FCC ID KA2DWAX3000A1

Intel WiFi 6 AX200

by D-Link Corporation

Grantee Code: KA2   Product Code: DWAX3000A1
Latest application date: 2020-04-15

FCC ID Device Details

FCC IDKA2DWAX3000A1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeKA2
Product CodeDWAX3000A1
Applicant BusinessD-Link Corporation 🇺🇸
Related Domains dlink.com dekra.com
Equipment ClassIntel WiFi 6 AX200
Test FirmDEKRA TESTING AND CERTIFICATION CO., LTD. LinKou

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: PD9AX200NG Grant Date: 03/05/20192020-04-15
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: PD9AX200NG Grant Date: 03/05/20192020-04-15
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: PD9AX200NG Grant Date: 03/05/20192020-04-15

Exhibits

DocumentTypeAvailableFile
External PhotosExternal Photos2020-04-15PDF 507.7 KB
ID LabelID Label/Location Info2020-04-15PDF 179.3 KB
Label LocationID Label/Location Info2020-04-15PDF 150.5 KB
Auth Multiple ListingCover Letter(s)2020-04-15PDF 45.8 KB
Declaration letter for electrically identicalCover Letter(s)2020-04-15PDF 24.6 KB
Power of Attorney for FCCCover Letter(s)2020-04-15PDF 45 KB

Application Information

Application IDfUG9R1yBIDvGBH5gGqYxwg==
Final Action Date2020-04-15
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: PD9AX200NG Grant Date: 03/05/2019
Applicant FRN0007371172
ModelDWAX3000A1
Equipment ClassJBP - Part 15 Class B Computing Device Peripheral
Device DescriptionIntel WiFi 6 AX200
Responsible PartyBrett Adair, General Counsel, brett.adair@dlink.com , 714-885-6282
AgentVincent Vincent Vincent, DEKRA Testing and Certification Co., Ltd., vincent.lin@dekra.com , 886-2-8601-3788
Technical ContactFrank Yen, DEKRA Testing and Certification Co., Ltd., frank.yen@dekra.com , 886-2-8601-3788
Non-Technical ContactFrank Yen, DEKRA Testing and Certification Co., Ltd., frank.yen@dekra.com , 886-2-8601-3788
Test FirmMirenda Liao, DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou, mirenda.liao@dekra.com , +886-2-2602-7968
TCB Emailcertification@telefication.com
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
fUG9R1yBIDvGBH5gGqYxwg==2020-04-15Change in identification of presently authorized equipment. Original FCC ID: PD9AX200NG Grant Date: 03/05/2019
Epouvix9sZaoQqxG+mVpNQ==2020-04-15Change in identification of presently authorized equipment. Original FCC ID: PD9AX200NG Grant Date: 03/05/2019
E7Z9fe2dJNgZIegbbtfTXA==2020-04-15Change in identification of presently authorized equipment. Original FCC ID: PD9AX200NG Grant Date: 03/05/2019
9LcXdqfXUmQNSq2HJtF4Hg==2020-04-15Change in identification of presently authorized equipment. Original FCC ID: PD9AX200NG Grant Date: 03/05/2019

Equipment Authorization

FrequencyOutputRulesGrant Notes
15BCC
2402-2480 MHz0.012000015CCC
2402-2480 MHz0.00815CCC
2412-2472 MHz0.98815CCC, MO
2422-2462 MHz0.77715CCC, MO
5190-5230 MHz0.16615ECC, MO
5210 MHz0.10515ECC, MO
5250 MHz0.09615ECC, MO
5260-5320 MHz0.18415ECC, MO, ND
5270-5310 MHz0.15215ECC, MO, ND
5290 MHz0.08915ECC, MO, ND
5500-5700 MHz0.215ECC, MO, ND
5530-5690 MHz0.19915ECC, MO, ND
5710 MHz0.18415ECC, MO, ND
5720 MHz0.15615ECC, MO, ND
5745-5825 MHz0.20615ECC, MO
5755-5795 MHz0.20215ECC, MO
5775 MHz0.16315ECC, MO

Grants

TCB Grant - Application fUG9R1yBIDvGBH5gGqYxwg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 04/15/2020

Application Dated: 04/14/2020
D-Link Corporation
14420 Myford Road
Suite 100
Irvine, CA 92606
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2DWAX3000A1
Name of Grantee:  D-Link Corporation
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Intel WiFi 6 AX200
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application fUG9R1yBIDvGBH5gGqYxwg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

D-Link Corporation
14420 Myford Road Suite 100
Irvine, CA 92606
United States
  Date of Grant: 04/15/2020

Application Dated: 04/14/2020
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2DWAX3000A1
Name of Grantee:  D-Link Corporation
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Intel WiFi 6 AX200
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Epouvix9sZaoQqxG+mVpNQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 04/15/2020

Application Dated: 04/14/2020
D-Link Corporation
14420 Myford Road
Suite 100
Irvine, CA 92606
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2DWAX3000A1
Name of Grantee:  D-Link Corporation
Equipment Class: Digital Transmission System
Notes: Intel WiFi 6 AX200
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.008  
CC MO 15C 2412.0  -  2472.0 0.988  
CC MO 15C 2422.0  -  2462.0 0.777  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Epouvix9sZaoQqxG+mVpNQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

D-Link Corporation
14420 Myford Road Suite 100
Irvine, CA 92606
United States
  Date of Grant: 04/15/2020

Application Dated: 04/14/2020
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2DWAX3000A1
Name of Grantee:  D-Link Corporation
Equipment Class: Digital Transmission System
Notes: Intel WiFi 6 AX200
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.008  
CC MO 15C 2412.0  -  2472.0 0.988  
CC MO 15C 2422.0  -  2462.0 0.777  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application E7Z9fe2dJNgZIegbbtfTXA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 04/15/2020

Application Dated: 04/14/2020
D-Link Corporation
14420 Myford Road
Suite 100
Irvine, CA 92606
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2DWAX3000A1
Name of Grantee:  D-Link Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel WiFi 6 AX200
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.012  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application E7Z9fe2dJNgZIegbbtfTXA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

D-Link Corporation
14420 Myford Road Suite 100
Irvine, CA 92606
United States
  Date of Grant: 04/15/2020

Application Dated: 04/14/2020
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2DWAX3000A1
Name of Grantee:  D-Link Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Intel WiFi 6 AX200
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.012  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 9LcXdqfXUmQNSq2HJtF4Hg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 04/15/2020

Application Dated: 04/14/2020
D-Link Corporation
14420 Myford Road
Suite 100
Irvine, CA 92606
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2DWAX3000A1
Name of Grantee:  D-Link Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel WiFi 6 AX200
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.189  
CC MO 15E 5190.0  -  5230.0 0.166  
CC MO 15E 5210.0  -  5210.0 0.105  
CC MO 15E 5250.0  -  5250.0 0.096  
CC MO ND 15E 5260.0  -  5320.0 0.184  
CC MO ND 15E 5270.0  -  5310.0 0.152  
CC MO ND 15E 5290.0  -  5290.0 0.089  
CC MO ND 15E 5500.0  -  5700.0 0.2  
CC MO ND 15E 5710.0  -  5710.0 0.184  
CC MO ND 15E 5720.0  -  5720.0 0.156  
CC MO ND 15E 5530.0  -  5690.0 0.199  
CC MO 15E 5745.0  -  5825.0 0.206  
CC MO 15E 5755.0  -  5795.0 0.202  
CC MO 15E 5775.0  -  5775.0 0.163  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application 9LcXdqfXUmQNSq2HJtF4Hg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

D-Link Corporation
14420 Myford Road Suite 100
Irvine, CA 92606
United States
  Date of Grant: 04/15/2020

Application Dated: 04/14/2020
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2DWAX3000A1
Name of Grantee:  D-Link Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel WiFi 6 AX200
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.189  
CC MO 15E 5190.0  -  5230.0 0.166  
CC MO 15E 5210.0  -  5210.0 0.105  
CC MO 15E 5250.0  -  5250.0 0.096  
CC MO ND 15E 5260.0  -  5320.0 0.184  
CC MO ND 15E 5270.0  -  5310.0 0.152  
CC MO ND 15E 5290.0  -  5290.0 0.089  
CC MO ND 15E 5500.0  -  5700.0 0.2  
CC MO ND 15E 5710.0  -  5710.0 0.184  
CC MO ND 15E 5720.0  -  5720.0 0.156  
CC MO ND 15E 5530.0  -  5690.0 0.199  
CC MO 15E 5745.0  -  5825.0 0.206  
CC MO 15E 5755.0  -  5795.0 0.202  
CC MO 15E 5775.0  -  5775.0 0.163  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: