FCC ID KA2WR330A1
EVDO Mobile Hotspot
by D-Link Corporation
Grantee Code: KA2 Product Code: WR330A1
Latest application date: 2014-09-22
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2014-09-22 |
| 2412-2462 MHz | Original Equipment | 2014-05-11 |
| 824.7-848.3 MHz | Original Equipment | 2014-05-11 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| DWR330_User_Manual_V1.3_20140428.pdf | Users Manual | 2014-05-11 | PDF 646.3 KB |
| internal photo | Internal Photos | 2014-09-22 | PDF 1 MB |
| internal photo-ver1.pdf | Internal Photos | 2014-05-11 | PDF 461.4 KB |
| External photo | External Photos | 2014-09-22 | PDF 738.9 KB |
| External photo.pdf | External Photos | 2014-05-11 | PDF 738.9 KB |
| Label&location-ver1.pdf | ID Label/Location Info | 2014-05-11 | PDF 108.5 KB |
| Test Setup photo-SAR.pdf | Test Setup Photos | 2014-05-11 | PDF 321.6 KB |
| Test setup photo-EMC.pdf | Test Setup Photos | 2014-05-11 | PDF 280.7 KB |
| 2014WLA0068-ver1 | Test Report | 2014-09-22 | PDF 1.8 MB |
| 2014RFA0019-ver2.pdf | Test Report | 2014-05-11 | PDF 3.8 MB |
| 2014WLA0019-ver1.0.pdf | Test Report | 2014-05-11 | PDF 3 MB |
| FCC_POA_October_2012 | Attestation Statements | 2014-09-22 | PDF 221.3 KB |
| Authority | Cover Letter(s) | 2014-09-22 | PDF 38.6 KB |
| C2PC cover letter-ver2 | Cover Letter(s) | 2014-09-22 | PDF 297.7 KB |
| Confidentiality | Cover Letter(s) | 2014-09-22 | PDF 90.8 KB |
| Authority.pdf | Cover Letter(s) | 2014-05-11 | PDF 38.6 KB |
| Confidential_FCC_POA_October_2012.pdf | Cover Letter(s) | 2014-05-11 | PDF 221.3 KB |
| Confidentiality.pdf | Cover Letter(s) | 2014-05-11 | PDF 90.8 KB |
| 2014 SAR0068-ver1 | RF Exposure Info | 2014-09-22 | PDF 5.4 MB |
| 2014SAR0019 part2.pdf | RF Exposure Info | 2014-05-11 | PDF 3.9 MB |
| 2014SAR0019-ver1 part1.pdf | RF Exposure Info | 2014-05-11 | PDF 3.3 MB |
| Confidential_DWR330 Block Diagram.pdf Metadata only | Block Diagram | PDF 33.2 KB | |
| Confidential_wifi module Block Diagram.pdf Metadata only | Block Diagram | PDF 77.5 KB | |
| Confidential_(DWR330)Schematic.pdf Metadata only | Schematics | PDF 249.8 KB | |
| DWR330 Operational Description-ver1.2.pdf Metadata only | Operational Description | PDF 168 KB | |
| PIN definition Metadata only | Operational Description | PDF 488.1 KB | |
| Confidential_DWR-330 parts list.pdf Metadata only | Parts List/Tune Up Info | PDF 80.4 KB | |
| Confidential_DWR330_ME_BOM.pdf Metadata only | Parts List/Tune Up Info | PDF 95.6 KB | |
| Confidential_DWR330_SMT_BOM.pdf Metadata only | Parts List/Tune Up Info | PDF 135.7 KB | |
| Confidential_Tune Up Procedure for DWR330.pdf Metadata only | Parts List/Tune Up Info | PDF 118.6 KB |
Application Information
| Application ID | NqLyJvvBs8B4xMuGmdoWSA== |
|---|---|
| Final Action Date | 2014-09-22 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007371172 |
| Model | WR330A1 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | EVDO Mobile Hotspot |
| Responsible Party | Brett Adair, General Counsel, brett.adair@dlink.com  , 714-885-6282 |
| Technical Contact | Liu Jianquan, East china institute of Telecommunications, jarek@ecit.org.cn  , 86-21-63843300 |
| Test Firm | Jing Li, East China Institute of Telecommunications, lijing@ecit.org.cn , 862-163-8433 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change, replacement of a chip. Power Output is conducted. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 1.0 cm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for body-worn accessory and simultaneous transmission conditions are 0.12 W/kg and 1.40 W/kg, respectively. This device contains CDMA transmitters. This device has a 20 MHz bandwidth mode. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| NqLyJvvBs8B4xMuGmdoWSA== | 2014-09-22 | Class II permissive change or modification of presently authorized equipment |
| ZGLrQySAXvl+kL8fcVX3Xg== | 2014-05-11 | Original Equipment |
| QF3h1eafmrp4Pv1KIgMY5Q== | 2014-05-11 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application ZGLrQySAXvl+kL8fcVX3Xg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/11/2014 Application Dated: 05/09/2014 |
| D-Link Corporation |
| 14420 Myford Road |
| Suite 100 |
| Irvine, CA 92606 |
| Attention: Brett Adair , General Counsel |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2WR330A1 |
| Name of Grantee: | D-Link Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | EVDO Mobile Hotspot |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.091 |
| Power Output is conducted. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 1.0 cm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for body-worn accessory and simultaneous transmission conditions are 0.12 W/kg and 1.40 W/kg, respectively. This device contains CDMA transmitters. This device has a 20 MHz bandwidth mode. |
EAS Grant - Application ZGLrQySAXvl+kL8fcVX3Xg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
D-Link Corporation 14420 Myford Road Suite 100 Irvine, CA 92606 United States |
Date of Grant: 05/11/2014 Application Dated: 05/09/2014 |
| Attention: Brett Adair , General Counsel |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2WR330A1 |
| Name of Grantee: | D-Link Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | EVDO Mobile Hotspot |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.091 |
| Power Output is conducted. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 1.0 cm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for body-worn accessory and simultaneous transmission conditions are 0.12 W/kg and 1.40 W/kg, respectively. This device contains CDMA transmitters. This device has a 20 MHz bandwidth mode. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/11/2014 Application Dated: 05/09/2014 |
| D-Link Corporation |
| 14420 Myford Road |
| Suite 100 |
| Irvine, CA 92606 |
| Attention: Brett Adair , General Counsel |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2WR330A1 |
| Name of Grantee: | D-Link Corporation |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | EVDO Mobile Hotspot |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 22H | 824.7 - 848.3 | 0.189 | 0.1 PM | 300KGXW |
| BC | 24E | 1851.2 - 1908.7 | 0.151 | 0.1 PM | 300KGXW |
| Power Output is ERP for Part 22 and EIRP for Part 24. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 1.0 cm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for body-worn accessory and simultaneous transmission conditions are 1.28 W/kg and 1.40 W/kg, respectively. This device contains WLAN transmitter. |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
EAS Grant - Application QF3h1eafmrp4Pv1KIgMY5Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
D-Link Corporation 14420 Myford Road Suite 100 Irvine, CA 92606 United States |
Date of Grant: 05/11/2014 Application Dated: 05/09/2014 |
| Attention: Brett Adair , General Counsel |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2WR330A1 |
| Name of Grantee: | D-Link Corporation |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | EVDO Mobile Hotspot |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 22H | 824.7 - 848.3 | 0.189 | 0.1 PM | 300KGXW |
| BC | 24E | 1851.2 - 1908.7 | 0.151 | 0.1 PM | 300KGXW |
| Power Output is ERP for Part 22 and EIRP for Part 24. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 1.0 cm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for body-worn accessory and simultaneous transmission conditions are 1.28 W/kg and 1.40 W/kg, respectively. This device contains WLAN transmitter. |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/22/2014 Application Dated: 09/22/2014 |
| D-Link Corporation |
| 14420 Myford Road |
| Suite 100 |
| Irvine, CA 92606 |
| Attention: Brett Adair , General Counsel |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2WR330A1 |
| Name of Grantee: | D-Link Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | EVDO Mobile Hotspot |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.091 |
| Class II Permissive Change, replacement of a chip. Power Output is conducted. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 1.0 cm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for body-worn accessory and simultaneous transmission conditions are 0.12 W/kg and 1.40 W/kg, respectively. This device contains CDMA transmitters. This device has a 20 MHz bandwidth mode. |
EAS Grant - Application NqLyJvvBs8B4xMuGmdoWSA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
D-Link Corporation 14420 Myford Road Suite 100 Irvine, CA 92606 United States |
Date of Grant: 09/22/2014 Application Dated: 09/22/2014 |
| Attention: Brett Adair , General Counsel |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KA2WR330A1 |
| Name of Grantee: | D-Link Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | EVDO Mobile Hotspot |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.091 |
| Class II Permissive Change, replacement of a chip. Power Output is conducted. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 1.0 cm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for body-worn accessory and simultaneous transmission conditions are 0.12 W/kg and 1.40 W/kg, respectively. This device contains CDMA transmitters. This device has a 20 MHz bandwidth mode. |
| Mail To: |