FCC ID KNYPMT0101AB
ZumLink 900 Series
by FreeWave Technologies Inc.
Grantee Code: KNY Product Code: PMT0101AB
Latest application date: 2017-09-26
Device Images
FCC ID Device Details
| FCC ID | KNYPMT0101AB |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | KNY |
| Product Code | PMT0101AB |
| Applicant Business | FreeWave Technologies Inc. 🇺🇸 |
| Related Domains |  freewave.com |
| Equipment Class | ZumLink 900 Series |
| Test Firm | Compliance Testing, LLC |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.477-927.821 MHz | Class II permissive change or modification of presently authorized equipment | 2017-09-26 |
| 902.707-927.36 MHz | Class II permissive change or modification of presently authorized equipment | 2017-09-26 |
| 902.477-927.821 MHz | Original Equipment | 2016-06-30 |
| 902.707-927.36 MHz | Original Equipment | 2016-06-30 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2016-08-14 | PDF 855.3 KB |
| Updated User Manual | Users Manual | 2016-06-30 | PDF 2.7 MB |
| Internal Photos | Internal Photos | 2016-08-14 | PDF 184.6 KB |
| Internal Photos Revision Letter | Cover Letter(s) | 2016-06-30 | PDF 688.4 KB |
| External Photos | External Photos | 2016-08-14 | PDF 660.5 KB |
| Label and Location | ID Label/Location Info | 2016-06-30 | PDF 149.3 KB |
| Test Setup Photos | Test Setup Photos | 2016-08-14 | PDF 306.6 KB |
| Test Setup Photos | Test Setup Photos | 2016-08-14 | PDF 305.6 KB |
| Annex A_Part 15.247 | Test Report | 2017-09-26 | PDF 225.4 KB |
| Annex B_Part 15.247 | Test Report | 2017-09-26 | PDF 207 KB |
| FCC Part 15.247 DTS | Test Report | 2017-09-26 | PDF 602.6 KB |
| FCC Part 15.247 FHSS | Test Report | 2017-09-26 | PDF 589.2 KB |
| FCC Part 15.247 Test Report | Test Report | 2017-09-26 | PDF 425.3 KB |
| FCC Part 15.247 Test Report | Test Report | 2017-09-26 | PDF 491.5 KB |
| Corrected FCC Part 15.247 DTS | Test Report | 2016-06-30 | PDF 602.6 KB |
| Corrected FCC Part 15.247 FHSS | Test Report | 2016-06-30 | PDF 589.2 KB |
| DTS report1 | Test Report | 2016-06-30 | PDF 596.6 KB |
| DTS report2 | Test Report | 2016-06-30 | PDF 380.4 KB |
| DTS report3 | Test Report | 2016-06-30 | PDF 142.4 KB |
| DTS report4 | Test Report | 2016-06-30 | PDF 336.7 KB |
| DTS report5 | Test Report | 2016-06-30 | PDF 216.6 KB |
| DTS report6 | Test Report | 2016-06-30 | PDF 105.5 KB |
| FHSS test report1 | Test Report | 2016-06-30 | PDF 597.8 KB |
| FHSS test report2 | Test Report | 2016-06-30 | PDF 305.7 KB |
| FHSS test report3 | Test Report | 2016-06-30 | PDF 195.4 KB |
| FHSS test report4 | Test Report | 2016-06-30 | PDF 299.1 KB |
| FHSS test report5 | Test Report | 2016-06-30 | PDF 179.3 KB |
| FHSS test report6 | Test Report | 2016-06-30 | PDF 182.6 KB |
| FHSS test report7 | Test Report | 2016-06-30 | PDF 113 KB |
| C2PC Letter | Cover Letter(s) | 2017-09-26 | PDF 43.2 KB |
| Agent Auth | Cover Letter(s) | 2016-06-30 | PDF 103.5 KB |
| Antenna Data | Cover Letter(s) | 2016-06-30 | PDF 246.4 KB |
| Board Differences Letter | Cover Letter(s) | 2016-06-30 | PDF 516.2 KB |
| Long Term Confidentiality | Cover Letter(s) | 2016-06-30 | PDF 95.4 KB |
| Module Approval | Cover Letter(s) | 2016-06-30 | PDF 94.6 KB |
| Short Term Confidentiality | Cover Letter(s) | 2016-06-30 | PDF 135.6 KB |
| Corrected FCC Part 1.1310 DTS | RF Exposure Info | 2016-06-30 | PDF 290.2 KB |
| Corrected FCC Part 1.1310 FHSS | RF Exposure Info | 2016-06-30 | PDF 289.9 KB |
| FHSS Part 1.1310 | RF Exposure Info | 2016-06-30 | PDF 386.2 KB |
| Part 1.1310 | RF Exposure Info | 2016-06-30 | PDF 388.4 KB |
| Block Diagram Metadata only | Block Diagram | PDF 130.4 KB | |
| Schematics Metadata only | Schematics | PDF 199.6 KB | |
| Theory of Op Metadata only | Operational Description | PDF 94.2 KB | |
| BOM1 Metadata only | Parts List/Tune Up Info | PDF 29.7 KB | |
| BOM2 Metadata only | Parts List/Tune Up Info | PDF 11.4 KB |
Application Information
| Application ID | fHYzvn+qs2Oib3T2y8+ULg== |
|---|---|
| Final Action Date | 2017-09-26 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0024140386 |
| Model | PMT0101AB |
| Frequency Range | 902.477-927.821 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | ZumLink 900 Series |
| Responsible Party | Michael Drake, Director of Engineering, mdrake@freewave.com , 303-381-9243 |
| Agent | Amanda Amanda Amanda, Compliance Testing, LLC, 480-926-3100 |
| Test Firm | Michael Schafer, Compliance Testing, LLC, michaels@compliancetesting.com  , 480-926-3100 |
| TCB Email | amandar@compliancetesting.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | This is a C2PC for the addition of a data rate Power Output listed is conducted. Single Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 22.94 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| fHYzvn+qs2Oib3T2y8+ULg== | 2017-09-26 | Class II permissive change or modification of presently authorized equipment |
| 6Qu1XGBnZKJB2Cgqo9zmrg== | 2017-09-26 | Class II permissive change or modification of presently authorized equipment |
| XarbKxfSYNDwbX3ygd+BXw== | 2016-06-30 | Original Equipment |
| EVJIypK8puz3uw6/RnW3eA== | 2016-06-30 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application XarbKxfSYNDwbX3ygd+BXw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Compliance Testing, LLC 1724 S. Nevada Way Mesa, AZ 85204 |
Date of Grant: 06/30/2016 Application Dated: 06/30/2016 |
| FreeWave Technologies Inc. |
| 5395 Pearl Parkway |
| Suite 100 |
| Boulder, CO 80301 |
| Attention: Michael Drake , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KNYPMT0101AB |
| Name of Grantee: | FreeWave Technologies Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Module/ZumLink Z9-C or Z9-T |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.477 - 927.821 | 0.968 |
| Power Output listed is conducted. Single Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 22.94 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. |
EAS Grant - Application XarbKxfSYNDwbX3ygd+BXw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
FreeWave Technologies Inc. 5395 Pearl Parkway Suite 100 Boulder, CO 80301 United States |
Date of Grant: 06/30/2016 Application Dated: 06/30/2016 |
| Attention: Michael Drake , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KNYPMT0101AB |
| Name of Grantee: | FreeWave Technologies Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Module/ZumLink Z9-C or Z9-T |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.477 - 927.821 | 0.968 |
| Power Output listed is conducted. Single Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 22.94 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Compliance Testing, LLC 1724 S. Nevada Way Mesa, AZ 85204 |
Date of Grant: 09/26/2017 Application Dated: 09/26/2017 |
| FreeWave Technologies Inc. |
| 5395 Pearl Parkway |
| Suite 100 |
| Boulder, CO 80301 |
| Attention: Michael Drake , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KNYPMT0101AB |
| Name of Grantee: | FreeWave Technologies Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | ZumLink 900 Series |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.477 - 927.821 | 0.968 |
| This is a C2PC for the addition of a data rate Power Output listed is conducted. Single Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 22.94 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. |
EAS Grant - Application fHYzvn+qs2Oib3T2y8+ULg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
FreeWave Technologies Inc. 5395 Pearl Parkway Suite 100 Boulder, CO 80301 United States |
Date of Grant: 09/26/2017 Application Dated: 09/26/2017 |
| Attention: Michael Drake , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KNYPMT0101AB |
| Name of Grantee: | FreeWave Technologies Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | ZumLink 900 Series |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.477 - 927.821 | 0.968 |
| This is a C2PC for the addition of a data rate Power Output listed is conducted. Single Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 22.94 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Compliance Testing, LLC 1724 S. Nevada Way Mesa, AZ 85204 |
Date of Grant: 06/30/2016 Application Dated: 06/30/2016 |
| FreeWave Technologies Inc. |
| 5395 Pearl Parkway |
| Suite 100 |
| Boulder, CO 80301 |
| Attention: Michael Drake , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KNYPMT0101AB |
| Name of Grantee: | FreeWave Technologies Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Module/ZumLink Z9-C or Z9-T |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.707 - 927.36 | 0.975 |
| Power Output listed is conducted. Single Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 22.94 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. |
EAS Grant - Application EVJIypK8puz3uw6/RnW3eA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
FreeWave Technologies Inc. 5395 Pearl Parkway Suite 100 Boulder, CO 80301 United States |
Date of Grant: 06/30/2016 Application Dated: 06/30/2016 |
| Attention: Michael Drake , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KNYPMT0101AB |
| Name of Grantee: | FreeWave Technologies Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Module/ZumLink Z9-C or Z9-T |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.707 - 927.36 | 0.975 |
| Power Output listed is conducted. Single Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 22.94 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Compliance Testing, LLC 1724 S. Nevada Way Mesa, AZ 85204 |
Date of Grant: 09/26/2017 Application Dated: 09/26/2017 |
| FreeWave Technologies Inc. |
| 5395 Pearl Parkway |
| Suite 100 |
| Boulder, CO 80301 |
| Attention: Michael Drake , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KNYPMT0101AB |
| Name of Grantee: | FreeWave Technologies Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | ZumLink 900 Series |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.707 - 927.36 | 0.975 |
| This is a C2PC for the addition of a data rate Power Output listed is conducted. Single Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 22.94 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. |
EAS Grant - Application 6Qu1XGBnZKJB2Cgqo9zmrg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
FreeWave Technologies Inc. 5395 Pearl Parkway Suite 100 Boulder, CO 80301 United States |
Date of Grant: 09/26/2017 Application Dated: 09/26/2017 |
| Attention: Michael Drake , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KNYPMT0101AB |
| Name of Grantee: | FreeWave Technologies Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | ZumLink 900 Series |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.707 - 927.36 | 0.975 |
| This is a C2PC for the addition of a data rate Power Output listed is conducted. Single Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 22.94 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. |
| Mail To: |