FCC ID KA2M32A1
AX3200 WI-FI 6 AI MESH SYSTEM
by D-Link Corporation
Grantee Code: KA2 Product Code: M32A1
Latest application date: 2022-07-19
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2022-07-19 |
| 2402-2480 MHz | Original Equipment | 2021-10-04 |
| 2402-2480 MHz | Original Equipment | 2021-10-04 |
| 5180-5240 MHz | Original Equipment | 2021-10-04 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual_rev | Users Manual | 2022-04-03 | PDF 4.2 MB |
| Internal photos rev | Internal Photos | 2022-04-03 | PDF 838.9 KB |
| External photos rev | External Photos | 2022-04-03 | PDF 898.7 KB |
| Label Location | ID Label/Location Info | 2021-10-04 | PDF 396.6 KB |
| Label Sample rev | ID Label/Location Info | 2021-10-04 | PDF 224 KB |
| Test setup photos | Test Setup Photos | 2022-07-19 | PDF 506.8 KB |
| Test setup photos | Test Setup Photos | 2022-04-03 | PDF 456.4 KB |
| Test Report (DFS) rev2 | Test Report | 2022-07-19 | PDF 2.4 MB |
| Test Report (NII) rev2 | Test Report | 2022-07-19 | PDF 1.7 MB |
| Test Report (DTS-BTLE) rev | Test Report | 2021-10-04 | PDF 599.2 KB |
| Test report (DSS-BT EDR) rev | Test Report | 2021-10-04 | PDF 1,022 KB |
| Test report (DTS-WLAN) rev | Test Report | 2021-10-04 | PDF 2.8 MB |
| Test report (NII) rev | Test Report | 2021-10-04 | PDF 1.5 MB |
| Attestation (DFS Master Declaration) | Attestation Statements | 2022-07-19 | PDF 258.6 KB |
| Attestation (Channel and Mode Declaration) | Attestation Statements | 2021-10-04 | PDF 142.7 KB |
| Confidentiality request | Cover Letter(s) | 2022-07-19 | PDF 228.5 KB |
| Cover Letter (Agent Authorization) | Cover Letter(s) | 2022-07-19 | PDF 228.8 KB |
| Cover Letter (Contact Authorization) | Cover Letter(s) | 2022-07-19 | PDF 44.8 KB |
| Description of Change | Cover Letter(s) | 2022-07-19 | PDF 114.4 KB |
| Agent authorization | Cover Letter(s) | 2021-10-04 | PDF 209.6 KB |
| Confidentiality Request (Long term) | Cover Letter(s) | 2021-10-04 | PDF 219.5 KB |
| Confidentiality request (Long term) | Cover Letter(s) | 2021-10-04 | PDF 219.5 KB |
| Confidentiality request (Short term) | Cover Letter(s) | 2021-10-04 | PDF 184.8 KB |
| Contact Authorization | Cover Letter(s) | 2021-10-04 | PDF 227.3 KB |
| RF Exposure Info (MPE) rev | RF Exposure Info | 2022-07-19 | PDF 179.5 KB |
| RF Exposure Info (MPE) rev | RF Exposure Info | 2021-10-04 | PDF 179 KB |
| RF exposure info (MPE) rev | RF Exposure Info | 2021-10-04 | PDF 179 KB |
| Block diagram Metadata only | Block Diagram | PDF 180.6 KB | |
| Block diagram rev2 Metadata only | Block Diagram | PDF 180.6 KB | |
| Schematics rev2 Metadata only | Schematics | PDF 923.8 KB | |
| Operational Description Metadata only | Operational Description | PDF 326 KB | |
| Operational Description rev2 Metadata only | Operational Description | PDF 1 MB | |
| Software Operational Description rev2 Metadata only | Operational Description | PDF 1.3 MB | |
| Software Operational Description_rev Metadata only | Operational Description | PDF 1.2 MB |
Application Information
| Application ID | gdcUESdY5o9uxXePNfMPXg== |
|---|---|
| Final Action Date | 2022-07-19 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007371172 |
| Model | M32A1 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | AX3200 WI-FI 6 AI MESH SYSTEM |
| Responsible Party | Brett Adair, General Counsel, brett.adair@dlink.com  , 714-885-6282 |
| Agent | Debby Debby Debby, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, debby.lin@bureauveritas.com  , 886-3-3183232 |
| Test Firm | Eric Lin, Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch, eric-wp.lin@bureauveritas.com , +886-3-2600858 |
| TCB Email | certification@nacsemc.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Class II Permissive Change to add frequency bands 5.26-5.32GHz and 5.50-5.72GHz via software enabling as described in this filing. Power listed is maximum conducted output power. This device supports 20, 40 and 80 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 39 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device is restricted to indoor use only. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| gdcUESdY5o9uxXePNfMPXg== | 2022-07-19 | Class II permissive change or modification of presently authorized equipment |
| vzMWfA4FRNaWp1hWlML4eg== | 2021-10-04 | Original Equipment |
| mgeKsrn7NvFyDSd0fsz6yg== | 2021-10-04 | Original Equipment |
| AGfRELRC53ZKNFPkuT9+Yg== | 2021-10-04 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application vzMWfA4FRNaWp1hWlML4eg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 10/04/2021 Application Dated: 10/04/2021 |
| D-Link Corporation |
| 14420 Myford Road |
| Suite 100 |
| Irvine, CA 92606 |
| Attention: Brett Adair , General Counsel |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2M32A1 |
| Name of Grantee: | D-Link Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | AX3200 WI-FI 6 AI MESH SYSTEM |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.033 |
| Power listed is maximum conducted output power. The product must be installed such that its antenna(s) can provide a separation distance of at least 39 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application vzMWfA4FRNaWp1hWlML4eg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
D-Link Corporation 14420 Myford Road Suite 100 Irvine, CA 92606 United States |
Date of Grant: 10/04/2021 Application Dated: 10/04/2021 |
| Attention: Brett Adair , General Counsel |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2M32A1 |
