FCC ID KNYASM1101CR
802.11bgn PCIe Module
by FreeWave Technologies Inc.
Grantee Code: KNY Product Code: ASM1101CR
Latest application date: 2014-09-24
FCC ID Device Details
| FCC ID | KNYASM1101CR |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | KNY |
| Product Code | ASM1101CR |
| Applicant Business | FreeWave Technologies Inc. 🇺🇸 |
| Related Domains |  freewave.com |
| Equipment Class | 802.11bgn PCIe Module |
| Test Firm | Northwest EMC, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2403-2470 MHz | Class II permissive change or modification of presently authorized equipment | 2014-09-24 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2014-05-16 |
| 2412-2462 MHz | Original Equipment | 2013-09-18 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2014-09-24 | PDF 1 MB |
| User manual | Users Manual | 2014-05-16 | PDF 416.4 KB |
| user manual | Users Manual | 2014-03-17 | PDF 202.5 KB |
| int photos | Internal Photos | 2014-03-17 | PDF 438.7 KB |
| ext photos | External Photos | 2014-03-17 | PDF 1.7 MB |
| label | ID Label/Location Info | 2013-09-18 | PDF 90.1 KB |
| Test Setup Photos | Test Setup Photos | 2014-09-24 | PDF 327.9 KB |
| Test set up photos_dish ant | Test Setup Photos | 2014-05-16 | PDF 573.2 KB |
| Test set up photos_panel ant | Test Setup Photos | 2014-05-16 | PDF 105.1 KB |
| Test set up photos_sector ant | Test Setup Photos | 2014-05-16 | PDF 128.2 KB |
| test setup photos | Test Setup Photos | 2014-03-17 | PDF 2.8 MB |
| Test Report | Test Report | 2014-09-24 | PDF 4.2 MB |
| Test report_dish ant | Test Report | 2014-05-16 | PDF 1.2 MB |
| Test report_panel ant | Test Report | 2014-05-16 | PDF 1.4 MB |
| Test report_sector ant | Test Report | 2014-05-16 | PDF 1.4 MB |
| Test Report II | Test Report | 2013-09-18 | PDF 2.5 MB |
| Test Report III | Test Report | 2013-09-18 | PDF 4 MB |
| Test Report IV | Test Report | 2013-09-18 | PDF 2.1 MB |
| Test Report V | Test Report | 2013-09-18 | PDF 2.5 MB |
| Test report I | Test Report | 2013-09-18 | PDF 3.5 MB |
| Compliance Opinion | Cover Letter(s) | 2014-09-24 | PDF 20.4 KB |
| Cover letter | Cover Letter(s) | 2014-09-24 | PDF 225.1 KB |
| Class 2 PC cover letter | Cover Letter(s) | 2014-05-16 | PDF 60.8 KB |
| FCC Letter-of-agency | Cover Letter(s) | 2014-05-16 | PDF 423.8 KB |
| Ad hoc mode letter | Cover Letter(s) | 2013-09-18 | PDF 17.5 KB |
| LTC request | Cover Letter(s) | 2013-09-18 | PDF 31.1 KB |
| PoA | Cover Letter(s) | 2013-09-18 | PDF 26.9 KB |
| Prof. Installation | Cover Letter(s) | 2013-09-18 | PDF 20.6 KB |
| modular approval letter | Cover Letter(s) | 2013-09-18 | PDF 132.5 KB |
| RF exposure_dish ant | RF Exposure Info | 2014-05-16 | PDF 50 KB |
| RF exposure_panel ant | RF Exposure Info | 2014-05-16 | PDF 50 KB |
| RF exposure_sector ant | RF Exposure Info | 2014-05-16 | PDF 50.1 KB |
| MPE | RF Exposure Info | 2013-09-18 | PDF 128.1 KB |
Application Information
| Application ID | CKga32A/oaMSpsjFLLNejg== |
|---|---|
| Final Action Date | 2014-09-24 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0024140386 |
| Model | ASM1101CR |
| Frequency Range | 2403-2470 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11bgn PCIe Module |
| Responsible Party | Michael Drake, Director of Engineering, mdrake@freewave.com , 303-381-9243 |
| Test Firm | Greg Kiemel, Northwest EMC, Inc., gkiemel@nwemc.com  , 503-844-4066 |
| TCB Email | dghizzone@nwemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output Power listed is the maximum combined conducted per original certification. For antennas with more than 6 dBi gain the output power must be decreased according to the Rule Part 15.247. This modular device approved for use in products which operate in fixed or mobile RF exposure configurations with respect to Rule Part 2.1091. This device and its antenna must operate with a separation distance from all persons as documented in previous filings under this ID and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas must be professionally installed. Class II Permissive Change to add new channel bandwidths |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| CKga32A/oaMSpsjFLLNejg== | 2014-09-24 | Class II permissive change or modification of presently authorized equipment |
| 5JX3Xdm6Z8Etw6casilEFw== | 2014-05-16 | Class II permissive change or modification of presently authorized equipment |
| +CPwxACGxFIZL2UzhdB+Yw== | 2013-09-18 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application CKga32A/oaMSpsjFLLNejg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 09/24/2014 Application Dated: 09/24/2014 |
| FreeWave Technologies Inc. |
| 5395 Pearl Parkway |
| Suite 100 |
| Boulder, CO 80301 |
| Attention: Michael Drake , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KNYASM1101CR |
| Name of Grantee: | FreeWave Technologies Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11bgn PCIe Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 MO | 15C | 2412.0 - 2462.0 | 0.611 | ||
| 36 MO | 15C | 2422.0 - 2452.0 | 0.079 | ||
| 36 MO | 15C | 2403.0 - 2470.0 | 0.611 | ||
| 36 MO | 15C | 2406.0 - 2466.0 | 0.582 | ||
| 36 MO | 15C | 2409.0 - 2464.0 | 0.587 |
| Output Power listed is the maximum combined conducted per original certification. For antennas with more than 6 dBi gain the output power must be decreased according to the Rule Part 15.247. This modular device approved for use in products which operate in fixed or mobile RF exposure configurations with respect to Rule Part 2.1091. This device and its antenna must operate with a separation distance from all persons as documented in previous filings under this ID and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas must be professionally installed. Class II Permissive Change to add new channel bandwidths |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application CKga32A/oaMSpsjFLLNejg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
FreeWave Technologies Inc. 5395 Pearl Parkway Suite 100 Boulder, CO 80301 United States |
Date of Grant: 09/24/2014 Application Dated: 09/24/2014 |
| Attention: Michael Drake , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KNYASM1101CR |
| Name of Grantee: | FreeWave Technologies Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11bgn PCIe Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 MO | 15C | 2412.0 - 2462.0 | 0.611 | ||
| 36 MO | 15C | 2422.0 - 2452.0 | 0.079 | ||
| 36 MO | 15C | 2403.0 - 2470.0 | 0.611 | ||
| 36 MO | 15C | 2406.0 - 2466.0 | 0.582 | ||
| 36 MO | 15C | 2409.0 - 2464.0 | 0.587 |
| Output Power listed is the maximum combined conducted per original certification. For antennas with more than 6 dBi gain the output power must be decreased according to the Rule Part 15.247. This modular device approved for use in products which operate in fixed or mobile RF exposure configurations with respect to Rule Part 2.1091. This device and its antenna must operate with a separation distance from all persons as documented in previous filings under this ID and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas must be professionally installed. Class II Permissive Change to add new channel bandwidths |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719 |
Date of Grant: 05/16/2014 Application Dated: 05/15/2014 |
| FreeWave Technologies Inc. |
| 5395 Pearl Parkway |
| Suite 100 |
| Boulder, CO 80301 |
| Attention: Michael Drake , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KNYASM1101CR |
| Name of Grantee: | FreeWave Technologies Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11bgn PCIe Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 MO | 15C | 2412.0 - 2462.0 | 0.611 | ||
| 36 MO | 15C | 2422.0 - 2452.0 | 0.079 |
| This is Class 2 Permissive Change to add specific antennas for use with this module as documented in this filing. Output Power listed is the maximum combined conducted per original certification. For antennas with more than 6 dBi gain the output power must be decreased according to the Rule Part 15.247. This modular device approved for use in products which operate in fixed or mobile RF exposure configurations with respect to Rule Part 2.1091. This device and its antenna must operate with a separation distance from all persons as documented in this filing and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas must be professionally installed. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 5JX3Xdm6Z8Etw6casilEFw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
FreeWave Technologies Inc. 5395 Pearl Parkway Suite 100 Boulder, CO 80301 United States |
Date of Grant: 05/16/2014 Application Dated: 05/15/2014 |
| Attention: Michael Drake , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KNYASM1101CR |
| Name of Grantee: | FreeWave Technologies Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11bgn PCIe Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 MO | 15C | 2412.0 - 2462.0 | 0.611 | ||
| 36 MO | 15C | 2422.0 - 2452.0 | 0.079 |
| This is Class 2 Permissive Change to add specific antennas for use with this module as documented in this filing. Output Power listed is the maximum combined conducted per original certification. For antennas with more than 6 dBi gain the output power must be decreased according to the Rule Part 15.247. This modular device approved for use in products which operate in fixed or mobile RF exposure configurations with respect to Rule Part 2.1091. This device and its antenna must operate with a separation distance from all persons as documented in this filing and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas must be professionally installed. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 09/18/2013 Application Dated: 09/18/2013 |
| FreeWave Technologies Inc. |
| 5395 Pearl Parkway |
| Suite 100 |
| Boulder, CO 80301 |
| Attention: Dean Busch , Sr. Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KNYASM1101CR |
| Name of Grantee: | FreeWave Technologies Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11bgn PCIe Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 | 15C | 2412.0 - 2462.0 | 0.611 | ||
| 36 | 15C | 2422.0 - 2452.0 | 0.079 |
| Output Power listed is the maximum combined conducted output power as indicated in the filing. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device approved for use in products which operate as a mobile transmitting device with respect to Rule Part 2.1091. This modular device and its antenna must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. Compliance of this module in its final configuration is the responsibility of Grantee. Separate approval is required for portable configurations with respect to Rule Part 2.1093. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
EAS Grant - Application +CPwxACGxFIZL2UzhdB+Yw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
FreeWave Technologies Inc. 5395 Pearl Parkway Suite 100 Boulder, CO 80301 United States |
Date of Grant: 09/18/2013 Application Dated: 09/18/2013 |
| Attention: Dean Busch , Sr. Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KNYASM1101CR |
| Name of Grantee: | FreeWave Technologies Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11bgn PCIe Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 | 15C | 2412.0 - 2462.0 | 0.611 | ||
| 36 | 15C | 2422.0 - 2452.0 | 0.079 |
| Output Power listed is the maximum combined conducted output power as indicated in the filing. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device approved for use in products which operate as a mobile transmitting device with respect to Rule Part 2.1091. This modular device and its antenna must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. Compliance of this module in its final configuration is the responsibility of Grantee. Separate approval is required for portable configurations with respect to Rule Part 2.1093. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| Mail To: |