FCC ID KDZLXEATH

WLAN a+b+g mini-PCI Module

by Honeywell International, Inc.

Grantee Code: KDZ   Product Code: LXEATH
Latest application date: 2008-09-12

FCC ID Device Details

FCC IDKDZLXEATH
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeKDZ
Product CodeLXEATH
Applicant BusinessHoneywell International, Inc. 🇺🇸
Related Domains honeywell.com
Equipment ClassWLAN a+b+g mini-PCI Module
Test FirmAdvanced Compliance Solutions, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2008-09-12
5180-5320 MHzClass II permissive change or modification of presently authorized equipment2008-09-12
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: NKRCM9 Grant Date: 06/15/20042008-09-10
5150-5350 MHzChange in identification of presently authorized equipment. Original FCC ID: NKRCM9 Grant Date: 06/15/20042008-09-10

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2008-09-12PDF 1.4 MB
Internal PhotosInternal Photos2008-09-12PDF 1.3 MB
External PhotosExternal Photos2008-09-10PDF 71.4 KB
External PhotosExternal Photos2008-09-12PDF 137.8 KB
Label InformationID Label/Location Info2008-09-12PDF 173.6 KB
Label InformationID Label/Location Info2008-09-10PDF 52.2 KB
Agency LetterCover Letter(s)2008-09-12PDF 24.4 KB
Cover LetterCover Letter(s)2008-09-12PDF 19.8 KB
Authorization LetterCover Letter(s)2008-09-10PDF 24.4 KB
Cover LetterCover Letter(s)2008-09-10PDF 24.6 KB
RF ExposureRF Exposure Info2008-09-12PDF 31.8 KB

Application Information

Application IDSXpqUuGix//EXbJ9XONk4g==
Final Action Date2008-09-12
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0017363995
ModelLXEATH
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWLAN a+b+g mini-PCI Module
Responsible PartyMichael Robinson, Product Compliance, michael.robinson3@honeywell.com , 315 554 6000
Test FirmSam Wismer, Advanced Compliance Solutions, Inc., swismer@acstestlab.com , 770-831-8048
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change to add antennas. Power Output listed is Conducted. Modular approval. This device must be installed by the OEM or OEM integrator only. Instructions on installation of this module may not be provided to the end user. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Original grant notes) This class 2 permissive change adds a specific host configuration and allows collocation with Single Modular device FCCID: KDZLXEBLUE, as described and evaluated in this filing.

Applications

Application IDDatePurpose
SXpqUuGix//EXbJ9XONk4g==2008-09-12Class II permissive change or modification of presently authorized equipment
BFk+WWsckD0y2WvomrRG5Q==2008-09-12Class II permissive change or modification of presently authorized equipment
lUpiMieXzDRDqjlr4DMrZA==2008-09-10Change in identification of presently authorized equipment. Original FCC ID: NKRCM9 Grant Date: 06/15/2004
EXYMYpAdsJp0heOAZ66U9Q==2008-09-10Change in identification of presently authorized equipment. Original FCC ID: NKRCM9 Grant Date: 06/15/2004

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.196000015C36, CC
5150-5350 MHz0.06915E36, CC, ND
5180-5320 MHz0.06915E36, CC, ND
5725-5825 MHz0.10115E36, CC, ND
5745-5805 MHz0.10115E36, CC, ND

Grants

TCB Grant - Application SXpqUuGix//EXbJ9XONk4g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 09/12/2008

Application Dated: 09/12/2008
Honeywell International, Inc.
9680 Old Bailes Rd
Fort Mill, SC 29707
 
Attention: Michael Robinson , Product Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KDZLXEATH
Name of Grantee:  Honeywell International, Inc.
Equipment Class: Digital Transmission System
Notes: WLAN a+b+g mini-PCI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC 15C 2412.0  -  2462.0 0.196  

Class II Permissive Change to add antennas. Power Output listed is Conducted. Modular approval. This device must be installed by the OEM or OEM integrator only. Instructions on installation of this module may not be provided to the end user. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Original grant notes) This class 2 permissive change adds a specific host configuration and allows collocation with Single Modular device FCCID: KDZLXEBLUE, as described and evaluated in this filing.

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application SXpqUuGix//EXbJ9XONk4g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Honeywell International, Inc.
9680 Old Bailes Rd
Fort Mill, SC 29707
United States
  Date of Grant: 09/12/2008

Application Dated: 09/12/2008
 
Attention: Michael Robinson , Product Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KDZLXEATH
Name of Grantee:  Honeywell International, Inc.
Equipment Class: Digital Transmission System
Notes: WLAN a+b+g mini-PCI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC 15C 2412.0  -  2462.0 0.196  

Class II Permissive Change to add antennas. Power Output listed is Conducted. Modular approval. This device must be installed by the OEM or OEM integrator only. Instructions on installation of this module may not be provided to the end user. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Original grant notes) This class 2 permissive change adds a specific host configuration and allows collocation with Single Modular device FCCID: KDZLXEBLUE, as described and evaluated in this filing.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application lUpiMieXzDRDqjlr4DMrZA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 09/10/2008

Application Dated: 09/10/2008
Honeywell International, Inc.
9680 Old Bailes Rd
Fort Mill, SC 29707
 
Attention: Michael Robinson , Product Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KDZLXEATH
Name of Grantee:  Honeywell International, Inc.
Equipment Class: Digital Transmission System
Notes: WLAN a+b+g mini-PCI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC 15C 2412.0  -  2462.0 0.196  

Class II Permissive Change to add antennas. Power Output listed is Conducted. Modular approval. This device must be installed by the OEM or OEM integrator only. Instructions on installation of this module may not be provided to the end user. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Single Modular

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application lUpiMieXzDRDqjlr4DMrZA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Honeywell International, Inc.
9680 Old Bailes Rd
Fort Mill, SC 29707
United States
  Date of Grant: 09/10/2008

Application Dated: 09/10/2008
 
Attention: Michael Robinson , Product Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KDZLXEATH
Name of Grantee:  Honeywell International, Inc.
Equipment Class: Digital Transmission System
Notes: WLAN a+b+g mini-PCI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC 15C 2412.0  -  2462.0 0.196  

Class II Permissive Change to add antennas. Power Output listed is Conducted. Modular approval. This device must be installed by the OEM or OEM integrator only. Instructions on installation of this module may not be provided to the end user. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Single Modular


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application EXYMYpAdsJp0heOAZ66U9Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 09/10/2008

Application Dated: 09/10/2008
Honeywell International, Inc.
9680 Old Bailes Rd
Fort Mill, SC 29707
 
Attention: Michael Robinson , Product Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KDZLXEATH
Name of Grantee:  Honeywell International, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wlan 802.11a+b+g mini-PCI module (RoHS version)
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC ND 15E 5150.0  -  5350.0 0.069  
36 CC ND 15E 5725.0  -  5825.0 0.101  

Class II Permissive Change filing to add DFS to 5.25 to 5.35GHz band. Power output listed is conducted. Modular approval. This device must be installed by the OEM or OEM integrator only. Instructions on installation of this module may not be provided to the end user. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device in the 5.15 to 5.25GHz band is restricted to indoor use only. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection
Single Modular

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application EXYMYpAdsJp0heOAZ66U9Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Honeywell International, Inc.
9680 Old Bailes Rd
Fort Mill, SC 29707
United States
  Date of Grant: 09/10/2008

Application Dated: 09/10/2008
 
Attention: Michael Robinson , Product Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KDZLXEATH
Name of Grantee:  Honeywell International, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wlan 802.11a+b+g mini-PCI module (RoHS version)
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC ND 15E 5150.0  -  5350.0 0.069  
36 CC ND 15E 5725.0  -  5825.0 0.101  

Class II Permissive Change filing to add DFS to 5.25 to 5.35GHz band. Power output listed is conducted. Modular approval. This device must be installed by the OEM or OEM integrator only. Instructions on installation of this module may not be provided to the end user. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device in the 5.15 to 5.25GHz band is restricted to indoor use only. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection

Single Modular


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application BFk+WWsckD0y2WvomrRG5Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 09/12/2008

Application Dated: 09/12/2008
Honeywell International, Inc.
9680 Old Bailes Rd
Fort Mill, SC 29707
 
Attention: Michael Robinson , Product Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KDZLXEATH
Name of Grantee:  Honeywell International, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN 802.11
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC ND 15E 5180.0  -  5320.0 0.069  
36 CC ND 15E 5745.0  -  5805.0 0.101  

Class II Permissive Change filing to add DFS to 5.25 to 5.35GHz band. Power output listed is conducted. Modular approval. This device must be installed by the OEM or OEM integrator only. Instructions on installation of this module may not be provided to the end user. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device in the 5.15 to 5.25GHz band is restricted to indoor use only. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. (Original grant notes) This class 2 permissive change adds a specific host configuration and allows collocation with Single Modular device FCCID: KDZLXEBLUE, as described and evaluated in this filing.
Single Modular

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application BFk+WWsckD0y2WvomrRG5Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Honeywell International, Inc.
9680 Old Bailes Rd
Fort Mill, SC 29707
United States
  Date of Grant: 09/12/2008

Application Dated: 09/12/2008
 
Attention: Michael Robinson , Product Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KDZLXEATH
Name of Grantee:  Honeywell International, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN 802.11
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC ND 15E 5180.0  -  5320.0 0.069  
36 CC ND 15E 5745.0  -  5805.0 0.101  

Class II Permissive Change filing to add DFS to 5.25 to 5.35GHz band. Power output listed is conducted. Modular approval. This device must be installed by the OEM or OEM integrator only. Instructions on installation of this module may not be provided to the end user. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device in the 5.15 to 5.25GHz band is restricted to indoor use only. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. (Original grant notes) This class 2 permissive change adds a specific host configuration and allows collocation with Single Modular device FCCID: KDZLXEBLUE, as described and evaluated in this filing.

Single Modular


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: