FCC ID KNYPRW1001ER
mini-PCI radio Module
by FreeWave Technologies Inc.
Grantee Code: KNY Product Code: PRW1001ER
Latest application date: 2014-09-24
FCC ID Device Details
| FCC ID | KNYPRW1001ER |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | KNY |
| Product Code | PRW1001ER |
| Applicant Business | FreeWave Technologies Inc. 🇺🇸 |
| Related Domains |  freewave.com |
| Equipment Class | mini-PCI radio Module |
| Test Firm | Northwest EMC, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 905-925 MHz | Class II permissive change or modification of presently authorized equipment | 2014-09-24 |
| 907-922 MHz | Class II permissive change or modification of presently authorized equipment | 2014-05-28 |
| 907-922 MHz | Original Equipment | 2013-08-20 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2014-09-24 | PDF 1 MB |
| Users manual | Users Manual | 2014-05-28 | PDF 416.4 KB |
| User manual | Users Manual | 2013-08-20 | PDF 432.9 KB |
| Internal Photo | Internal Photos | 2013-08-20 | PDF 453.1 KB |
| External Photo | External Photos | 2013-08-20 | PDF 447 KB |
| Label Location | ID Label/Location Info | 2013-08-20 | PDF 37.8 KB |
| Test Setup Photos | Test Setup Photos | 2014-09-24 | PDF 274.9 KB |
| Test setup photos omni ant | Test Setup Photos | 2014-05-28 | PDF 226.6 KB |
| Test setup photos yagi ant | Test Setup Photos | 2014-05-28 | PDF 508.8 KB |
| Test Setup photo | Test Setup Photos | 2013-08-20 | PDF 300.6 KB |
| Test Report | Test Report | 2014-09-24 | PDF 3.2 MB |
| Test report omni ant | Test Report | 2014-05-28 | PDF 1 MB |
| Test report yagii ant | Test Report | 2014-05-28 | PDF 1.2 MB |
| Test reports | Test Report | 2013-08-20 | PDF 1.2 MB |
| Modular approval request | Attestation Statements | 2014-05-28 | PDF 585.5 KB |
| Compliance Opinion | Cover Letter(s) | 2014-09-24 | PDF 20.3 KB |
| Cover letter | Cover Letter(s) | 2014-09-24 | PDF 225.5 KB |
| Class 2 PC cover letter | Cover Letter(s) | 2014-05-28 | PDF 60.5 KB |
| Letter-of-agency | Cover Letter(s) | 2014-05-28 | PDF 417.2 KB |
| Declaration of authorization | Cover Letter(s) | 2013-08-20 | PDF 163.5 KB |
| Modular Approval Request | Cover Letter(s) | 2013-08-20 | PDF 585.5 KB |
| Request for LT or STC confidentiality (FCC)-1 | Cover Letter(s) | 2013-08-20 | PDF 317.1 KB |
| RF exposure info omni ant | RF Exposure Info | 2014-05-28 | PDF 55.5 KB |
| RF exposure info yagi ant | RF Exposure Info | 2014-05-28 | PDF 55.5 KB |
| RF Exposure Info | RF Exposure Info | 2013-08-20 | PDF 86 KB |
Application Information
| Application ID | mHbgfkh6mX+aCaS2cZW+NA== |
|---|---|
| Final Action Date | 2014-09-24 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0024140386 |
| Model | PRW1001ER |
| Frequency Range | 905-925 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | mini-PCI radio Module |
| Responsible Party | Michael Drake, Director of Engineering, mdrake@freewave.com , 303-381-9243 |
| Test Firm | Greg Kiemel, Northwest EMC, Inc., gkiemel@nwemc.com  , 503-844-4066 |
| TCB Email | dghizzone@nwemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output Power listed is conducted as per original certification. For antennas with more than 6 dBi gain the output power must be decreased according to the Rule Part 15.247. This modular device approved for use in products which operate in fixed or mobile RF exposure configurations with respect to Rule Part 2.1091. This device and its antenna must operate with a separation distance from all persons as documented in previous filings under this ID and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas must be professionally installed. Class II Permissive Change to add new channel bandwidths |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| mHbgfkh6mX+aCaS2cZW+NA== | 2014-09-24 | Class II permissive change or modification of presently authorized equipment |
| 8aeDfg4dpR+PtjubMQigcQ== | 2014-05-28 | Class II permissive change or modification of presently authorized equipment |
| MTJkNvwH4KBUgFMXg4T0Iw== | 2013-08-20 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application MTJkNvwH4KBUgFMXg4T0Iw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Edisonstraat 12a Zevenaar, NL-6902 PK Netherlands |
Date of Grant: 08/20/2013 Application Dated: 08/14/2013 |
| FreeWave Technologies Inc. |
| 5395 Pearl Parkway |
| Suite 100 |
| Boulder, CO 80301 |
| Attention: Dean Busch , Sr. Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KNYPRW1001ER |
| Name of Grantee: | FreeWave Technologies Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | mini-PCI radio Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 907.0 - 922.0 | 0.93 |
| Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 21 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application MTJkNvwH4KBUgFMXg4T0Iw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
FreeWave Technologies Inc. 5395 Pearl Parkway Suite 100 Boulder, CO 80301 United States |
Date of Grant: 08/20/2013 Application Dated: 08/14/2013 |
| Attention: Dean Busch , Sr. Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KNYPRW1001ER |
| Name of Grantee: | FreeWave Technologies Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | mini-PCI radio Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 907.0 - 922.0 | 0.93 |
| Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 21 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 09/24/2014 Application Dated: 09/24/2014 |
| FreeWave Technologies Inc. |
| 5395 Pearl Parkway |
| Suite 100 |
| Boulder, CO 80301 |
| Attention: Michael Drake , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KNYPRW1001ER |
| Name of Grantee: | FreeWave Technologies Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | mini-PCI radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 MO | 15C | 907.0 - 922.0 | 0.93 | ||
| 36 MO | 15C | 905.0 - 925.0 | 0.925 |
| Output Power listed is conducted as per original certification. For antennas with more than 6 dBi gain the output power must be decreased according to the Rule Part 15.247. This modular device approved for use in products which operate in fixed or mobile RF exposure configurations with respect to Rule Part 2.1091. This device and its antenna must operate with a separation distance from all persons as documented in previous filings under this ID and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas must be professionally installed. Class II Permissive Change to add new channel bandwidths |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application mHbgfkh6mX+aCaS2cZW+NA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
FreeWave Technologies Inc. 5395 Pearl Parkway Suite 100 Boulder, CO 80301 United States |
Date of Grant: 09/24/2014 Application Dated: 09/24/2014 |
| Attention: Michael Drake , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KNYPRW1001ER |
| Name of Grantee: | FreeWave Technologies Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | mini-PCI radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 MO | 15C | 907.0 - 922.0 | 0.93 | ||
| 36 MO | 15C | 905.0 - 925.0 | 0.925 |
| Output Power listed is conducted as per original certification. For antennas with more than 6 dBi gain the output power must be decreased according to the Rule Part 15.247. This modular device approved for use in products which operate in fixed or mobile RF exposure configurations with respect to Rule Part 2.1091. This device and its antenna must operate with a separation distance from all persons as documented in previous filings under this ID and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas must be professionally installed. Class II Permissive Change to add new channel bandwidths |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719 |
Date of Grant: 05/28/2014 Application Dated: 05/28/2014 |
| FreeWave Technologies Inc. |
| 5395 Pearl Parkway |
| Suite 100 |
| Boulder, CO 80301 |
| Attention: Michael Drake , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KNYPRW1001ER |
| Name of Grantee: | FreeWave Technologies Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | mini-PCI radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 MO | 15C | 907.0 - 922.0 | 0.93 |
| This is Class 2 Permissive Change to modular certification and to add specific antennas for use with this module as documented in this filing. Output Power listed is conducted as per original certification. For antennas with more than 6 dBi gain the output power must be decreased according to the Rule Part 15.247. This modular device approved for use in products which operate in fixed or mobile RF exposure configurations with respect to Rule Part 2.1091. This device and its antenna must operate with a separation distance from all persons as documented in this filing and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas must be professionally installed. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 8aeDfg4dpR+PtjubMQigcQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
FreeWave Technologies Inc. 5395 Pearl Parkway Suite 100 Boulder, CO 80301 United States |
Date of Grant: 05/28/2014 Application Dated: 05/28/2014 |
| Attention: Michael Drake , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KNYPRW1001ER |
| Name of Grantee: | FreeWave Technologies Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | mini-PCI radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 MO | 15C | 907.0 - 922.0 | 0.93 |
| This is Class 2 Permissive Change to modular certification and to add specific antennas for use with this module as documented in this filing. Output Power listed is conducted as per original certification. For antennas with more than 6 dBi gain the output power must be decreased according to the Rule Part 15.247. This modular device approved for use in products which operate in fixed or mobile RF exposure configurations with respect to Rule Part 2.1091. This device and its antenna must operate with a separation distance from all persons as documented in this filing and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas must be professionally installed. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |