FCC ID KCHVXU3600
Vehicle Transceiver Unit
by Sensus Metering Systems
Grantee Code: KCH Product Code: VXU3600
Latest application date: 2003-12-09
FCC ID Device Details
| FCC ID | KCHVXU3600 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | KCH |
| Product Code | VXU3600 |
| Applicant Business | Sensus Metering Systems 🇺🇸 |
| Related Domains |  sensus.com |
| Equipment Class | Vehicle Transceiver Unit |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 952-956 MHz | Class II permissive change or modification of presently authorized equipment | 2003-12-09 |
| 952-956 MHz | Original Equipment | 2003-05-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2003-05-13 | PDF 1.3 MB |
| Internal Photos | Internal Photos | 2003-12-09 | PDF 3.3 MB |
| Internal Photos | Internal Photos | 2003-05-13 | PDF 1.5 MB |
| External Photos | External Photos | 2003-05-13 | PDF 233.3 KB |
| FCC Id label format | ID Label/Location Info | 2003-05-13 | PDF 50.5 KB |
| Test Setup Photos | Test Setup Photos | 2003-05-13 | PDF 808.5 KB |
| RX RF conducted test data | Test Report | 2003-12-09 | PDF 1.6 MB |
| TX RF conducted test data | Test Report | 2003-12-09 | PDF 398.1 KB |
| Test Report | Test Report | 2003-05-13 | PDF 1.1 MB |
| Class II permissive cover letter | Cover Letter(s) | 2003-12-09 | PDF 80.6 KB |
| Request for confidentiality letter | Cover Letter(s) | 2003-12-09 | PDF 81.1 KB |
| Request for confidentiality letter | Cover Letter(s) | 2003-05-13 | PDF 83 KB |
| revised confidentiality letter | Cover Letter(s) | 2003-05-13 | PDF 82.7 KB |
| MPE Estimate | RF Exposure Info | 2003-05-13 | PDF 65.1 KB |
| Block Diagram Metadata only | Block Diagram | PDF 39.1 KB | |
| Modified Schematic Diagram Metadata only | Schematics | PDF 2.9 MB | |
| Schematic diagram Metadata only | Schematics | PDF 2.6 MB | |
| Theory of operation Metadata only | Operational Description | PDF 160.8 KB | |
| Theory of operation Metadata only | Operational Description | PDF 126.4 KB | |
| Modified Parts list Metadata only | Parts List/Tune Up Info | PDF 203.3 KB | |
| Parts list Metadata only | Parts List/Tune Up Info | PDF 98.5 KB | |
| Tune up procedure Metadata only | Parts List/Tune Up Info | PDF 281.3 KB |
Application Information
| Application ID | s9GDMhBnIKSdVFRWfgSuRA== |
|---|---|
| Final Action Date | 2003-12-09 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0003180007 |
| Model | VXU3600 |
| Frequency Range | 952-956 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | Vehicle Transceiver Unit |
| Responsible Party | Richard Daniel, Director, Engineering NPI and Project Management, Richard.Daniel@sensus.com , 919-424-8912 |
| Agent | Tom Tom Tom, T.N. Cokenias Consulting, tom@tncokenias.org  , 650-726-1263 |
| TCB Email | mkuo@ccsemc.com  |
| TCB Scope | B4: Microwave, Millimeter Wave Band and Citizens Broadband Radio Services equipment in 47 CFR Parts 25, 30, 74, 90, 95, 96, 97, 101 (all above 3 GHz) |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change filing. Output power listed is ERP. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 53 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| s9GDMhBnIKSdVFRWfgSuRA== | 2003-12-09 | Class II permissive change or modification of presently authorized equipment |
| qb5oy0BbLT1jiUxGFFwGLQ== | 2003-05-13 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application s9GDMhBnIKSdVFRWfgSuRA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 12/09/2003 Application Dated: 12/09/2003 |
| Sensus Metering Systems |
| 8609 Six Forks Road |
| Raleigh, NC 27615 |
| Attention: Richard Daniel , Director, Engineering NPI and Project Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KCHVXU3600 |
| Name of Grantee: | Sensus Metering Systems |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Vehicle Transceiver Unit |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 101 | 952.0 - 956.0 | 13.5 | 1434.5 Hz | 30K6A1D | |
| 101 | 952.0 - 956.0 | 13.5 | 1434.5 Hz | 4K40A1D |
| Class II permissive change filing. Output power listed is ERP. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 53 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application s9GDMhBnIKSdVFRWfgSuRA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sensus Metering Systems 8609 Six Forks Road Raleigh, NC 27615 United States |
Date of Grant: 12/09/2003 Application Dated: 12/09/2003 |
| Attention: Richard Daniel , Director, Engineering NPI and Project Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KCHVXU3600 |
| Name of Grantee: | Sensus Metering Systems |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Vehicle Transceiver Unit |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 101 | 952.0 - 956.0 | 13.5 | 1434.5 Hz | 30K6A1D | |
| 101 | 952.0 - 956.0 | 13.5 | 1434.5 Hz | 4K40A1D |
| Class II permissive change filing. Output power listed is ERP. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 53 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 05/13/2003 Application Dated: 05/13/2003 |
| Sensus Metering Systems |
| 8609 Six Forks Road |
| Raleigh, NC 27615 |
| Attention: Richard Daniel , Director, Engineering NPI and Project Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KCHVXU3600 |
| Name of Grantee: | Sensus Metering Systems |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Vehicle Transceiver Unit |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 101 | 952.0 - 956.0 | 13.5 | 1434.5 Hz | 30K6A1D | |
| 101 | 952.0 - 956.0 | 13.5 | 1434.5 Hz | 4K40A1D |
| Output power listed is ERP. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 53 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application qb5oy0BbLT1jiUxGFFwGLQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sensus Metering Systems 8609 Six Forks Road Raleigh, NC 27615 United States |
Date of Grant: 05/13/2003 Application Dated: 05/13/2003 |
| Attention: Richard Daniel , Director, Engineering NPI and Project Management |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KCHVXU3600 |
| Name of Grantee: | Sensus Metering Systems |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Vehicle Transceiver Unit |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 101 | 952.0 - 956.0 | 13.5 | 1434.5 Hz | 30K6A1D | |
| 101 | 952.0 - 956.0 | 13.5 | 1434.5 Hz | 4K40A1D |
| Output power listed is ERP. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 53 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |