FCC ID KA2DWL8200APA1
802.11a/g Dual Band Access Point
by D-Link Corporation
Grantee Code: KA2 Product Code: DWL8200APA1
Latest application date: 2008-04-22
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5220 MHz | Class II permissive change or modification of presently authorized equipment | 2008-04-22 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2008-04-22 |
| 5180-5220 MHz | Class II permissive change or modification of presently authorized equipment | 2007-06-11 |
| 2412-2462 MHz | Original Equipment | 2005-06-27 |
| 5180-5320 MHz | Original Equipment | 2005-06-27 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual 1 of 3 | Users Manual | 2005-06-27 | PDF 3 MB |
| Users Manual 2 of 3 | Users Manual | 2005-06-27 | PDF 2.3 MB |
| Users Manual 3 of 3 | Users Manual | 2005-06-27 | PDF 1.9 MB |
| Internal Photos | Internal Photos | 2005-06-27 | PDF 963.8 KB |
| External Photos | External Photos | 2005-06-27 | PDF 648.3 KB |
| ID Label Location Info | ID Label/Location Info | 2005-06-27 | PDF 784.4 KB |
| Test Setup Photos | Test Setup Photos | 2005-06-27 | PDF 399.3 KB |
| Test Setup Photos | Test Setup Photos | 2005-06-27 | PDF 400.6 KB |
| Test report | Test Report | 2008-04-22 | PDF 248.4 KB |
| Test report | Test Report | 2008-04-22 | PDF 227.2 KB |
| Test Report | Test Report | 2005-06-27 | PDF 2.2 MB |
| Test Report | Test Report | 2005-06-27 | PDF 2.6 MB |
| Agent authorization letter | Cover Letter(s) | 2008-04-22 | PDF 53.9 KB |
| Authorization letter | Cover Letter(s) | 2008-04-22 | PDF 53.9 KB |
| Authorization letter by DLINK | Cover Letter(s) | 2008-04-22 | PDF 1.3 MB |
| Authorization letter from Dlink | Cover Letter(s) | 2008-04-22 | PDF 1.3 MB |
| Class II permissive change request letter | Cover Letter(s) | 2008-04-22 | PDF 264 KB |
| Confidentiality request letter | Cover Letter(s) | 2008-04-22 | PDF 22.1 KB |
| Agent authorization letter | Cover Letter(s) | 2007-06-11 | PDF 343.9 KB |
| Class II permissive change cover letter | Cover Letter(s) | 2007-06-11 | PDF 143.6 KB |
| Agent Authorization Letter Metadata only | Cover Letter(s) | 2005-06-27 | PDF 29 KB |
| Authorization Letter | Cover Letter(s) | 2005-06-27 | PDF 29 KB |
| Confidentiality Letter | Cover Letter(s) | 2005-06-27 | PDF 25.1 KB |
| Request for Confidentiality Letter Metadata only | Cover Letter(s) | 2005-06-27 | PDF 25.1 KB |
| Request for Confidentialtiy Letter Metadata only | Cover Letter(s) | 2005-06-27 | PDF 25.1 KB |
| TCB Q and A | Cover Letter(s) | 2005-06-27 | PDF 14.2 KB |
| TCB Q and A | Cover Letter(s) | 2005-06-27 | PDF 15.9 KB |
| Antenna Specification 1 | Parts List/Tune Up Info | 2005-06-27 | PDF 1.5 MB |
| Antenna Specification 2 | Parts List/Tune Up Info | 2005-06-27 | PDF 2.9 MB |
| RF Exposure Info | RF Exposure Info | 2005-06-27 | PDF 158.7 KB |
| Block Diagram Metadata only | Block Diagram | PDF 12.6 KB | |
| Schematics Metadata only | Schematics | PDF 370.4 KB | |
| Operational Description Metadata only | Operational Description | PDF 183.9 KB |
Application Information
| Application ID | njrcTYKsnhhxipgl0ihLNw== |
|---|---|
| Final Action Date | 2008-04-22 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0006207146 |
| Model | DWL8200APA1 |
| Frequency Range | 5180-5220 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | 802.11a/g Dual Band Access Point |
| Responsible Party | Michael Boschma, Engineer, MBoschma@dlink.com |
| Test Firm | Kurt Chen, Compliance Certification Services Inc., kurt.chen@ccsrf.com |
| TCB Email | mike.kuo@ccsemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change. Output power listed is conducted. This device must be marketed for indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| njrcTYKsnhhxipgl0ihLNw== | 2008-04-22 | Class II permissive change or modification of presently authorized equipment |
| IHRUMjQOIBU8TKkJGx6H9Q== | 2008-04-22 | Class II permissive change or modification of presently authorized equipment |
| 8fnqGYbAI/NXPhgEJJUj1w== | 2007-06-11 | Class II permissive change or modification of presently authorized equipment |
| eR+vpQPk74oOIrUZPWQa6w== | 2005-06-27 | Original Equipment |
| e7FLTsgC1mtvCb8nyXuoCw== | 2005-06-27 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application njrcTYKsnhhxipgl0ihLNw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 04/22/2008 Application Dated: 04/22/2008 |
| D Link Corporation |
| 17595 Mt. Herrmann |
| Fountain Valley, CA 92708 |
| Attention: Michael Boschma , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2DWL8200APA1 |
| Name of Grantee: | D Link Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/g Dual Band Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 28 CC | 15E | 5180.0 - 5220.0 | 0.02317 |
| Class II Permissive Change. Output power listed is conducted. This device must be marketed for indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| 28: | An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application njrcTYKsnhhxipgl0ihLNw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
D Link Corporation 17595 Mt. Herrmann Fountain Valley, CA 92708 United States |
Date of Grant: 04/22/2008 Application Dated: 04/22/2008 |
| Attention: Michael Boschma , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2DWL8200APA1 |
| Name of Grantee: | D Link Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/g Dual Band Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 28 CC | 15E | 5180.0 - 5220.0 | 0.02317 |
| Class II Permissive Change. Output power listed is conducted. This device must be marketed for indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| 28: | An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 04/22/2008 Application Dated: 04/22/2008 |
| D Link Corporation |
| 17595 Mt. Herrmann |
| Fountain Valley, CA 92708 |
| Attention: Michael Boschma , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2DWL8200APA1 |
| Name of Grantee: | D Link Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/g Dual Band Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 28 CC | 15C | 2412.0 - 2462.0 | 0.173 | ||
| 28 CC | 15C | 5745.0 - 5825.0 | 0.152 |
| Class II permissive change. Ouput power listed is conducted. This device must be marketed for indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co -located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| 28: | An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application IHRUMjQOIBU8TKkJGx6H9Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
D Link Corporation 17595 Mt. Herrmann Fountain Valley, CA 92708 United States |
Date of Grant: 04/22/2008 Application Dated: 04/22/2008 |
| Attention: Michael Boschma , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2DWL8200APA1 |
| Name of Grantee: | D Link Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/g Dual Band Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 28 CC | 15C | 2412.0 - 2462.0 | 0.173 | ||
| 28 CC | 15C | 5745.0 - 5825.0 | 0.152 |
| Class II permissive change. Ouput power listed is conducted. This device must be marketed for indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co -located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| 28: | An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/27/2005 Application Dated: 06/27/2005 |
| D-Link Corporation |
| 14420 Myford Road |
| Suite 100 |
| Irvine, CA 92606 |
| Attention: Brett Adair , General Counsel |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2DWL8200APA1 |
| Name of Grantee: | D-Link Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/g Dual Band Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 28 CC | 15C | 2412.0 - 2462.0 | 0.173 | ||
| 28 CC | 15C | 5745.0 - 5825.0 | 0.152 |
| Ouput power listed is conducted. This device must be marketed for indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| 28: | An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application eR+vpQPk74oOIrUZPWQa6w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
D-Link Corporation 14420 Myford Road Suite 100 Irvine, CA 92606 United States |
Date of Grant: 06/27/2005 Application Dated: 06/27/2005 |
| Attention: Brett Adair , General Counsel |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2DWL8200APA1 |
| Name of Grantee: | D-Link Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/g Dual Band Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 28 CC | 15C | 2412.0 - 2462.0 | 0.173 | ||
| 28 CC | 15C | 5745.0 - 5825.0 | 0.152 |
| Ouput power listed is conducted. This device must be marketed for indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| 28: | An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/27/2005 Application Dated: 06/27/2005 |
| D-Link Corporation |
| 14420 Myford Road |
| Suite 100 |
| Irvine, CA 92606 |
| Attention: Brett Adair , General Counsel |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2DWL8200APA1 |
| Name of Grantee: | D-Link Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/g Dual Band Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 28 CC | 15E | 5180.0 - 5320.0 | 0.0332 |
| Ouput power listed is conducted. This device must be marketed for indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| 28: | An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application e7FLTsgC1mtvCb8nyXuoCw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
D-Link Corporation 14420 Myford Road Suite 100 Irvine, CA 92606 United States |
Date of Grant: 06/27/2005 Application Dated: 06/27/2005 |
| Attention: Brett Adair , General Counsel |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2DWL8200APA1 |
| Name of Grantee: | D-Link Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/g Dual Band Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 28 CC | 15E | 5180.0 - 5320.0 | 0.0332 |
| Ouput power listed is conducted. This device must be marketed for indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| 28: | An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 | Date of Grant: 06/11/2007 Application Dated: 06/11/2007 |
| D Link Corporation |
| 17595 Mt. Herrmann |
| Fountain Valley, CA 92708 |
| Attention: Michael Boschma , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2DWL8200APA1 |
| Name of Grantee: | D Link Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/g Dual Band Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 28 CC | 15E | 5180.0 - 5220.0 | 0.02317 |
| Class II Permissive Change to delete operation in 5250-5350 MHz operation. Ouput power listed is conducted. This device must be marketed for indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| 28: | An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 8fnqGYbAI/NXPhgEJJUj1w==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| D Link Corporation 17595 Mt. Herrmann Fountain Valley, CA 92708 United States | Date of Grant: 06/11/2007 Application Dated: 06/11/2007 |
| Attention: Michael Boschma , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2DWL8200APA1 |
| Name of Grantee: | D Link Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/g Dual Band Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 28 CC | 15E | 5180.0 - 5220.0 | 0.02317 |
| Class II Permissive Change to delete operation in 5250-5350 MHz operation. Ouput power listed is conducted. This device must be marketed for indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.
|
| 28: | An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |
| EA532991 |