FCC ID KA2WM800AA1
HSPA+ module
by D-Link Corporation
Grantee Code: KA2 Product Code: WM800AA1
Latest application date: 2013-07-12
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 824.2-848.8 MHz | Original Equipment | 2013-07-12 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| user guide DWM-final | Users Manual | 2013-07-12 | PDF 1.1 MB |
| Internal photo | Internal Photos | 2013-07-12 | PDF 173 KB |
| external photo | External Photos | 2013-07-12 | PDF 222 KB |
| label | ID Label/Location Info | 2013-07-12 | PDF 196.4 KB |
| test setup photos | Test Setup Photos | 2013-07-12 | PDF 805.8 KB |
| ECIT-2013-0030-RF-2G3G-ALL | Test Report | 2013-07-12 | PDF 3.5 MB |
| FCC_ECIT-2013-0030-EMC | Test Report | 2013-07-12 | PDF 429.7 KB |
| confidentiality | Cover Letter(s) | 2013-07-12 | PDF 158.4 KB |
| cover letter | Cover Letter(s) | 2013-07-12 | PDF 419.6 KB |
| FCC-MPE-SAR -0030 | RF Exposure Info | 2013-07-12 | PDF 316.4 KB |
Application Information
| Application ID | NPaAjrj/jYdGzvGoXxokag== |
|---|---|
| Final Action Date | 2013-07-12 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0006207146 |
| Model | WM800AA1 |
| Frequency Range | 824.2-848.8 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | HSPA+ module |
| Responsible Party | Michael Boschma, Engineer, MBoschma@dlink.com  , 714-885-6105 |
| Agent | Liu Liu Liu, East china institute of Telecommunications, jarek@ecit.org.cn  , 86-21-63843300 |
| Technical Contact | Liu Jianquan, East china institute of Telecommunications, jarek@ecit.org.cn , 86-21-63843300 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power out is conducted at the antenna terminal. ERP for part 22 is 29.5 dBm and EIRP for part 24 is 29.95 dBm. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install the DMW-800B module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 2.92 dBi at 1900 MHz and -0.71 dBi at 850 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22 and the 2W eirp Part 24 power limits. The Grantee is responsible for providing the documentation required for modular use. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| NPaAjrj/jYdGzvGoXxokag== | 2013-07-12 | Original Equipment |
| BykoOYgiM8hqVHSpF48ZlQ== | 2013-07-12 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules |
|---|---|---|---|---|
| 824.2-848.8 MHz | 1.58 | 0.1ppm | 300KGXW | 22H |
| 824.2-848.8 MHz | 0.48 | 0.1ppm | 300KG7W | 22H |
| 826.4-846.6 MHz | 0.36 | 0.1ppm | 4M50F9W | 22H |
| 826.4-846.6 MHz | 0.145 | 0.1ppm | 4M50D7W | 22H |
| 1850.2-1909.8 MHz | 0.67 | 0.1ppm | 300KGXW | 24E |
| 1850.2-1909.8 MHz | 0.31 | 0.1ppm | 300KG7W | 24E |
| 1852.4-1907.6 MHz | 0.34 | 0.1ppm | 4M50F9W | 24E |
| 1852.4-1907.6 MHz | 0.137 | 0.1ppm | 4M50D7W | 24E |
Grants
TCB Grant - Application NPaAjrj/jYdGzvGoXxokag==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/12/2013 Application Dated: 07/10/2013 |
| D Link Corporation |
| 17595 Mt. Herrmann |
| Fountain Valley, CA 92708 |
| Attention: Michael Boschma , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2WM800AA1 |
| Name of Grantee: | D Link Corporation |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | HSPA+ module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.58 | 0.1 PM | 300KGXW | |
| 24E | 1850.2 - 1909.8 | 0.67 | 0.1 PM | 300KGXW | |
| 22H | 824.2 - 848.8 | 0.48 | 0.1 PM | 300KG7W | |
| 24E | 1850.2 - 1909.8 | 0.31 | 0.1 PM | 300KG7W | |
| 22H | 826.4 - 846.6 | 0.36 | 0.1 PM | 4M50F9W | |
| 24E | 1852.4 - 1907.6 | 0.34 | 0.1 PM | 4M50F9W | |
| 24E | 1852.4 - 1907.6 | 0.137 | 0.1 PM | 4M50D7W | |
| 22H | 826.4 - 846.6 | 0.145 | 0.1 PM | 4M50D7W |
| Single Modular Approval. Power out is conducted at the antenna terminal. ERP for part 22 is 29.5 dBm and EIRP for part 24 is 29.95 dBm. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install the DMW-800B module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 2.92 dBi at 1900 MHz and -0.71 dBi at 850 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22 and the 2W eirp Part 24 power limits. The Grantee is responsible for providing the documentation required for modular use. |
EAS Grant - Application NPaAjrj/jYdGzvGoXxokag==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
D Link Corporation 17595 Mt. Herrmann Fountain Valley, CA 92708 United States |
Date of Grant: 07/12/2013 Application Dated: 07/10/2013 |
| Attention: Michael Boschma , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2WM800AA1 |
| Name of Grantee: | D Link Corporation |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | HSPA+ module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.58 | 0.1 PM | 300KGXW | |
| 24E | 1850.2 - 1909.8 | 0.67 | 0.1 PM | 300KGXW | |
| 22H | 824.2 - 848.8 | 0.48 | 0.1 PM | 300KG7W | |
| 24E | 1850.2 - 1909.8 | 0.31 | 0.1 PM | 300KG7W | |
| 22H | 826.4 - 846.6 | 0.36 | 0.1 PM | 4M50F9W | |
| 24E | 1852.4 - 1907.6 | 0.34 | 0.1 PM | 4M50F9W | |
| 24E | 1852.4 - 1907.6 | 0.137 | 0.1 PM | 4M50D7W | |
| 22H | 826.4 - 846.6 | 0.145 | 0.1 PM | 4M50D7W |
| Single Modular Approval. Power out is conducted at the antenna terminal. ERP for part 22 is 29.5 dBm and EIRP for part 24 is 29.95 dBm. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install the DMW-800B module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 2.92 dBi at 1900 MHz and -0.71 dBi at 850 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22 and the 2W eirp Part 24 power limits. The Grantee is responsible for providing the documentation required for modular use. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/12/2013 Application Dated: 07/10/2013 |
| D Link Corporation |
| 17595 Mt. Herrmann |
| Fountain Valley, CA 92708 |
| Attention: Michael Boschma , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2WM800AA1 |
| Name of Grantee: | D Link Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | HSPA+ module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
| This device contains GSM/WCDMA transmitters. |
EAS Grant - Application BykoOYgiM8hqVHSpF48ZlQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
D Link Corporation 17595 Mt. Herrmann Fountain Valley, CA 92708 United States |
Date of Grant: 07/12/2013 Application Dated: 07/10/2013 |
| Attention: Michael Boschma , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2WM800AA1 |
| Name of Grantee: | D Link Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | HSPA+ module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
| This device contains GSM/WCDMA transmitters. |
| Mail To: |