FCC ID KNYLRS455A

435-470 MHz Licensed Band Transceiver

by FreeWave Technologies Inc.

Grantee Code: KNY   Product Code: LRS455A
Latest application date: 2022-02-04

FCC ID Device Details

FCC IDKNYLRS455A
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeKNY
Product CodeLRS455A
Applicant BusinessFreeWave Technologies Inc. 🇺🇸
Related Domains freewave.com
Equipment Class435-470 MHz Licensed Band Transceiver
Test FirmNational Technical Systems

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
435-470 MHzClass II permissive change or modification of presently authorized equipment2022-02-04
435-470 MHzOriginal Equipment2020-08-05

Exhibits

DocumentTypeAvailableFile
Users manualUsers Manual2021-01-31PDF 1.6 MB
Internal photos 01Internal Photos2022-02-04PDF 4.3 MB
Internal photosInternal Photos2021-01-31PDF 1.4 MB
External photos 01External Photos2022-02-04PDF 3.9 MB
External photos 02External Photos2022-02-04PDF 3.7 MB
External photosExternal Photos2021-01-31PDF 600 KB
Label locationID Label/Location Info2020-08-05PDF 1.2 MB
Test setup photosTest Setup Photos2022-02-04PDF 586.6 KB
Test Setup PhotosTest Setup Photos2021-01-31PDF 518.8 KB
Test reportTest Report2022-02-04PDF 1.2 MB
Test ReportTest Report2020-08-05PDF 843.6 KB
Agent authorizationCover Letter(s)2022-02-04PDF 352.8 KB
C2PC requestCover Letter(s)2022-02-04PDF 430.9 KB
Confidentiality requestCover Letter(s)2022-02-04PDF 544.9 KB
Cover LetterCover Letter(s)2022-02-04PDF 134.5 KB
Agent AuthorizationCover Letter(s)2020-08-05PDF 331.7 KB
Confidentiality LetterCover Letter(s)2020-08-05PDF 548.8 KB
Cover LetterCover Letter(s)2020-08-05PDF 26.8 KB
Extended Frequency LetterCover Letter(s)2020-08-05PDF 332.2 KB
Modular approval requestCover Letter(s)2020-08-05PDF 683.2 KB
RF ExposureRF Exposure Info2022-02-04PDF 52.9 KB
RF Exposure CalculationRF Exposure Info2020-08-05PDF 52.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 458 KB
Schematics Metadata onlySchematicsPDF 395.5 KB
Operational Description Metadata onlyOperational DescriptionPDF 11 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 53 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 59.6 KB
Tune Up Information Metadata onlyParts List/Tune Up InfoPDF 56.1 KB

Application Information

Application ID//N6LXs2Ob2jm7SIvILK4A==
Final Action Date2022-02-04
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0024140386
ModelLRS455A
Frequency Range435-470 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device Description435-470 MHz Licensed Band Transceiver
Responsible PartyMichael Drake, Director of Engineering, mdrake@freewave.com , 303-381-9243
AgentDavid David David, National Technical Systems - Silicon Valley, svdoc@nts.com , 5105783500
Technical ContactDavid Bare, National Technical Systems, svdoc@nts.com , 510 578 3500
Test FirmDavid Bare, National Technical Systems, david.bare@nts.com , 510-578-3500
TCB Emailsvdoc@nts.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change. Limited single modular approval. This device must be installed professionally and are only approved for use when installed in devices produced by the manufacturer or third-party OEMs with the express written approval of the manufacturer. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 95 cm from all persons during normal operation. The antenna used for this transmitter must not exceed 9.25 dBi. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of 1.1307(b)(3), for satisfying RF exposure compliance

Applications

Application IDDatePurpose
//N6LXs2Ob2jm7SIvILK4A==2022-02-04Class II permissive change or modification of presently authorized equipment
71f2e8GcATGKQyZxWTY5gA==2020-08-05Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
435-470 MHz21.1ppm7K74F1D90.21EF, ES
435-470 MHz20.6ppm7K64F1D90.21EF, ES
435-470 MHz21.1ppm8K85F1D90.21EF, ES
435-470 MHz20.6ppm8K89F1D90.21EF, ES

Grants

TCB Grant - Application 71f2e8GcATGKQyZxWTY5gA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  National Technical Systems
41039 Boyce Road
Fremont, CA 94538
Date of Grant: 08/05/2020

Application Dated: 08/05/2020
FreeWave Technologies Inc.
5395 Pearl Parkway
Suite 100
Boulder, CO 80301
 
Attention: Michael Drake , Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KNYLRS455A
Name of Grantee:  FreeWave Technologies Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: 435-470 MHz Licensed Band Transceiver,
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF ES 90.210 435.0  -  470.0 2.0 0.6  PM 7K64F1D
EF ES 90.210 435.0  -  470.0 2.0 0.6  PM 8K89F1D

Limited single modular approval. This device must be installed professionally and are only approved for use when installed in devices produced by the manufacturer or third-party OEMs with the express written approval of the manufacturer. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 95 cm from all persons during normal operation. The antenna used for this transmitter must not exceed 9.25 dBi. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of 1.1307(b)(3), for satisfying RF exposure compliance

EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES: This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

EAS Grant - Application 71f2e8GcATGKQyZxWTY5gA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

FreeWave Technologies Inc.
5395 Pearl Parkway Suite 100
Boulder, CO 80301
United States
  Date of Grant: 08/05/2020

Application Dated: 08/05/2020
 
Attention: Michael Drake , Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KNYLRS455A
Name of Grantee:  FreeWave Technologies Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: 435-470 MHz Licensed Band Transceiver,
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF ES 90.210 435.0  -  470.0 2.0 0.6  PM 7K64F1D
EF ES 90.210 435.0  -  470.0 2.0 0.6  PM 8K89F1D

Limited single modular approval. This device must be installed professionally and are only approved for use when installed in devices produced by the manufacturer or third-party OEMs with the express written approval of the manufacturer. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 95 cm from all persons during normal operation. The antenna used for this transmitter must not exceed 9.25 dBi. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of 1.1307(b)(3), for satisfying RF exposure compliance


EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES: This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

TCB Grant - Application //N6LXs2Ob2jm7SIvILK4A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  National Technical Systems
41039 Boyce Road
Fremont, CA 94538
Date of Grant: 02/04/2022

Application Dated: 02/04/2022
FreeWave Technologies Inc.
5395 Pearl Parkway
Suite 100
Boulder, CO 80301
 
Attention: Michael Drake , Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KNYLRS455A
Name of Grantee:  FreeWave Technologies Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: 435-470 MHz Licensed Band Transceiver
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF ES 90.210 435.0  -  470.0 2.0 1.1  PM 7K74F1D
EF ES 90.210 435.0  -  470.0 2.0 1.1  PM 8K85F1D

Class II Permissive Change. Limited single modular approval. This device must be installed professionally and are only approved for use when installed in devices produced by the manufacturer or third-party OEMs with the express written approval of the manufacturer. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 95 cm from all persons during normal operation. The antenna used for this transmitter must not exceed 9.25 dBi. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of 1.1307(b)(3), for satisfying RF exposure compliance

EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES: This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

EAS Grant - Application //N6LXs2Ob2jm7SIvILK4A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

FreeWave Technologies Inc.
5395 Pearl Parkway Suite 100
Boulder, CO 80301
United States
  Date of Grant: 02/04/2022

Application Dated: 02/04/2022
 
Attention: Michael Drake , Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KNYLRS455A
Name of Grantee:  FreeWave Technologies Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: 435-470 MHz Licensed Band Transceiver
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF ES 90.210 435.0  -  470.0 2.0 1.1  PM 7K74F1D
EF ES 90.210 435.0  -  470.0 2.0 1.1  PM 8K85F1D

Class II Permissive Change. Limited single modular approval. This device must be installed professionally and are only approved for use when installed in devices produced by the manufacturer or third-party OEMs with the express written approval of the manufacturer. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 95 cm from all persons during normal operation. The antenna used for this transmitter must not exceed 9.25 dBi. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of 1.1307(b)(3), for satisfying RF exposure compliance


EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES: This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

Mail To: