FCC ID KQL-1110200

915 MHz Wireless Module

by Ezurio LLC

Grantee Code: KQL   Product Code: 1110200
Latest application date: 2025-07-14

FCC ID Device Details

FCC IDKQL-1110200
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeKQL
Product Code1110200
Applicant BusinessEzurio LLC 🇺🇸
Related Domains ezurio.com icertifi.com.tw
Equipment Class915 MHz Wireless Module
Test FirmInternational Certification Corp.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.4-927.6 MHzClass II permissive change or modification of presently authorized equipment2025-07-14
902.4-927.6 MHzOriginal Equipment2011-09-23

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2025-07-14PDF 743.7 KB
Users ManualUsers Manual2011-09-23PDF 25.9 KB
Internal PhotosInternal Photos2025-07-14PDF 2.5 MB
Internal PhotosInternal Photos2011-09-23PDF 1.2 MB
External PhotosExternal Photos2025-07-14PDF 536.7 KB
External PhotosExternal Photos2011-09-23PDF 269.8 KB
Label SampleID Label/Location Info2011-09-23PDF 142.6 KB
Test Setup PhotosTest Setup Photos2025-07-14PDF 777.4 KB
Test Setup PhotosTest Setup Photos2011-09-23PDF 903.3 KB
Antenna-1Test Report2025-07-14PDF 2.5 MB
Antenna-2Test Report2025-07-14PDF 2.2 MB
Antenna-3Test Report2025-07-14PDF 760.3 KB
Antenna-4Test Report2025-07-14PDF 527.6 KB
Test ReportTest Report2025-07-14PDF 3.1 MB
Test ReportTest Report2011-09-23PDF 1.2 MB
Part 2.911_d__5__7__KQL-1110200Attestation Statements2025-07-14PDF 243.1 KB
C2PCCover Letter(s)2025-07-14PDF 219.8 KB
LTCCover Letter(s)2025-07-14PDF 287.5 KB
POACover Letter(s)2025-07-14PDF 225.8 KB
Authorization LetterCover Letter(s)2011-09-23PDF 131.7 KB
Confidential LetterCover Letter(s)2011-09-23PDF 26.6 KB
Cover LetterCover Letter(s)2011-09-23PDF 41 KB
Laird StatementCover Letter(s)2011-09-23PDF 44 KB
Modular Approval Cover LetterCover Letter(s)2011-09-23PDF 44.2 KB
Submittal LetterCover Letter(s)2011-09-23PDF 15.3 KB
RF ExpRF Exposure Info2025-07-14PDF 198 KB
RF ExposureRF Exposure Info2011-09-23PDF 62.6 KB
Tune up ProcedureParts List/Tune Up Info2011-09-23PDF 6.5 KB
Block Diagram-1 Metadata onlyBlock DiagramPDF 96.4 KB
Block Diagram-2 Metadata onlyBlock DiagramPDF 94.3 KB
Schematics Metadata onlySchematicsPDF 273.4 KB
Operational Description Metadata onlyOperational DescriptionPDF 67.3 KB

Application Information

Application IDa02E9gJT4oHSZvtdsDu0bQ==
Final Action Date2025-07-14
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0013669072
Model1110200
Frequency Range902.4-927.6 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device Description915 MHz Wireless Module
Responsible PartyBrian Petted, Technology Leader, brian.petted@ezurio.com , 262-421-4974
AgentGary Gary Gary, International Certification Corp., GaryChang@icertifi.com.tw , 886-3-271-8628
Technical ContactGary Chang, International Certification Corp., GaryChang@icertifi.com.tw , 886-3-271-8628
Non-Technical ContactWendy Liao, International Certification Corp., wendyLiao@icertifi.com.tw , 886-3-271-8629
Test FirmFu-Cheng Chuang, International Certification Corp., Jeff@icertifi.com.tw , 886-3-271-8666
TCB Emaildl_radio-certification@kiwa.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsC2PC: 1) Power amplifier IC is replacing and hardware modification. 2) adding antennas. 3) Changing RF exposure evaluation from mobile to portable (minimum separation distance of 8.2 cm) Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filling must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
a02E9gJT4oHSZvtdsDu0bQ==2025-07-14Class II permissive change or modification of presently authorized equipment
CrX1ZP7J2TKHnZF48bEPYQ==2011-09-23Original Equipment

Equipment Authorization

FrequencyOutputRules
902.4-927.6 MHz0.2040000
902.4-927.6 MHz0.204000015C

Grants

TCB Grant - Application CrX1ZP7J2TKHnZF48bEPYQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 09/23/2011

Application Dated: 09/23/2011
AeroComm Corporation
11160 Thompson Avenue
P.O. Box N.A.,
Lenexa, KS 66219
 
Attention: Daniel Waters , Engineering Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KQL-1110200
Name of Grantee:  AeroComm Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 902-928 MHz FREQUENCY HOPPING SPREAD SPECTRUM TRANSMITTER
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.4  -  927.6 0.204  

Power output is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this must be installed to provide a separation distance of at least 20cm from all persons, and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.


EAS Grant - Application CrX1ZP7J2TKHnZF48bEPYQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

AeroComm Corporation
11160 Thompson Avenue P.O. Box N.A.,
Lenexa, KS 66219
United States
  Date of Grant: 09/23/2011

Application Dated: 09/23/2011
 
Attention: Daniel Waters , Engineering Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KQL-1110200
Name of Grantee:  AeroComm Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 902-928 MHz FREQUENCY HOPPING SPREAD SPECTRUM TRANSMITTER
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.4  -  927.6 0.204  

Power output is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this must be installed to provide a separation distance of at least 20cm from all persons, and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.



TCB Grant - Application a02E9gJT4oHSZvtdsDu0bQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Kiwa Nederland B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 07/14/2025

Application Dated: 07/14/2025
Ezurio LLC
W66N220 Commerce Court
Cedarburg, WI 53012
 
Attention: Brian Petted , Technology Leader

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  KQL-1110200
Name of Grantee:  Ezurio LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 915 MHz Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.4  -  927.6 0.204  

C2PC: 1) Power amplifier IC is replacing and hardware modification. 2) adding antennas. 3) Changing RF exposure evaluation from mobile to portable (minimum separation distance of 8.2 cm)

Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filling must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.