| Name of Grantee: | D-Link Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | AX3200 WI-FI 6 AI MESH SYSTEM |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.033 |
| Power listed is maximum conducted output power. The product must be installed such that its antenna(s) can provide a separation distance of at least 39 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 10/04/2021 Application Dated: 10/04/2021 |
| D-Link Corporation |
| 14420 Myford Road |
| Suite 100 |
| Irvine, CA 92606 |
| Attention: Brett Adair , General Counsel |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2M32A1 |
| Name of Grantee: | D-Link Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | AX3200 WI-FI 6 AI MESH SYSTEM |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.93 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.036 |
| Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. The product must be installed such that its antenna(s) can provide a separation distance of at least 39 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application mgeKsrn7NvFyDSd0fsz6yg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
D-Link Corporation 14420 Myford Road Suite 100 Irvine, CA 92606 United States |
Date of Grant: 10/04/2021 Application Dated: 10/04/2021 |
| Attention: Brett Adair , General Counsel |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2M32A1 |
| Name of Grantee: | D-Link Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | AX3200 WI-FI 6 AI MESH SYSTEM |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.93 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.036 |
| Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. The product must be installed such that its antenna(s) can provide a separation distance of at least 39 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 07/19/2022 Application Dated: 07/18/2022 |
| D-Link Corporation |
| 14420 Myford Road |
| Suite 100 |
| Irvine, CA 92606 |
| Attention: Brett Adair , General Counsel |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2M32A1 |
| Name of Grantee: | D-Link Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | AX3200 WI-FI 6 AI MESH SYSTEM |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.55 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.505 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.21 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.182 |
| Class II Permissive Change to add frequency bands 5.26-5.32GHz and 5.50-5.72GHz via software enabling as described in this filing. Power listed is maximum conducted output power. This device supports 20, 40 and 80 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 39 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device is restricted to indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application gdcUESdY5o9uxXePNfMPXg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
D-Link Corporation 14420 Myford Road Suite 100 Irvine, CA 92606 United States |
Date of Grant: 07/19/2022 Application Dated: 07/18/2022 |
| Attention: Brett Adair , General Counsel |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2M32A1 |
| Name of Grantee: | D-Link Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | AX3200 WI-FI 6 AI MESH SYSTEM |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.55 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.505 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.21 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.182 |
| Class II Permissive Change to add frequency bands 5.26-5.32GHz and 5.50-5.72GHz via software enabling as described in this filing. Power listed is maximum conducted output power. This device supports 20, 40 and 80 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 39 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device is restricted to indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 10/04/2021 Application Dated: 10/04/2021 |
| D-Link Corporation |
| 14420 Myford Road |
| Suite 100 |
| Irvine, CA 92606 |
| Attention: Brett Adair , General Counsel |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2M32A1 |
| Name of Grantee: | D-Link Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | AX3200 WI-FI 6 AI MESH SYSTEM |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.55 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.505 |
| Power listed is maximum conducted output power. This device supports 20, 40 and 80 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 39 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device is restricted to indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application AGfRELRC53ZKNFPkuT9+Yg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
D-Link Corporation 14420 Myford Road Suite 100 Irvine, CA 92606 United States |
Date of Grant: 10/04/2021 Application Dated: 10/04/2021 |
| Attention: Brett Adair , General Counsel |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2M32A1 |
| Name of Grantee: | D-Link Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | AX3200 WI-FI 6 AI MESH SYSTEM |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.55 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.505 |
| Power listed is maximum conducted output power. This device supports 20, 40 and 80 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 39 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device is restricted to indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |