FCC ID KDZVM2W01

Vehicle Mount Terminal

by Honeywell International, Inc.

Grantee Code: KDZ   Product Code: VM2W01
Latest application date: 2016-06-22

FCC ID Device Details

FCC IDKDZVM2W01
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeKDZ
Product CodeVM2W01
Applicant BusinessHoneywell International, Inc. 🇺🇸
Related Domains honeywell.com
Equipment ClassVehicle Mount Terminal
Test FirmSGS Taiwan Ltd. Electronics & Communication Lab

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2016-06-22
2402-2480 MHzOriginal Equipment2013-04-18
2412-2462 MHzOriginal Equipment2013-04-18
5180-5240 MHzOriginal Equipment2013-04-18

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2016-06-22PDF 1.2 MB
User ManualUsers Manual2013-04-18PDF 1.2 MB
Internal PhotosInternal Photos2016-06-22PDF 842.4 KB
Internal PhotoInternal Photos2013-04-18PDF 3.6 MB
External PhotosExternal Photos2016-06-22PDF 253.8 KB
External PhotoExternal Photos2013-04-18PDF 745.9 KB
labelID Label/Location Info2013-04-18PDF 139.9 KB
Test Setup PhotosTest Setup Photos2016-06-22PDF 365.9 KB
Set Up PhotoTest Setup Photos2013-04-18PDF 839.9 KB
Set Up PhotoTest Setup Photos2013-04-18PDF 1.5 MB
set up photoTest Setup Photos2013-04-18PDF 416.9 KB
Test ReportTest Report2016-06-22PDF 3 MB
Antenna Test ReportTest Report2013-04-18PDF 2.9 MB
Antenna Test_ReportTest Report2013-04-18PDF 3.7 MB
Antenna_Test_ReportTest Report2013-04-18PDF 3.6 MB
BT_Antenna_Test_ReportTest Report2013-04-18PDF 3.7 MB
Test ReportTest Report2013-04-18PDF 3.2 MB
Test reportTest Report2013-04-18PDF 1.1 MB
UNII Test Report ver01Test Report2013-04-18PDF 4.2 MB
Attestation LetterCover Letter(s)2013-04-18PDF 28.7 KB
Authorization letterCover Letter(s)2016-06-22PDF 37.5 KB
Class II permissive change letterCover Letter(s)2016-06-22PDF 130.1 KB
ConfidentialityCover Letter(s)2016-06-22PDF 90.2 KB
Declaration of authorizationCover Letter(s)2016-06-22PDF 91.4 KB
Declaration Letter-antennaCover Letter(s)2013-04-18PDF 66.4 KB
Declaration Letter_BluetoothCover Letter(s)2013-04-18PDF 26.8 KB
Declaration Letter_WLANCover Letter(s)2013-04-18PDF 78.8 KB
Declaration of authorizationCover Letter(s)2013-04-18PDF 84.1 KB
DoCCover Letter(s)2013-04-18PDF 77.1 KB
Request for LT or STC confidentialityCover Letter(s)2013-04-18PDF 83 KB
MPERF Exposure Info2016-06-22PDF 46.5 KB
MPERF Exposure Info2013-04-18PDF 182.8 KB
MPERF Exposure Info2013-04-18PDF 260.2 KB
MPE ver01RF Exposure Info2013-04-18PDF 305.6 KB
MPE ver02RF Exposure Info2013-04-18PDF 307 KB
Software security for UNII Metadata onlyOperational DescriptionPDF 103.6 KB

Application Information

Application IDw2B+yDtmitWSUBmlBi/NqQ==
Final Action Date2016-06-22
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0017363995
ModelVM2W01
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionVehicle Mount Terminal
Responsible PartyMandana Salahshour, Global Regulatory Compliance Manager, mandana.salahshour@honeywell.com , 8038358190
Technical ContactWillis Chen, SGS Taiwan Ltd., willis.chen@sgs.com , 886222993279
Non-Technical ContactVenkat Dronamraju, Honeywell International Inc., venkat.dronamraju@Honeywell.com , 803-835-8220
Test FirmRyan WANG, SGS Taiwan Ltd. Electronics & Communication Lab, ryan-ec.wang@sgs.com , +886-2-2299-3279
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change : This change is to to accommodate with the new U-NII rules. Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth mode. Operations in 5150-5250 MHz band is for indoor use only.

Applications

Application IDDatePurpose
w2B+yDtmitWSUBmlBi/NqQ==2016-06-22Class II permissive change or modification of presently authorized equipment
f+3cah3fQEc5CkvMUI2fhA==2013-04-18Original Equipment
KRl59AoPPY1d4W7cMRcfyA==2013-04-18Original Equipment
78VsESiVgqOKCwW5mnQC0Q==2013-04-18Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.002400015CCC
2412-2462 MHz0.06515CCC, MO
5180-5240 MHz0.01515E38, CC, MO
5180-5240 MHz0.01515ECC, MO
5260-5320 MHz0.03415E38, CC, MO, ND
5260-5320 MHz0.03415ECC, MO, ND
5500-5700 MHz0.0215E38, CC, MO, ND
5500-5700 MHz0.0215ECC, MO, ND
5745-5825 MHz0.05115CCC, MO
5745-5825 MHz0.02315E38, CC, MO

Grants

TCB Grant - Application w2B+yDtmitWSUBmlBi/NqQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 06/22/2016

Application Dated: 06/04/2016
Honeywell International, Inc.
9680 Old Bailes Rd
Fort Mill, SC 29707
 
Attention: Mandana Salahshour , Global Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KDZVM2W01
Name of Grantee:  Honeywell International, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Vehicle Mount Terminal
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.015  
38 CC MO ND 15E 5260.0  -  5320.0 0.034  
38 CC MO ND 15E 5500.0  -  5700.0 0.02  
38 CC MO 15E 5745.0  -  5825.0 0.023  

Class II Permissive Change : This change is to to accommodate with the new U-NII rules.

Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth mode. Operations in 5150-5250 MHz band is for indoor use only.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application w2B+yDtmitWSUBmlBi/NqQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Honeywell International, Inc.
9680 Old Bailes Rd
Fort Mill, SC 29707
United States
  Date of Grant: 06/22/2016

Application Dated: 06/04/2016
 
Attention: Mandana Salahshour , Global Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KDZVM2W01
Name of Grantee:  Honeywell International, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Vehicle Mount Terminal
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.015  
38 CC MO ND 15E 5260.0  -  5320.0 0.034  
38 CC MO ND 15E 5500.0  -  5700.0 0.02  
38 CC MO 15E 5745.0  -  5825.0 0.023  

Class II Permissive Change : This change is to to accommodate with the new U-NII rules.

Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth mode. Operations in 5150-5250 MHz band is for indoor use only.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application KRl59AoPPY1d4W7cMRcfyA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Edisonstraat 12a
Zevenaar, NL-6902 PK
Netherlands
Date of Grant: 04/18/2013

Application Dated: 04/17/2013
Honeywell International, Inc.
9680 Old Bailes Rd
Fort Mill, SC 29707
 
Attention: Michael Robinson , Product Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KDZVM2W01
Name of Grantee:  Honeywell International, Inc.
Equipment Class: Digital Transmission System
Notes: Vehicle Mount Terminal
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.065  
CC MO 15C 5745.0  -  5825.0 0.051  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20/40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application KRl59AoPPY1d4W7cMRcfyA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Honeywell International, Inc.
9680 Old Bailes Rd
Fort Mill, SC 29707
United States
  Date of Grant: 04/18/2013

Application Dated: 04/17/2013
 
Attention: Michael Robinson , Product Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KDZVM2W01
Name of Grantee:  Honeywell International, Inc.
Equipment Class: Digital Transmission System
Notes: Vehicle Mount Terminal
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.065  
CC MO 15C 5745.0  -  5825.0 0.051  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application f+3cah3fQEc5CkvMUI2fhA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Edisonstraat 12a
Zevenaar, NL-6902 PK
Netherlands
Date of Grant: 04/18/2013

Application Dated: 04/17/2013
Honeywell International, Inc.
9680 Old Bailes Rd
Fort Mill, SC 29707
 
Attention: Michael Robinson , Product Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KDZVM2W01
Name of Grantee:  Honeywell International, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Vehicle Mount Terminal
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0024  

Power output listed is conducted.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application f+3cah3fQEc5CkvMUI2fhA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Honeywell International, Inc.
9680 Old Bailes Rd
Fort Mill, SC 29707
United States
  Date of Grant: 04/18/2013

Application Dated: 04/17/2013
 
Attention: Michael Robinson , Product Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KDZVM2W01
Name of Grantee:  Honeywell International, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Vehicle Mount Terminal
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0024  

Power output listed is conducted.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 78VsESiVgqOKCwW5mnQC0Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Edisonstraat 12a
Zevenaar, NL-6902 PK
Netherlands
Date of Grant: 04/18/2013

Application Dated: 04/17/2013
Honeywell International, Inc.
9680 Old Bailes Rd
Fort Mill, SC 29707
 
Attention: Michael Robinson , Product Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KDZVM2W01
Name of Grantee:  Honeywell International, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Vehicle Mount Terminal
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.015  
CC MO ND 15E 5260.0  -  5320.0 0.034  
CC MO ND 15E 5500.0  -  5700.0 0.02  

Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth mode. Operations in 5150-5250 MHz band is for indoor use only.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application 78VsESiVgqOKCwW5mnQC0Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Honeywell International, Inc.
9680 Old Bailes Rd
Fort Mill, SC 29707
United States
  Date of Grant: 04/18/2013

Application Dated: 04/17/2013
 
Attention: Michael Robinson , Product Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KDZVM2W01
Name of Grantee:  Honeywell International, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Vehicle Mount Terminal
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.015  
CC MO ND 15E 5260.0  -  5320.0 0.034  
CC MO ND 15E 5500.0  -  5700.0 0.02  

Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth mode. Operations in 5150-5250 MHz band is for indoor use only.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: