDF 354.9 KB
Test ReportTest Report2016-06-02PDF 1 MB
Co-Location ReportTest Report2014-04-25PDF 110.6 KB
Test Report for DTSTest Report2014-04-25PDF 2.1 MB
Test Report for NIITest Report2014-04-25PDF 1.3 MB
Attestation LetterCover Letter(s)2016-06-02PDF 29.4 KB
Class II Permissive Change LetterCover Letter(s)2016-06-02PDF 42.7 KB
Confidentiality Request LetterCover Letter(s)2016-06-02PDF 40.9 KB
POACover Letter(s)2016-06-02PDF 36.8 KB
POA Grantee Contact PersonCover Letter(s)2016-06-02PDF 207 KB
Confidentiality Request LetterCover Letter(s)2014-04-25PDF 45 KB
POACover Letter(s)2014-04-25PDF 40 KB
POA_D-LinkCover Letter(s)2014-04-25PDF 186.2 KB
MPE ReportRF Exposure Info2014-04-25PDF 102.1 KB
Block Diagram Metadata onlyBlock DiagramPDF 117.7 KB
Schematics Metadata onlySchematicsPDF 647.1 KB
Operational Description Metadata onlyOperational DescriptionPDF 140.4 KB
Operational Description Software Security Metadata onlySDR Software/Security InfPDF 34.4 KB

Application Information

Application IDUq7Yc8MGyVMUfm/PH6LoaQ==
Final Action Date2016-06-02
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0007371172
ModelAP2660A1
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWireless AC1200 Concurrent Dual Band PoE Access Point
Responsible PartyBrett Adair, General Counsel, brett.adair@dlink.com , 714-885-6282
Test FirmSharon Jiang, SPORTON International Inc., sharonjiang@sporton.com.tw , 886-3-656-9065
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is the maximum combined conducted output power as indicated in the filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. This device supports 802.11n, 20MHz, 40MHz and 802.11ac 80MHz mode. (Date of Grant: 04/25/2014) Class II Permissive Change: This Class II Permissive Change is to update the U-NII bands to the new rules.

Applications

Application IDDatePurpose
Uq7Yc8MGyVMUfm/PH6LoaQ==2016-06-02Class II permissive change or modification of presently authorized equipment
tR3dazeuc/ibHtRt3XjXTQ==2014-04-25Original Equipment
pkZOHNH3iQUaxeIZoUkAIQ==2014-04-25Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.665315CCC, MO
2422-2452 MHz0.128515CCC, MO
5180-5240 MHz0.049515ECC, MO
5180-5240 MHz0.57315E49, CC, MO
5190-5230 MHz0.0515ECC, MO
5210 MHz0.045815ECC, MO
5745-5825 MHz0.701515E49, CC, MO
5745-5825 MHz0.701515CCC, MO
5755-5795 MHz0.628115CCC, MO
5775 MHz0.662215CCC, MO

Grants

TCB Grant - Application Uq7Yc8MGyVMUfm/PH6LoaQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 06/02/2016

Application Dated: 06/02/2016
D-Link Corporation
14420 Myford Road
Suite 100
Irvine, CA 92606
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2AP2660A1
Name of Grantee:  D-Link Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless AC1200 Concurrent Dual Band PoE Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
49 CC MO 15E 5180.0  -  5240.0 0.573  
49 CC MO 15E 5745.0  -  5825.0 0.7015  

Output Power listed is the maximum combined conducted output power as indicated in the filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. This device supports 802.11n, 20MHz, 40MHz and 802.11ac 80MHz mode. (Date of Grant: 04/25/2014) Class II Permissive Change: This Class II Permissive Change is to update the U-NII bands to the new rules.

49: The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Uq7Yc8MGyVMUfm/PH6LoaQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

D-Link Corporation
14420 Myford Road Suite 100
Irvine, CA 92606
United States
  Date of Grant: 06/02/2016

Application Dated: 06/02/2016
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2AP2660A1
Name of Grantee:  D-Link Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless AC1200 Concurrent Dual Band PoE Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
49 CC MO 15E 5180.0  -  5240.0 0.573  
49 CC MO 15E 5745.0  -  5825.0 0.7015  

Output Power listed is the maximum combined conducted output power as indicated in the filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. This device supports 802.11n, 20MHz, 40MHz and 802.11ac 80MHz mode. (Date of Grant: 04/25/2014) Class II Permissive Change: This Class II Permissive Change is to update the U-NII bands to the new rules.


49: The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application tR3dazeuc/ibHtRt3XjXTQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 04/25/2014

Application Dated: 04/25/2014
D-Link Corporation
14420 Myford Road
Suite 100
Irvine, CA 92606
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2AP2660A1
Name of Grantee:  D-Link Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless AC1200 Concurrent Dual Band PoE Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0495  
CC MO 15E 5190.0  -  5230.0 0.05  
CC MO 15E 5210.0  -  5210.0 0.0458  

Output Power listed is the maximum combined conducted output power as indicated in the filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. This device supports 802.11n, 20MHz, 40MHz and 802.11ac 80MHz mode.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application tR3dazeuc/ibHtRt3XjXTQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

D-Link Corporation
14420 Myford Road Suite 100
Irvine, CA 92606
United States
  Date of Grant: 04/25/2014

Application Dated: 04/25/2014
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2AP2660A1
Name of Grantee:  D-Link Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless AC1200 Concurrent Dual Band PoE Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0495  
CC MO 15E 5190.0  -  5230.0 0.05  
CC MO 15E 5210.0  -  5210.0 0.0458  

Output Power listed is the maximum combined conducted output power as indicated in the filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. This device supports 802.11n, 20MHz, 40MHz and 802.11ac 80MHz mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application pkZOHNH3iQUaxeIZoUkAIQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 04/25/2014

Application Dated: 04/25/2014
D-Link Corporation
14420 Myford Road
Suite 100
Irvine, CA 92606
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2AP2660A1
Name of Grantee:  D-Link Corporation
Equipment Class: Digital Transmission System
Notes: Wireless AC1200 Concurrent Dual Band PoE Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.6653  
CC MO 15C 2422.0  -  2452.0 0.1285  
CC MO 15C 5745.0  -  5825.0 0.7015  
CC MO 15C 5755.0  -  5795.0 0.6281  
CC MO 15C 5775.0  -  5775.0 0.6622  

Output Power listed is the maximum combined conducted output power as indicated in the filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. This device supports 802.11n, 20MHz, 40MHz and 802.11ac 80MHz mode.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application pkZOHNH3iQUaxeIZoUkAIQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

D-Link Corporation
14420 Myford Road Suite 100
Irvine, CA 92606
United States
  Date of Grant: 04/25/2014

Application Dated: 04/25/2014
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2AP2660A1
Name of Grantee:  D-Link Corporation
Equipment Class: Digital Transmission System
Notes: Wireless AC1200 Concurrent Dual Band PoE Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.6653  
CC MO 15C 2422.0  -  2452.0 0.1285  
CC MO 15C 5745.0  -  5825.0 0.7015  
CC MO 15C 5755.0  -  5795.0 0.6281  
CC MO 15C 5775.0  -  5775.0 0.6622  

Output Power listed is the maximum combined conducted output power as indicated in the filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. This device supports 802.11n, 20MHz, 40MHz and 802.11ac 80MHz mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: