FCC ID KA2DIR2150A1

AC2100 Mesh Wi-Fi Gigabit Router - AC2100 Wi-Fi Gigabit Router

by D-Link Corporation

Grantee Code: KA2   Product Code: DIR2150A1
Latest application date: 2020-07-09

FCC ID Device Details

FCC IDKA2DIR2150A1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeKA2
Product CodeDIR2150A1
Applicant BusinessD-Link Corporation 🇺🇸
Related Domains dlink.com
Equipment ClassAC2100 Mesh Wi-Fi Gigabit Router - AC2100 Wi-Fi Gigabit Router
Test FirmBTL INC.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2020-07-09
5150-5250 MHzOriginal Equipment2020-07-09

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2020-07-09PDF 4 MB
Internal PhotosInternal Photos2020-07-09PDF 1 MB
External PhotosExternal Photos2020-07-09PDF 549.3 KB
Label InfoID Label/Location Info2020-07-09PDF 156.1 KB
Test Setup PhotosTest Setup Photos2020-07-09PDF 580.1 KB
Test Report 2.4G WLANTest Report2020-07-09PDF 4.9 MB
Test Report 5G WLAN 1Test Report2020-07-09PDF 3.1 MB
Test Report 5G WLAN 2Test Report2020-07-09PDF 4.8 MB
SDoC Attestation LetterAttestation Statements2020-07-09PDF 752.6 KB
Ad Hoc Mode Declaration LetterCover Letter(s)2020-07-09PDF 21.2 KB
Confidentiality LetterCover Letter(s)2020-07-09PDF 20.9 KB
POACover Letter(s)2020-07-09PDF 18.6 KB
POACover Letter(s)2020-07-09PDF 210.7 KB
POA D-LinkCover Letter(s)2020-07-09PDF 210.7 KB
Product Declaration LetterCover Letter(s)2020-07-09PDF 26.3 KB
RF ExposureRF Exposure Info2020-07-09PDF 168.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 84.1 KB
Schematics Metadata onlySchematicsPDF 703.3 KB
Operational Description Metadata onlyOperational DescriptionPDF 50.3 KB
Software Security Info Metadata onlyOperational DescriptionPDF 127.1 KB

Application Information

Application IDoBdM+vhvGEKUhkUPxWPXoA==
Final Action Date2020-07-09
Application PurposeOriginal Equipment
Applicant FRN0007371172
ModelDIR2150A1
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionAC2100 Mesh Wi-Fi Gigabit Router - AC2100 Wi-Fi Gigabit Router
Responsible PartyBrett Adair, General Counsel, brett.adair@dlink.com , 714-885-6282
Test FirmSophia Huang, BTL INC., Sophia.huang@newbtl.com , +86-769-83183000
TCB Emailtei@timcoengr.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 26cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, and 40 MHz bandwidth modes.

Applications

Application IDDatePurpose
oBdM+vhvGEKUhkUPxWPXoA==2020-07-09Original Equipment
eRWUyeGB6akndnO2QFk3bw==2020-07-09Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.626600015CCC, MO
5150-5250 MHz0.300615ECC, MO
5725-5850 MHz0.712915ECC, MO

Grants

TCB Grant - Application oBdM+vhvGEKUhkUPxWPXoA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 07/09/2020

Application Dated: 07/09/2020
D-Link Corporation
14420 Myford Road
Suite 100
Irvine, CA 92606
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2DIR2150A1
Name of Grantee:  D-Link Corporation
Equipment Class: Digital Transmission System
Notes: AC2100 Mesh Wi-Fi Gigabit Router - AC2100 Wi-Fi Gigabit Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.6266  

Power listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 26cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application oBdM+vhvGEKUhkUPxWPXoA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

D-Link Corporation
14420 Myford Road Suite 100
Irvine, CA 92606
United States
  Date of Grant: 07/09/2020

Application Dated: 07/09/2020
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2DIR2150A1
Name of Grantee:  D-Link Corporation
Equipment Class: Digital Transmission System
Notes: AC2100 Mesh Wi-Fi Gigabit Router - AC2100 Wi-Fi Gigabit Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.6266  

Power listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 26cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application eRWUyeGB6akndnO2QFk3bw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 07/09/2020

Application Dated: 07/09/2020
D-Link Corporation
14420 Myford Road
Suite 100
Irvine, CA 92606
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2DIR2150A1
Name of Grantee:  D-Link Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AC2100 Mesh Wi-Fi Gigabit Router - AC2100 Wi-Fi Gigabit Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5150.0  -  5250.0 0.3006  
CC MO 15E 5725.0  -  5850.0 0.7129  

Power listed is maximum power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 26cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application eRWUyeGB6akndnO2QFk3bw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

D-Link Corporation
14420 Myford Road Suite 100
Irvine, CA 92606
United States
  Date of Grant: 07/09/2020

Application Dated: 07/09/2020
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2DIR2150A1
Name of Grantee:  D-Link Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AC2100 Mesh Wi-Fi Gigabit Router - AC2100 Wi-Fi Gigabit Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5150.0  -  5250.0 0.3006  
CC MO 15E 5725.0  -  5850.0 0.7129  

Power listed is maximum power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 26cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: