FCC ID KBCIX600-IWL

IX600-IWL

by General Dynamics Itronix Corporation

Grantee Code: KBC   Product Code: IX600IWL
Latest application date: 2006-09-08

FCC ID Device Details

FCC IDKBCIX600-IWL
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeKBC
Product CodeIX600IWL
Applicant BusinessGeneral Dynamics Itronix Corporation 🇺🇸
Related Domains gd-itronix.com
Equipment ClassIX600-IWL
Test FirmNorthwest EMC, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2006-09-08
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2006-09-08
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2006-03-23
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2006-03-23
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2006-01-20
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2006-01-19
2412-2462 MHzOriginal Equipment2005-06-13
5180-5240 MHzOriginal Equipment2005-06-13

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2006-09-08PDF 1.2 MB
Users ManualUsers Manual2006-09-08PDF 1.2 MB
Users ManualUsers Manual2006-03-23PDF 22.5 KB
Safety InfoUsers Manual2006-01-20PDF 21.3 KB
IX 600 ManualUsers Manual2005-06-13PDF 2 MB
IX 600 Users ManualUsers Manual2005-06-13PDF 2 MB
RF Module ManualUsers Manual2005-06-13PDF 1.2 MB
RF Safety InformationUsers Manual2005-06-13PDF 19.1 KB
Radio Safety InfoUsers Manual2005-06-13PDF 19.1 KB
Internal PhotosInternal Photos2006-03-23PDF 853.3 KB
Internal PhotosInternal Photos2006-01-20PDF 1.2 MB
Internal Photos Metadata onlyInternal Photos2005-06-13PDF 1.4 MB
Internal Photos Revised For ErrorInternal Photos2005-06-13PDF 516.5 KB
Internal Photos Revised for ErrorInternal Photos2005-06-13PDF 516.5 KB
External PhotosExternal Photos2005-06-13PDF 550 KB
FCC ID LabelID Label/Location Info2006-09-08PDF 938.1 KB
ID LabelID Label/Location Info2006-03-23PDF 313.5 KB
FCC ID LabelID Label/Location Info2006-01-20PDF 272.3 KB
Label InformationID Label/Location Info2005-06-13PDF 343.1 KB
Antenna InfoOperational Description2006-03-23PDF 28.7 KB
Test Setup PhotosTest Setup Photos2006-03-23PDF 376.6 KB
Test PhotosTest Setup Photos2005-06-13PDF 411.8 KB
Test ReportTest Report2006-03-23PDF 243.4 KB
Test reportTest Report2006-03-23PDF 243.4 KB
Test Report Part 1Test Report2005-06-13PDF 3.2 MB
Test Report Part 2Test Report2005-06-13PDF 2.8 MB
Test Report Part 3Test Report2005-06-13PDF 3.8 MB
Attestation regarding Professional InstallationAttestation Statements2006-03-23PDF 129.2 KB
Attestation regarding professional installationAttestation Statements2006-03-23PDF 129.2 KB
Fequency Selection AttestationAttestation Statements2005-06-13PDF 179 KB
Frequency Selection AttestationAttestation Statements2005-06-13PDF 179 KB
Agent Authorization letterCover Letter(s)2006-09-08PDF 133.4 KB
Agent authorization letterCover Letter(s)2006-09-08PDF 133.4 KB
Compliance OpinionCover Letter(s)2006-09-08PDF 17.8 KB
Cover letterCover Letter(s)2006-09-08PDF 122.5 KB
Agent Authorization letterCover Letter(s)2006-03-23PDF 28 KB
Compliance OpinionCover Letter(s)2006-03-23PDF 30.1 KB
Cover letterCover Letter(s)2006-03-23PDF 32.6 KB
Compliance OpinionCover Letter(s)2006-01-20PDF 15.6 KB
Cover letterCover Letter(s)2006-01-20PDF 51 KB
Comments 2Cover Letter(s)2005-06-13PDF 46 KB
Comments and ResponseCover Letter(s)2005-06-13PDF 50 KB
Comments and Response 1Cover Letter(s)2005-06-13PDF 50 KB
Cover LettersCover Letter(s)2005-06-13PDF 43.3 KB
Itronix POACover Letter(s)2005-06-13PDF 27.9 KB
Winstron POACover Letter(s)2005-06-13PDF 73.8 KB
Wistron POACover Letter(s)2005-06-13PDF 73.8 KB
MPE Estimates 1RF Exposure Info2006-09-08PDF 53.8 KB
MPE Estimates 2RF Exposure Info2006-09-08PDF 52.3 KB
MPE Estimates 1RF Exposure Info2006-03-23PDF 116.1 KB
MPE Estimates 2RF Exposure Info2006-03-23PDF 80.3 KB
RF Exposure 1RF Exposure Info2006-03-23PDF 116.1 KB
RF Exposure 2RF Exposure Info2006-03-23PDF 80.3 KB
RF ExposureRF Exposure Info2006-01-20PDF 47.5 KB
RF Exposure InfoRF Exposure Info2005-06-13PDF 96.8 KB
RF Block Metadata onlyBlock DiagramPDF 17.8 KB
RF Block Diagram Metadata onlyBlock DiagramPDF 17.8 KB
System Block Metadata onlyBlock DiagramPDF 12.3 KB
System Block Diagram Metadata onlyBlock DiagramPDF 12.3 KB
Module Schematic Metadata onlySchematicsPDF 1,016.2 KB
RF Schematics Metadata onlySchematicsPDF 1,016.2 KB
System Schematics Metadata onlySchematicsPDF 1.3 MB
Antenna Information Metadata onlyOperational DescriptionPDF 180.3 KB
Functional Description Revised Metadata onlyOperational DescriptionPDF 95.4 KB
Functional Description Updated Metadata onlyOperational DescriptionPDF 95.4 KB
Operational Description Metadata onlyOperational DescriptionPDF 468.6 KB
Product Specificaitons Metadata onlyOperational DescriptionPDF 468.6 KB

Application Information

Application IDhUGXl1LnsfinV61/9JirYQ==
Final Action Date2006-09-08
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0005036744
ModelIX600-IWL
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionIX600-IWL
Responsible PartyRay Garcia, Agency Manager, ray.garcia@gd-itronix.com , 954.846.3350
AgentRod Rod Rod, Spectrum Technologies, rmunro@spectrumti.com , 425-771-4482
Test FirmGreg Kiemel, Northwest EMC, Inc., gkiemel@nwemc.com , 503-844-4066
TCB Emaildghizzone@nwemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is conducted. Collocated transmitter operating configuration with optional FCC ID: KBCIX600-MC75 or FCC ID: KBCIX600-MC8765 has been evaluated as described in this filing under this FCC ID. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operated in conjunction with any other antenna or transmitter not described in application filings under this FCC ID. Other collocation configurations require separate evaluation. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The vehicle mount antennas, models BMAXC24503 and BMAXC24505 shall be installed by Itronix trained professional installation teams.

Applications

Application IDDatePurpose
hUGXl1LnsfinV61/9JirYQ==2006-09-08Class II permissive change or modification of presently authorized equipment
UWdeHcd/lOLZ4Kh1S86fUw==2006-09-08Class II permissive change or modification of presently authorized equipment
bI/W88HJnPP7vpMD4slwvA==2006-03-23Class II permissive change or modification of presently authorized equipment
0Ve0QqJwUBk/F473t1hj6g==2006-03-23Class II permissive change or modification of presently authorized equipment
zXwdUXrh6Yhh/sLb65Ek/w==2006-01-20Class II permissive change or modification of presently authorized equipment
sAIRA4oC2U9LEqqffCBrVw==2006-01-19Class II permissive change or modification of presently authorized equipment
ceSnLut2HYSFx479xxIsjA==2005-06-13Original Equipment
XXDQcwWSvSOmHDFjhKw32g==2005-06-13Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.093000015C28, 68, CC
2412-2462 MHz0.093000015C68, CC
2412-2462 MHz0.093000015C28, 68
5180-5240 MHz0.01915E28, 68, CC
5180-5240 MHz0.01915E28, 68
5180-5240 MHz0.01915E68, CC
5260-5320 MHz0.10115E28, 68, CC
5260-5320 MHz0.10115E28, 68
5260-5320 MHz0.10115E68, CC
5745-5805 MHz0.06115E28, 68, CC
5745-5805 MHz0.06115E28, 68
5745-5805 MHz0.06115E68, CC

Grants

TCB Grant - Application zXwdUXrh6Yhh/sLb65Ek/w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Portland - Evergreen
6775 NE Evergreen Parkway, Suite 400
Hillsboro, OR 97124
Date of Grant: 01/20/2006

Application Dated: 01/20/2006
General Dynamics Itronix Corporation
1000 Sawgrass Corporate Parkway
Suite 300
Sunrise, FL 33323
 
Attention: Ray Garcia , Agency Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KBCIX600-IWL
Name of Grantee:  General Dynamics Itronix Corporation
Equipment Class: Digital Transmission System
Notes: IX600-IWL
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
68 CC 15C 2412.0  -  2462.0 0.093  

Power Output listed is conducted. Collocated transmitter operating configuration with optional FCC ID: KBCIX600-EM5625 has been evaluated as described in this filing under this FCC ID. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operated in conjunction with any other antenna or transmitter not described in application filings under this FCC ID. Other collocation configurations require separate evaluation. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

68: This grant does not pertain to equipment approval requirements under Part 68.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application zXwdUXrh6Yhh/sLb65Ek/w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

General Dynamics Itronix Corporation
1000 Sawgrass Corporate Parkway Suite 300
Sunrise, FL 33323
United States
  Date of Grant: 01/20/2006

Application Dated: 01/20/2006
 
Attention: Ray Garcia , Agency Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KBCIX600-IWL
Name of Grantee:  General Dynamics Itronix Corporation
Equipment Class: Digital Transmission System
Notes: IX600-IWL
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
68 CC 15C 2412.0  -  2462.0 0.093  

Power Output listed is conducted. Collocated transmitter operating configuration with optional FCC ID: KBCIX600-EM5625 has been evaluated as described in this filing under this FCC ID. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operated in conjunction with any other antenna or transmitter not described in application filings under this FCC ID. Other collocation configurations require separate evaluation. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


68: This grant does not pertain to equipment approval requirements under Part 68.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application XXDQcwWSvSOmHDFjhKw32g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 06/13/2005

Application Dated: 06/13/2005
General Dynamics Itronix Corporation
1000 Sawgrass Corporate Parkway
Suite 300
Sunrise, FL 33323
 
Attention: Ray Garcia , Agency Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KBCIX600-IWL
Name of Grantee:  General Dynamics Itronix Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Laptop with WLAN
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
68 CC 15E 5180.0  -  5240.0 0.019  
68 CC 15E 5260.0  -  5320.0 0.101  
68 CC 15E 5745.0  -  5805.0 0.061  

Power Output listed is Conducted. This device is authorized for use only with the integrated mini-PCI card specified in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

68: This grant does not pertain to equipment approval requirements under Part 68.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application XXDQcwWSvSOmHDFjhKw32g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

General Dynamics Itronix Corporation
1000 Sawgrass Corporate Parkway Suite 300
Sunrise, FL 33323
United States
  Date of Grant: 06/13/2005

Application Dated: 06/13/2005
 
Attention: Ray Garcia , Agency Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KBCIX600-IWL
Name of Grantee:  General Dynamics Itronix Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Laptop with WLAN
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
68 CC 15E 5180.0  -  5240.0 0.019  
68 CC 15E 5260.0  -  5320.0 0.101  
68 CC 15E 5745.0  -  5805.0 0.061  

Power Output listed is Conducted. This device is authorized for use only with the integrated mini-PCI card specified in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


68: This grant does not pertain to equipment approval requirements under Part 68.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application UWdeHcd/lOLZ4Kh1S86fUw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Portland - Evergreen
6775 NE Evergreen Parkway, Suite 400
Hillsboro, OR 97124
Date of Grant: 09/08/2006

Application Dated: 09/08/2006
General Dynamics Itronix Corporation
1000 Sawgrass Corporate Parkway
Suite 300
Sunrise, FL 33323
 
Attention: Ray Garcia , Agency Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KBCIX600-IWL
Name of Grantee:  General Dynamics Itronix Corporation
Equipment Class: Digital Transmission System
Notes: IX600-IWL
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 68 15C 2412.0  -  2462.0 0.093  

Power Output listed is conducted. Collocated transmitter operating configuration with optional FCC ID: KBCIX600-MC75 or FCC ID: KBCIX600-MC8765 has been evaluated as described in this filing under this FCC ID. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operated in conjunction with any other antenna or transmitter not described in application filings under this FCC ID. Other collocation configurations require separate evaluation. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The vehicle mount antennas, models BMAXC24503 and BMAXC24505 shall be installed by Itronix trained professional installation teams.

28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
68: This grant does not pertain to equipment approval requirements under Part 68.

EAS Grant - Application UWdeHcd/lOLZ4Kh1S86fUw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

General Dynamics Itronix Corporation
1000 Sawgrass Corporate Parkway Suite 300
Sunrise, FL 33323
United States
  Date of Grant: 09/08/2006

Application Dated: 09/08/2006
 
Attention: Ray Garcia , Agency Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KBCIX600-IWL
Name of Grantee:  General Dynamics Itronix Corporation
Equipment Class: Digital Transmission System
Notes: IX600-IWL
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 68 15C 2412.0  -  2462.0 0.093  

Power Output listed is conducted. Collocated transmitter operating configuration with optional FCC ID: KBCIX600-MC75 or FCC ID: KBCIX600-MC8765 has been evaluated as described in this filing under this FCC ID. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operated in conjunction with any other antenna or transmitter not described in application filings under this FCC ID. Other collocation configurations require separate evaluation. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The vehicle mount antennas, models BMAXC24503 and BMAXC24505 shall be installed by Itronix trained professional installation teams.


28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
68: This grant does not pertain to equipment approval requirements under Part 68.

TCB Grant - Application sAIRA4oC2U9LEqqffCBrVw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Portland - Evergreen
6775 NE Evergreen Parkway, Suite 400
Hillsboro, OR 97124
Date of Grant: 01/19/2006

Application Dated: 01/19/2006
General Dynamics Itronix Corporation
1000 Sawgrass Corporate Parkway
Suite 300
Sunrise, FL 33323
 
Attention: Ray Garcia , Agency Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KBCIX600-IWL
Name of Grantee:  General Dynamics Itronix Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IX600-IWL
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 68 CC 15E 5180.0  -  5240.0 0.019  
28 68 CC 15E 5260.0  -  5320.0 0.101  
28 68 CC 15E 5745.0  -  5805.0 0.061  

Power Output listed is conducted. Collocated transmitter operating configuration with optional FCC ID: KBCIX600-EM5625 has been evaluated as described in this filing under this FCC ID. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operated in conjunction with any other antenna or transmitter not described in application filings under this FCC ID. Other collocation configurations require separate evaluation. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
68: This grant does not pertain to equipment approval requirements under Part 68.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application sAIRA4oC2U9LEqqffCBrVw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

General Dynamics Itronix Corporation
1000 Sawgrass Corporate Parkway Suite 300
Sunrise, FL 33323
United States
  Date of Grant: 01/19/2006

Application Dated: 01/19/2006
 
Attention: Ray Garcia , Agency Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KBCIX600-IWL
Name of Grantee:  General Dynamics Itronix Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IX600-IWL
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 68 CC 15E 5180.0  -  5240.0 0.019  
28 68 CC 15E 5260.0  -  5320.0 0.101  
28 68 CC 15E 5745.0  -  5805.0 0.061  

Power Output listed is conducted. Collocated transmitter operating configuration with optional FCC ID: KBCIX600-EM5625 has been evaluated as described in this filing under this FCC ID. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operated in conjunction with any other antenna or transmitter not described in application filings under this FCC ID. Other collocation configurations require separate evaluation. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
68: This grant does not pertain to equipment approval requirements under Part 68.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application hUGXl1LnsfinV61/9JirYQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Portland - Evergreen
6775 NE Evergreen Parkway, Suite 400
Hillsboro, OR 97124
Date of Grant: 09/08/2006

Application Dated: 09/08/2006
General Dynamics Itronix Corporation
1000 Sawgrass Corporate Parkway
Suite 300
Sunrise, FL 33323
 
Attention: Ray Garcia , Agency Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KBCIX600-IWL
Name of Grantee:  General Dynamics Itronix Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IX600-IWL
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 68 15E 5180.0  -  5240.0 0.019  
28 68 15E 5260.0  -  5320.0 0.101  
28 68 15E 5745.0  -  5805.0 0.061  

Power Output listed is conducted. Collocated transmitter operating configuration with optional FCC ID: KBCIX600-MC75 or FCC ID: KBCIX600-MC8765 has been evaluated as described in this filing under this FCC ID. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operated in conjunction with any other antenna or transmitter not described in application filings under this FCC ID. Other collocation configurations require separate evaluation. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The vehicle mount antennas, models BMAXC24503 and BMAXC24505 shall be installed by Itronix trained professional installation teams.

28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
68: This grant does not pertain to equipment approval requirements under Part 68.

EAS Grant - Application hUGXl1LnsfinV61/9JirYQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

General Dynamics Itronix Corporation
1000 Sawgrass Corporate Parkway Suite 300
Sunrise, FL 33323
United States
  Date of Grant: 09/08/2006

Application Dated: 09/08/2006
 
Attention: Ray Garcia , Agency Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KBCIX600-IWL
Name of Grantee:  General Dynamics Itronix Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IX600-IWL
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 68 15E 5180.0  -  5240.0 0.019  
28 68 15E 5260.0  -  5320.0 0.101  
28 68 15E 5745.0  -  5805.0 0.061  

Power Output listed is conducted. Collocated transmitter operating configuration with optional FCC ID: KBCIX600-MC75 or FCC ID: KBCIX600-MC8765 has been evaluated as described in this filing under this FCC ID. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operated in conjunction with any other antenna or transmitter not described in application filings under this FCC ID. Other collocation configurations require separate evaluation. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The vehicle mount antennas, models BMAXC24503 and BMAXC24505 shall be installed by Itronix trained professional installation teams.


28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
68: This grant does not pertain to equipment approval requirements under Part 68.

TCB Grant - Application ceSnLut2HYSFx479xxIsjA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 06/13/2005

Application Dated: 06/13/2005
General Dynamics Itronix Corporation
1000 Sawgrass Corporate Parkway
Suite 300
Sunrise, FL 33323
 
Attention: Ray Garcia , Agency Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KBCIX600-IWL
Name of Grantee:  General Dynamics Itronix Corporation
Equipment Class: Digital Transmission System
Notes: Laptop with WLAN
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
68 CC 15C 2412.0  -  2462.0 0.093  

Power Output listed is Conducted. This device is authorized for use only with the integrated mini-PCI card specified in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

68: This grant does not pertain to equipment approval requirements under Part 68.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ceSnLut2HYSFx479xxIsjA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

General Dynamics Itronix Corporation
1000 Sawgrass Corporate Parkway Suite 300
Sunrise, FL 33323
United States
  Date of Grant: 06/13/2005

Application Dated: 06/13/2005
 
Attention: Ray Garcia , Agency Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KBCIX600-IWL
Name of Grantee:  General Dynamics Itronix Corporation
Equipment Class: Digital Transmission System
Notes: Laptop with WLAN
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
68 CC 15C 2412.0  -  2462.0 0.093  

Power Output listed is Conducted. This device is authorized for use only with the integrated mini-PCI card specified in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


68: This grant does not pertain to equipment approval requirements under Part 68.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application bI/W88HJnPP7vpMD4slwvA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Portland - Evergreen
6775 NE Evergreen Parkway, Suite 400
Hillsboro, OR 97124
Date of Grant: 03/23/2006

Application Dated: 03/23/2006
General Dynamics Itronix Corporation
1000 Sawgrass Corporate Parkway
Suite 300
Sunrise, FL 33323
 
Attention: Ray Garcia , Agency Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KBCIX600-IWL
Name of Grantee:  General Dynamics Itronix Corporation
Equipment Class: Digital Transmission System
Notes: IX600-IWL
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 68 CC 15C 2412.0  -  2462.0 0.093  

Power Output listed is conducted. Collocated transmitter operating configuration with optional FCC ID: KBCIX600-MC75 has been evaluated as described in this filing under this FCC ID. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operated in conjunction with any other antenna or transmitter not described in application filings under this FCC ID. Other collocation configurations require separate evaluation. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The vehicle mount antennas, models BMAXC24503 and BMAXC24505 shall be installed by Itronix trained professional installation teams.

28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
68: This grant does not pertain to equipment approval requirements under Part 68.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application bI/W88HJnPP7vpMD4slwvA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

General Dynamics Itronix Corporation
1000 Sawgrass Corporate Parkway Suite 300
Sunrise, FL 33323
United States
  Date of Grant: 03/23/2006

Application Dated: 03/23/2006
 
Attention: Ray Garcia , Agency Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KBCIX600-IWL
Name of Grantee:  General Dynamics Itronix Corporation
Equipment Class: Digital Transmission System
Notes: IX600-IWL
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 68 CC 15C 2412.0  -  2462.0 0.093  

Power Output listed is conducted. Collocated transmitter operating configuration with optional FCC ID: KBCIX600-MC75 has been evaluated as described in this filing under this FCC ID. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operated in conjunction with any other antenna or transmitter not described in application filings under this FCC ID. Other collocation configurations require separate evaluation. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The vehicle mount antennas, models BMAXC24503 and BMAXC24505 shall be installed by Itronix trained professional installation teams.


28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
68: This grant does not pertain to equipment approval requirements under Part 68.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 0Ve0QqJwUBk/F473t1hj6g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Portland - Evergreen
6775 NE Evergreen Parkway, Suite 400
Hillsboro, OR 97124
Date of Grant: 03/23/2006

Application Dated: 03/23/2006
General Dynamics Itronix Corporation
1000 Sawgrass Corporate Parkway
Suite 300
Sunrise, FL 33323
 
Attention: Ray Garcia , Agency Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KBCIX600-IWL
Name of Grantee:  General Dynamics Itronix Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IX600-IWL
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 68 CC 15E 5180.0  -  5240.0 0.019  
28 68 CC 15E 5260.0  -  5320.0 0.101  
28 68 CC 15E 5745.0  -  5805.0 0.061  

Power Output listed is conducted. Collocated transmitter operating configuration with optional FCC ID: KBCIX600-MC75 has been evaluated as described in this filing under this FCC ID. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operated in conjunction with any other antenna or transmitter not described in application filings under this FCC ID. Other collocation configurations require separate evaluation. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The vehicle mount antennas, models BMAXC24503 and BMAXC24505 shall be installed by Itronix trained professional installation teams.

28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
68: This grant does not pertain to equipment approval requirements under Part 68.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 0Ve0QqJwUBk/F473t1hj6g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

General Dynamics Itronix Corporation
1000 Sawgrass Corporate Parkway Suite 300
Sunrise, FL 33323
United States
  Date of Grant: 03/23/2006

Application Dated: 03/23/2006
 
Attention: Ray Garcia , Agency Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KBCIX600-IWL
Name of Grantee:  General Dynamics Itronix Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IX600-IWL
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 68 CC 15E 5180.0  -  5240.0 0.019  
28 68 CC 15E 5260.0  -  5320.0 0.101  
28 68 CC 15E 5745.0  -  5805.0 0.061  

Power Output listed is conducted. Collocated transmitter operating configuration with optional FCC ID: KBCIX600-MC75 has been evaluated as described in this filing under this FCC ID. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operated in conjunction with any other antenna or transmitter not described in application filings under this FCC ID. Other collocation configurations require separate evaluation. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The vehicle mount antennas, models BMAXC24503 and BMAXC24505 shall be installed by Itronix trained professional installation teams.


28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
68: This grant does not pertain to equipment approval requirements under Part 68.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: