FCC ID L9VWAP-5930

802.11ac Dual Band concurrent Wireless Router

by Comtrend Corporation

Grantee Code: L9V   Product Code: WAP5930
Latest application date: 2015-06-02

FCC ID Device Details

FCC IDL9VWAP-5930
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeL9V
Product CodeWAP5930
Applicant BusinessComtrend Corporation 🇹🇼
Related Domains comtrend.com
Equipment Class802.11ac Dual Band concurrent Wireless Router
Test FirmSporton International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: NDD9562081312 Grant Date: 01/13/20142015-06-02
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: NDD9562081312 Grant Date: 01/13/20142015-06-02

Exhibits

DocumentTypeAvailableFile
ext photosExternal Photos2015-06-02PDF 270.5 KB
LabelID Label/Location Info2015-06-02PDF 122.9 KB
Change in ID requestCover Letter(s)2015-06-02PDF 190.3 KB
PoACover Letter(s)2015-06-02PDF 133.1 KB
PoA from GranteeCover Letter(s)2015-06-02PDF 203.1 KB

Application Information

Application IDjE31QMeRmuZP/SBDDhJHkA==
Final Action Date2015-06-02
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: NDD9562081312 Grant Date: 01/13/2014
Applicant FRN0019788504
ModelWAP-5930
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description802.11ac Dual Band concurrent Wireless Router
Responsible PartyBill Wang, bill.wang@comtrend.com , +886-2-2999-8261
AgentKevin Kevin Kevin, Sporton Int Inc, KevinLiang@sporton.com.tw , 88633273456
Test FirmAlex Chen, Sporton International Inc., alex@sporton.com.tw , 886-3-327-3456
TCB EmailBrandhorst.dirk@phoenix-testlab.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is the maximum combined conducted peak output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R (2.4GHz) and 1T1R (5GHz) Spatial Multiplexing MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode.

Applications

Application IDDatePurpose
jE31QMeRmuZP/SBDDhJHkA==2015-06-02Change in identification of presently authorized equipment. Original FCC ID: NDD9562081312 Grant Date: 01/13/2014
2FgdhrsYPFzWN6y9nhRylQ==2015-06-02Change in identification of presently authorized equipment. Original FCC ID: NDD9562081312 Grant Date: 01/13/2014

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.73615CCC, MO
5180-5240 MHz0.040000015ECC, MO
5745-5825 MHz0.29615CCC, MO

Grants

TCB Grant - Application jE31QMeRmuZP/SBDDhJHkA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 06/02/2015

Application Dated: 06/02/2015
Comtrend Corporation
3F-1, 10 Lane 609, Chung Hsin Road, Section 5,
San Chung Dist,
New Taipei City,, 24159
Taiwan
 
Attention: Bill Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  L9VWAP-5930
Name of Grantee:  Comtrend Corporation
Equipment Class: Digital Transmission System
Notes: 802.11ac Dual Band concurrent Wireless Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.736  
CC MO 15C 5745.0  -  5825.0 0.296  

Output Power listed is the maximum combined conducted peak output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R (2.4GHz) and 1T1R (5GHz) Spatial Multiplexing MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application jE31QMeRmuZP/SBDDhJHkA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Comtrend Corporation
3F-1, 10 Lane 609, Chung Hsin Road, Section 5, San Chung Dist,
New Taipei City,, 24159
Taiwan
  Date of Grant: 06/02/2015

Application Dated: 06/02/2015
 
Attention: Bill Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  L9VWAP-5930
Name of Grantee:  Comtrend Corporation
Equipment Class: Digital Transmission System
Notes: 802.11ac Dual Band concurrent Wireless Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.736  
CC MO 15C 5745.0  -  5825.0 0.296  

Output Power listed is the maximum combined conducted peak output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R (2.4GHz) and 1T1R (5GHz) Spatial Multiplexing MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 2FgdhrsYPFzWN6y9nhRylQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 06/02/2015

Application Dated: 06/02/2015
Comtrend Corporation
3F-1, 10 Lane 609, Chung Hsin Road, Section 5,
San Chung Dist,
New Taipei City,, 24159
Taiwan
 
Attention: Bill Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  L9VWAP-5930
Name of Grantee:  Comtrend Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11ac Dual Band concurrent Wireless Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.04  

Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R (2.4GHZ) , 1T1R (5GHZ) Spatial Multiplexing MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. Operating of this device is restricted to indoor use only.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 2FgdhrsYPFzWN6y9nhRylQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Comtrend Corporation
3F-1, 10 Lane 609, Chung Hsin Road, Section 5, San Chung Dist,
New Taipei City,, 24159
Taiwan
  Date of Grant: 06/02/2015

Application Dated: 06/02/2015
 
Attention: Bill Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  L9VWAP-5930
Name of Grantee:  Comtrend Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11ac Dual Band concurrent Wireless Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.04  

Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R (2.4GHZ) , 1T1R (5GHZ) Spatial Multiplexing MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. Operating of this device is restricted to indoor use only.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: