FCC ID KQL-4X90200
RF Transceiver Module
by AeroComm Corporation
Grantee Code: KQL Product Code: 4X90200
Latest application date: 2008-12-29
FCC ID Device Details
| FCC ID | KQL-4X90200 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | KQL |
| Product Code | 4X90200 |
| Applicant Business | AeroComm Corporation 🇺🇸 |
| Related Domains |  lairdtech.com |
| Equipment Class | RF Transceiver Module |
| Test Firm | TUV SUD Product Service GmbH PS-EMC-STR |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.2-927.4 MHz | Class II permissive change or modification of presently authorized equipment | 2008-12-29 |
| 902.2-927.4 MHz | Original Equipment | 2007-08-28 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual 1 | Users Manual | 2007-08-28 | PDF 2.2 MB |
| Users Manual 2 | Users Manual | 2007-08-28 | PDF 2.2 MB |
| Internal Photos | Internal Photos | 2007-08-28 | PDF 309.5 KB |
| External Photos | External Photos | 2007-08-28 | PDF 142.2 KB |
| Label Info | ID Label/Location Info | 2007-08-28 | PDF 154.1 KB |
| Antenna Data Sheet | Operational Description | 2008-12-29 | PDF 280.3 KB |
| Test Setup Photos | Test Setup Photos | 2008-12-29 | PDF 329.3 KB |
| Test Setup Photos 1 | Test Setup Photos | 2007-08-28 | PDF 455 KB |
| Test Setup Photos 2 | Test Setup Photos | 2007-08-28 | PDF 472.1 KB |
| Annex to Test Report | Test Report | 2008-12-29 | PDF 8.6 KB |
| Test Report | Test Report | 2008-12-29 | PDF 1.1 MB |
| Annex A to Test Report 1 | Test Report | 2007-08-28 | PDF 438 KB |
| Annex B to Test Report 1 | Test Report | 2007-08-28 | PDF 426.6 KB |
| Annex C to Test Report 1 | Test Report | 2007-08-28 | PDF 437 KB |
| Annex D to Test Report 1 | Test Report | 2007-08-28 | PDF 463.9 KB |
| Annex E to TEst Report 2 | Test Report | 2007-08-28 | PDF 458.1 KB |
| Annex F to TEst Report 2 | Test Report | 2007-08-28 | PDF 459.3 KB |
| Annex G to TEst Report 2 | Test Report | 2007-08-28 | PDF 463.8 KB |
| Annex H to TEst Report 2 | Test Report | 2007-08-28 | PDF 477 KB |
| Annex to Test Reports | Test Report | 2007-08-28 | PDF 31 KB |
| Test Report 1 | Test Report | 2007-08-28 | PDF 1.6 MB |
| Test Report 2 | Test Report | 2007-08-28 | PDF 1.4 MB |
| Class II Letter | Cover Letter(s) | 2008-12-29 | PDF 23.4 KB |
| Applicant Letter | Cover Letter(s) | 2007-08-28 | PDF 98.9 KB |
| Request Modular Approval | Cover Letter(s) | 2007-08-28 | PDF 104.4 KB |
| Request for Confidentiality | Cover Letter(s) | 2007-08-28 | PDF 87.2 KB |
Application Information
| Application ID | jHmbyY5i+gGBf/hPyJyI0A== |
|---|---|
| Final Action Date | 2008-12-29 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0006309082 |
| Model | -4X90200 |
| Frequency Range | 902.2-927.4 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | RF Transceiver Module |
| Responsible Party | Daniel Waters, Engineering Specialist, daniel.waters@lairdtech.com , 913-981-5712 |
| Agent | Johann Johann Johann, Senton GmbH, office@senton.de  , 09421 55 22 13 |
| Test Firm | Rainer Heller, TUV SUD Product Service GmbH PS-EMC-STR, rainer.heller@tuev-sued.de  , 49-09421-5522-20 |
| TCB Email | Brandhorst.dirk@phoenix-testlab.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change adds an addditional antenna. Output power listed is conducted. Limited Modular Approval. This OEM module is approved for use in products operating as mobile and fixed transmitting device. The only antennas approved for use with this module are those documented in the filing and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. End users may not be provided with the module installation instructions. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| jHmbyY5i+gGBf/hPyJyI0A== | 2008-12-29 | Class II permissive change or modification of presently authorized equipment |
| 3hgzGMXmTO8mi8T6a2gJjw== | 2007-08-28 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.2-927.4 MHz | 0.1270000 | 15C |
Grants
TCB Grant - Application jHmbyY5i+gGBf/hPyJyI0A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 12/29/2008 Application Dated: 12/29/2008 |
| AeroComm Corporation |
| 11160 Thompson Avenue |
| P.O. Box N.A., |
| Lenexa, KS 66219 |
| Attention: Daniel Waters , Engineering Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KQL-4X90200 |
| Name of Grantee: | AeroComm Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RF Transceiver Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.4 | 0.127 |
| Class II Permissive Change adds an addditional antenna. Output power listed is conducted. Limited Modular Approval. This OEM module is approved for use in products operating as mobile and fixed transmitting device. The only antennas approved for use with this module are those documented in the filing and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. End users may not be provided with the module installation instructions. |
EAS Grant - Application jHmbyY5i+gGBf/hPyJyI0A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
AeroComm Corporation 11160 Thompson Avenue P.O. Box N.A., Lenexa, KS 66219 United States |
Date of Grant: 12/29/2008 Application Dated: 12/29/2008 |
| Attention: Daniel Waters , Engineering Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KQL-4X90200 |
| Name of Grantee: | AeroComm Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RF Transceiver Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.4 | 0.127 |
| Class II Permissive Change adds an addditional antenna. Output power listed is conducted. Limited Modular Approval. This OEM module is approved for use in products operating as mobile and fixed transmitting device. The only antennas approved for use with this module are those documented in the filing and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. End users may not be provided with the module installation instructions. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 08/28/2007 Application Dated: 08/28/2007 |
| AeroComm Corporation |
| 11160 Thompson Avenue |
| P.O. Box N.A., |
| Lenexa, KS 66219 |
| Attention: Daniel Waters , Engineering Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KQL-4X90200 |
| Name of Grantee: | AeroComm Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RF Transceiver Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.4 | 0.127 |
| Output power listed is conducted. Limited Modular Approval. This OEM module is approved for use in products operating as mobile and fixed transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. End users may not be provided with the module installation instructions. |
EAS Grant - Application 3hgzGMXmTO8mi8T6a2gJjw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
AeroComm Corporation 11160 Thompson Avenue P.O. Box N.A., Lenexa, KS 66219 United States |
Date of Grant: 08/28/2007 Application Dated: 08/28/2007 |
| Attention: Daniel Waters , Engineering Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | KQL-4X90200 |
| Name of Grantee: | AeroComm Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RF Transceiver Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.4 | 0.127 |
| Output power listed is conducted. Limited Modular Approval. This OEM module is approved for use in products operating as mobile and fixed transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. End users may not be provided with the module installation instructions. |
| Mail To: |