FCC ID KA2WL6610APA1

Unified AC Concurrent Dual-band PoE Access Point

by D-Link Corporation

Grantee Code: KA2   Product Code: WL6610APA1
Latest application date: 2015-07-16

FCC ID Device Details

FCC IDKA2WL6610APA1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeKA2
Product CodeWL6610APA1
Applicant BusinessD-Link Corporation 🇺🇸
Related Domains dlink.com
Equipment ClassUnified AC Concurrent Dual-band PoE Access Point
Test FirmBureau Veritas CPS (H.K.) Ltd., Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2015-07-16
2412-2462 MHzOriginal Equipment2015-07-16

Exhibits

DocumentTypeAvailableFile
User Manual.pdfUsers Manual2015-07-16PDF 865.4 KB
Internal Photos.pdfInternal Photos2015-07-16PDF 5.4 MB
External Photos.pdfExternal Photos2015-07-16PDF 1.9 MB
Label Location & Label Sample.pdfID Label/Location Info2015-07-16PDF 273.7 KB
Test Setup Photos.pdfTest Setup Photos2015-07-16PDF 366.3 KB
Test Report (DTS).pdfTest Report2015-07-16PDF 1.6 MB
Test Report (NII).pdfTest Report2015-07-16PDF 765.3 KB
Attestation (Channel and Mode Declaration).pdfAttestation Statements2015-07-16PDF 16.2 KB
Attestation (Professional Installation Declaration).pdfAttestation Statements2015-07-16PDF 20.4 KB
Confidentiality Request.pdfCover Letter(s)2015-07-16PDF 28.3 KB
Cover Letter (Agent Authorization).pdfCover Letter(s)2015-07-16PDF 23.1 KB
Cover Letter (Contact Authorization).pdfCover Letter(s)2015-07-16PDF 224.8 KB
RF Exposure Info (MPE).pdfRF Exposure Info2015-07-16PDF 33.1 KB
Block Diagram (5G module).pdf Metadata onlyBlock DiagramPDF 14 KB
Block Diagram.pdf Metadata onlyBlock DiagramPDF 13.2 KB
Schematics (5G module).pdf Metadata onlySchematicsPDF 98.1 KB
Schematics.pdf Metadata onlySchematicsPDF 446.6 KB
Operating Description.pdf Metadata onlyOperational DescriptionPDF 37.1 KB
Software Operating Description_rev 2.pdf Metadata onlyOperational DescriptionPDF 124.7 KB

Application Information

Application IDzDCDR9sdB30h2xNfEW9BcA==
Final Action Date2015-07-16
Application PurposeOriginal Equipment
Applicant FRN0007371172
ModelWL6610APA1
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionUnified AC Concurrent Dual-band PoE Access Point
Responsible PartyBrett Adair, General Counsel, brett.adair@dlink.com , 714-885-6282
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, richard.chen@bureauveritas.com , +886-3-2600884
TCB Emailcertification@curtis-straus.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is the maximum combined conducted output power. This device must be professionally installed. Marketing to the General Public is prohibited. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The use of other antenna requires a Class II Permissive Change filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 22 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. End -users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode.

Applications

Application IDDatePurpose
zDCDR9sdB30h2xNfEW9BcA==2015-07-16Original Equipment
EzjUJRyt3ZrkOm5cGqWGug==2015-07-16Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.491000015CCC, MO
5180-5240 MHz0.28215E38, CC, MO
5745-5825 MHz0.29215E38, CC, MO

Grants

TCB Grant - Application zDCDR9sdB30h2xNfEW9BcA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 07/16/2015

Application Dated: 07/16/2015
D-Link Corporation
14420 Myford Road
Suite 100
Irvine, CA 92606
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2WL6610APA1
Name of Grantee:  D-Link Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Unified AC Concurrent Dual-band PoE Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.282  
38 CC MO 15E 5745.0  -  5825.0 0.292  

Power listed is the maximum combined conducted output power. This device must be professionally installed. Marketing to the General Public is prohibited. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The use of other antenna requires a Class II Permissive Change filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 22 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. End -users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application zDCDR9sdB30h2xNfEW9BcA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

D-Link Corporation
14420 Myford Road Suite 100
Irvine, CA 92606
United States
  Date of Grant: 07/16/2015

Application Dated: 07/16/2015
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2WL6610APA1
Name of Grantee:  D-Link Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Unified AC Concurrent Dual-band PoE Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.282  
38 CC MO 15E 5745.0  -  5825.0 0.292  

Power listed is the maximum combined conducted output power. This device must be professionally installed. Marketing to the General Public is prohibited. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The use of other antenna requires a Class II Permissive Change filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 22 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. End -users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application EzjUJRyt3ZrkOm5cGqWGug==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 07/16/2015

Application Dated: 07/16/2015
D-Link Corporation
14420 Myford Road
Suite 100
Irvine, CA 92606
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2WL6610APA1
Name of Grantee:  D-Link Corporation
Equipment Class: Digital Transmission System
Notes: Unified AC Concurrent Dual-band PoE Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.491  

Power listed is the maximum combined conducted output power. This device must be professionally installed. Marketing to the General Public is prohibited. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The use of other antenna requires a Class II Permissive Change filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 22 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. End -users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth mode.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application EzjUJRyt3ZrkOm5cGqWGug==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

D-Link Corporation
14420 Myford Road Suite 100
Irvine, CA 92606
United States
  Date of Grant: 07/16/2015

Application Dated: 07/16/2015
 
Attention: Brett Adair , General Counsel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KA2WL6610APA1
Name of Grantee:  D-Link Corporation
Equipment Class: Digital Transmission System
Notes: Unified AC Concurrent Dual-band PoE Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.491  

Power listed is the maximum combined conducted output power. This device must be professionally installed. Marketing to the General Public is prohibited. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The use of other antenna requires a Class II Permissive Change filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 22 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. End -users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: