FCC ID KA2IR815A1

Wireless N Dual Band Router

by D-Link Corporation

Grantee Code: KA2   Product Code: IR815A1
Latest application date: 2010-07-06

FCC ID Device Details

FCC IDKA2IR815A1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeKA2
Product CodeIR815A1
Applicant BusinessD-Link Corporation 🇺🇸
Related Domains dlink.com tw.bureauveritas.com
Equipment ClassWireless N Dual Band Router
Test FirmBureau Veritas CPS (H.K.) Ltd. Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2010-07-06
5180-5240 MHzOriginal Equipment2010-07-06

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2010-07-06PDF 3.5 MB
Internal PhotosInternal Photos2010-07-06PDF 552.6 KB
External PhotosExternal Photos2010-07-06PDF 430.2 KB
LabelID Label/Location Info2010-07-06PDF 225.6 KB
Label LocationID Label/Location Info2010-07-06PDF 75.4 KB
Operational DescriptionOperational Description2010-07-06PDF 33.3 KB
Test Setup PhotosTest Setup Photos2010-07-06PDF 212.2 KB
Test Report - 15CTest Report2010-07-06PDF 1.3 MB
Test Report - 15ETest Report2010-07-06PDF 922.9 KB
Attestation Statement Ad Hoc DeclarationAttestation Statements2010-07-06PDF 40.9 KB
Confidentiality RequestCover Letter(s)2010-07-06PDF 50.8 KB
Cover Letter Agent AuthorizationCover Letter(s)2010-07-06PDF 47.4 KB
Cover Letter Contact AuthorizationCover Letter(s)2010-07-06PDF 185.7 KB
RF Exposure InfoRF Exposure Info2010-07-06PDF 147 KB

Application Information

Application IDLeh87TBhvbo+ZPkXBrId9w==
Final Action Date2010-07-06
Application PurposeOriginal Equipment
Applicant FRN0006207146
ModelIR815A1
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWireless N Dual Band Router
Responsible PartyMichael Boschma, Engineer, MBoschma@dlink.com , 714-885-6105
Technical ContactGary Chang, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, gary.chang@tw.bureauveritas.com , 886-3-3183232
Non-Technical ContactZoe Chang, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, zoe.chang@tw.bureauveritas.com , 886-3-3183232
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, richard.chen@tw.bureauveritas.com , 886-3-3183232
TCB Emailcertification@curtis-straus.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is the maximum combined conducted output power. Device is a draft 802.11abgn router operating in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Applications

Application IDDatePurpose
Leh87TBhvbo+ZPkXBrId9w==2010-07-06Original Equipment
JkLpjnkqylKwex2M+UrjiQ==2010-07-06Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.56415CCC, MO
5180-5240 MHz0.047000015ECC, MO
5745-5825 MHz0.5715CCC, MO

Grants

TCB Grant - Application Leh87TBhvbo+ZPkXBrId9w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 07/06/2010

Application Dated: 07/05/2010
D Link Corporation
17595 Mt. Herrmann
Fountain Valley, CA 92708
 
Attention: Michael Boschma , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2IR815A1
Name of Grantee:  D Link Corporation
Equipment Class: Digital Transmission System
Notes: Wireless N Dual Band Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.564  
CC MO 15C 5745.0  -  5825.0 0.57  

Power listed is the maximum combined conducted output power. Device is a draft 802.11abgn router operating in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Leh87TBhvbo+ZPkXBrId9w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

D Link Corporation
17595 Mt. Herrmann
Fountain Valley, CA 92708
United States
  Date of Grant: 07/06/2010

Application Dated: 07/05/2010
 
Attention: Michael Boschma , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2IR815A1
Name of Grantee:  D Link Corporation
Equipment Class: Digital Transmission System
Notes: Wireless N Dual Band Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.564  
CC MO 15C 5745.0  -  5825.0 0.57  

Power listed is the maximum combined conducted output power. Device is a draft 802.11abgn router operating in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application JkLpjnkqylKwex2M+UrjiQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 07/06/2010

Application Dated: 07/05/2010
D Link Corporation
17595 Mt. Herrmann
Fountain Valley, CA 92708
 
Attention: Michael Boschma , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2IR815A1
Name of Grantee:  D Link Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless N Dual Band Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.047  

Power listed is the maximum combined conducted output power. Device is a draft 802.11abgn router operating in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application JkLpjnkqylKwex2M+UrjiQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

D Link Corporation
17595 Mt. Herrmann
Fountain Valley, CA 92708
United States
  Date of Grant: 07/06/2010

Application Dated: 07/05/2010
 
Attention: Michael Boschma , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2IR815A1
Name of Grantee:  D Link Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless N Dual Band Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.047  

Power listed is the maximum combined conducted output power. Device is a draft 802.11abgn router operating in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: