FCC ID KA2DWL2700APB1
IEEE802.11g Outdoor Access Point
by D-Link Corporation
Grantee Code: KA2 Product Code: DWL2700APB1
Latest application date: 2008-10-29
FCC ID Device Details
| FCC ID | KA2DWL2700APB1 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | KA2 |
| Product Code | DWL2700APB1 |
| Applicant Business | D-Link Corporation 🇺🇸 |
| Related Domains |  dlink.com  adt.com.tw |
| Equipment Class | IEEE802.11g Outdoor Access Point |
| Test Firm | Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2008-10-29 |
| 2412-2462 MHz | Original Equipment | 2006-08-14 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual 1 | Users Manual | 2006-08-14 | PDF 2.7 MB |
| Manual 2 | Users Manual | 2006-08-14 | PDF 2.9 MB |
| Manual 3 | Users Manual | 2006-08-14 | PDF 1.1 MB |
| Internal Photos | Internal Photos | 2008-10-29 | PDF 2.5 MB |
| Internal Photos | Internal Photos | 2006-08-14 | PDF 979.7 KB |
| External Photos | External Photos | 2008-10-29 | PDF 189.8 KB |
| External Photos | External Photos | 2006-08-14 | PDF 193 KB |
| Label | ID Label/Location Info | 2006-08-14 | PDF 57 KB |
| Label Location | ID Label/Location Info | 2006-08-14 | PDF 90.5 KB |
| Operational Description | Operational Description | 2008-10-29 | PDF 15.1 KB |
| Operational Description | Operational Description | 2006-08-14 | PDF 62.9 KB |
| Test Setup Photos | Test Setup Photos | 2008-10-29 | PDF 371.9 KB |
| Test Setup Photos | Test Setup Photos | 2006-08-14 | PDF 179.9 KB |
| Test Report | Test Report | 2008-10-29 | PDF 2.8 MB |
| Test Report | Test Report | 2006-08-14 | PDF 1.8 MB |
| Cover Letter Agency | Cover Letter(s) | 2008-10-29 | PDF 90.2 KB |
| Cover Letter Description of Change | Cover Letter(s) | 2008-10-29 | PDF 18.9 KB |
| Agency | Cover Letter(s) | 2006-08-14 | PDF 15.5 KB |
| Confidentiality Request | Cover Letter(s) | 2006-08-14 | PDF 15.5 KB |
| Professional Installation | Cover Letter(s) | 2006-08-14 | PDF 18.7 KB |
| RF Exposure Info | RF Exposure Info | 2008-10-29 | PDF 47.1 KB |
| RF Exposure Info | RF Exposure Info | 2006-08-14 | PDF 87.7 KB |
| Block Diagram Metadata only | Block Diagram | PDF 110.7 KB | |
| Schematics Metadata only | Schematics | PDF 2 MB |
Application Information
| Application ID | QfggQrIO/SbfsbrnGRb+zw== |
|---|---|
| Final Action Date | 2008-10-29 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0006207146 |
| Model | DWL2700APB1 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | IEEE802.11g Outdoor Access Point |
| Responsible Party | Michael Boschma, Engineer, MBoschma@dlink.com , 714-885-6105 |
| Technical Contact | Eric Lin, Bureau Vereritas CPS (H.K.) Ltd. Taoyuan Branch -, eric_lin@adt.com.tw , 886-3-593-5343 |
| Non-Technical Contact | Eric Lin, Bureau Vereritas CPS (H.K.) Ltd. Taoyuan Branch -, eric_lin@adt.com.tw , 886-3-593-5343 |
| Test Firm | Richard Chen, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, richard.chen@tw.bureauveritas.com  , 886-2-2605-2180-3 |
| TCB Email | certification@curtis-straus.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is conducted. This device must be professionally installed. Marketing to the General Public is prohibited. Only the antenna(s) tested in this filing may be used with the transmitter. The use of an antenna other than shown in the filing requires a PC2. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End -users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II permissive change for adding antennas. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| QfggQrIO/SbfsbrnGRb+zw== | 2008-10-29 | Class II permissive change or modification of presently authorized equipment |
| s4vk2F7yHGsFDwWEixc7hA== | 2006-08-14 | Original Equipment |
Grants
TCB Grant - Application s4vk2F7yHGsFDwWEixc7hA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 08/14/2006 Application Dated: 08/14/2006 |
| D-Link Corporation |
| 14420 Myford Road |
| Suite 100 |
| Irvine, CA 92606 |
| Attention: Brett Adair , General Counsel |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2DWL2700APB1 |
| Name of Grantee: | D-Link Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE802.11g Outdoor Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 28 | 15C | 2412.0 - 2462.0 | 0.355 |
| Power Output listed is conducted. This device must be professionally installed. Marketing to the General Public is prohibited. Only the antenna(s) tested in this filing may be used with the transmitter. The use of an antenna other than shown in the filing requires a PC2. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End -users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 28: | An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold. |
EAS Grant - Application s4vk2F7yHGsFDwWEixc7hA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
D-Link Corporation 14420 Myford Road Suite 100 Irvine, CA 92606 United States |
Date of Grant: 08/14/2006 Application Dated: 08/14/2006 |
| Attention: Brett Adair , General Counsel |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2DWL2700APB1 |
| Name of Grantee: | D-Link Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE802.11g Outdoor Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 28 | 15C | 2412.0 - 2462.0 | 0.355 |
| Power Output listed is conducted. This device must be professionally installed. Marketing to the General Public is prohibited. Only the antenna(s) tested in this filing may be used with the transmitter. The use of an antenna other than shown in the filing requires a PC2. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End -users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 28: | An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 10/29/2008 Application Dated: 10/29/2008 |
| D Link Corporation |
| 17595 Mt. Herrmann |
| Fountain Valley, CA 92708 |
| Attention: Michael Boschma , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2DWL2700APB1 |
| Name of Grantee: | D Link Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE802.11g Outdoor Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 28 | 15C | 2412.0 - 2462.0 | 0.355 |
| Power Output listed is conducted. This device must be professionally installed. Marketing to the General Public is prohibited. Only the antenna(s) tested in this filing may be used with the transmitter. The use of an antenna other than shown in the filing requires a PC2. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End -users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II permissive change for adding antennas. |
| 28: | An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold. |
EAS Grant - Application QfggQrIO/SbfsbrnGRb+zw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
D Link Corporation 17595 Mt. Herrmann Fountain Valley, CA 92708 United States |
Date of Grant: 10/29/2008 Application Dated: 10/29/2008 |
| Attention: Michael Boschma , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2DWL2700APB1 |
| Name of Grantee: | D Link Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE802.11g Outdoor Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 28 | 15C | 2412.0 - 2462.0 | 0.355 |
| Power Output listed is conducted. This device must be professionally installed. Marketing to the General Public is prohibited. Only the antenna(s) tested in this filing may be used with the transmitter. The use of an antenna other than shown in the filing requires a PC2. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End -users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II permissive change for adding antennas. |
| 28: | An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold. |
| Mail To: |