FCC ID LDK073002357
Communication module installed in Telepresence unit
by Cisco Systems Inc
Grantee Code: LDK Product Code: 073002357
Latest application date: 2022-03-04
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-03-04 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2022-03-04 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-03-04 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-11-11 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-11-11 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-11-11 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-11-03 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-11-03 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-11-03 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE5XV1XA Grant Date: 02/17/2021 | 2021-10-15 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE5XV1XA Grant Date: 02/17/2021 | 2021-10-15 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE5XV1XA Grant Date: 02/17/2021 | 2021-10-15 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2022-06-12 | PDF 1,019.4 KB |
| User Manual | Users Manual | 2022-02-19 | PDF 814.4 KB |
| User Manual II | Users Manual | 2022-02-19 | PDF 1.6 MB |
| User Manual | Users Manual | 2021-11-08 | PDF 5.7 MB |
| User Manual II | Users Manual | 2021-11-08 | PDF 2.3 MB |
| Internal Photos | Internal Photos | 2022-06-12 | PDF 878.6 KB |
| Internal Photos | Internal Photos | 2022-02-19 | PDF 1 MB |
| Internal Photos | Internal Photos | 2021-11-08 | PDF 748.2 KB |
| External Photos | External Photos | 2022-06-12 | PDF 948.3 KB |
| External Photos | External Photos | 2022-02-19 | PDF 817.5 KB |
| External Photos | External Photos | 2021-11-08 | PDF 148.9 KB |
| External Photos | External Photos | 2021-10-15 | PDF 135.1 KB |
| Label and Label Location | ID Label/Location Info | 2022-03-04 | PDF 1 MB |
| Label | ID Label/Location Info | 2021-11-11 | PDF 535.9 KB |
| Label | ID Label/Location Info | 2021-11-03 | PDF 276.4 KB |
| Label II | ID Label/Location Info | 2021-11-03 | PDF 1.1 MB |
| Label III | ID Label/Location Info | 2021-11-03 | PDF 3.7 MB |
| Label | ID Label/Location Info | 2021-10-15 | PDF 271.5 KB |
| Test Setup Photos | Test Setup Photos | 2022-06-12 | PDF 1.9 MB |
| Test Setup Photos | Test Setup Photos | 2022-02-19 | PDF 655 KB |
| Test Setup Photos | Test Setup Photos | 2021-11-08 | PDF 172.4 KB |
| Test Report | Test Report | 2022-03-04 | PDF 1.4 MB |
| Test Report | Test Report | 2022-03-04 | PDF 2.4 MB |
| Test Report | Test Report | 2022-03-04 | PDF 620.2 KB |
| Test Report | Test Report | 2021-11-11 | PDF 682.9 KB |
| Test Report | Test Report | 2021-11-11 | PDF 1.7 MB |
| Test Report | Test Report | 2021-11-11 | PDF 2.6 MB |
| Test Report II | Test Report | 2021-11-11 | PDF 689.8 KB |
| Test Report | Test Report | 2021-11-03 | PDF 4.4 MB |
| Test Report | Test Report | 2021-11-03 | PDF 1.1 MB |
| Test Report | Test Report | 2021-11-03 | PDF 1.4 MB |
| Cover Letters | Cover Letter(s) | 2022-03-04 | PDF 401.6 KB |
| C2PC Request Letter | Cover Letter(s) | 2021-11-11 | PDF 271 KB |
| Confidentiality Letter | Cover Letter(s) | 2021-11-11 | PDF 342.5 KB |
| C2PC Request Letter | Cover Letter(s) | 2021-11-03 | PDF 111.9 KB |
| Confidentiality Cover Letter | Cover Letter(s) | 2021-11-03 | PDF 342.5 KB |
| Model Differences Letter | Cover Letter(s) | 2021-11-03 | PDF 20.5 KB |
| Agent Authorization Letter | Cover Letter(s) | 2021-10-15 | PDF 324.5 KB |
| Change of FCC ID Request Letter | Cover Letter(s) | 2021-10-15 | PDF 298.4 KB |
| Grantee Permission Letter | Cover Letter(s) | 2021-10-15 | PDF 811.3 KB |
| RF Exposure info | RF Exposure Info | 2022-03-04 | PDF 150.2 KB |
| RF Exposure Report | RF Exposure Info | 2021-11-11 | PDF 144.3 KB |
| RF Exposure Report | RF Exposure Info | 2021-11-03 | PDF 127.8 KB |
| Block Diagram Metadata only | Block Diagram | PDF 715.4 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 225 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 765.7 KB | |
| Schematics Metadata only | Schematics | PDF 1.7 MB | |
| Schematics Metadata only | Schematics | PDF 1.7 MB | |
| Schematics Metadata only | Schematics | PDF 1.8 MB | |
| Operational Description Metadata only | Operational Description | PDF 114.9 KB | |
| Operational Description Metadata only | Operational Description | PDF 844.6 KB | |
| Operational Description Metadata only | Operational Description | PDF 86.9 KB | |
| Operational Description II Metadata only | Operational Description | PDF 709.9 KB | |
| Operational Description II Metadata only | Operational Description | PDF 695 KB | |
| Operational Description III Metadata only | Operational Description | PDF 133.3 KB | |
| Operational Description IV Metadata only | Operational Description | PDF 96.3 KB | |
| Operational Desscription Metadata only | Operational Description | PDF 844.6 KB | |
| Part List Metadata only | Parts List/Tune Up Info | PDF 2.3 MB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 2.3 MB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 484.6 KB |
Application Information
| Application ID | n83hT7L/X2B3aTitmPAQtA== |
|---|---|
| Final Action Date | 2022-03-04 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0004968939 |
| Model | 073002357 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Communication module installed in Telepresence unit |
| Responsible Party | Samuel Kim, Manager, Engineering, samukim@cisco.com  , 408-527-1446 |
| Test Firm | Helena Vogl, Nemko Scandinavia AS, Helena.Vogl@nemko.com  , +4722960330 |
| TCB Email | jin.xu@nemko.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 06/12/2022 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC as described in the filing. Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| n83hT7L/X2B3aTitmPAQtA== | 2022-03-04 | Class II permissive change or modification of presently authorized equipment |
| Z/vVvqSEFMll7P2u0PrgPQ== | 2022-03-04 | Class II permissive change or modification of presently authorized equipment |
| X6Vrd3/07CSOKv7Kl1IUNQ== | 2022-03-04 | Class II permissive change or modification of presently authorized equipment |
| ogoC3BXtEFhvts63pibwgQ== | 2021-11-11 | Class II permissive change or modification of presently authorized equipment |
| nKaeFhGSAxSDEbvGJAW/bA== | 2021-11-11 | Class II permissive change or modification of presently authorized equipment |
| +jahpuRsXFbeVmX+eVNAbQ== | 2021-11-11 | Class II permissive change or modification of presently authorized equipment |
| wyfVQTdgQ8t5AdwbJVTKYQ== | 2021-11-03 | Class II permissive change or modification of presently authorized equipment |
| iugRHliu3lDfidIqZeo18A== | 2021-11-03 | Class II permissive change or modification of presently authorized equipment |
| bUbSfXNwd2ouieWdO8aVnA== | 2021-11-03 | Class II permissive change or modification of presently authorized equipment |
| wolqn/RU3hqrQFefTsovdg== | 2021-10-15 | Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE5XV1XA Grant Date: 02/17/2021 |
| aqu84EWibSfKQxh8L+9j6Q== | 2021-10-15 | Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE5XV1XA Grant Date: 02/17/2021 |
| HqBEvGeuJhdYRoBeWveWOA== | 2021-10-15 | Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE5XV1XA Grant Date: 02/17/2021 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.0120000 | 15C | CC |
| 2402-2480 MHz | 0.005 | 15C | |
| 2402-2480 MHz | 0.0120000 | 15C | |
| 2402-2480 MHz | 0.005 | 15C | CC |
| 2412-2462 MHz | 0.68 | 15C | CC, MO |
| 2412-2462 MHz | 0.68 | 15C | MO |
| 5180-5240 MHz | 0.04 | 15E | CC, MO |
| 5180-5240 MHz | 0.04 | 15E | MO |
| 5260-5320 MHz | 0.087 | 15E | CC, MO, ND |
| 5260-5320 MHz | 0.087 | 15E | MO, ND |
| 5500-5700 MHz | 0.1 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.1 | 15E | MO, ND |
| 5745-5825 MHz | 0.11 | 15E | CC, MO |
| 5745-5825 MHz | 0.11 | 15E | MO |
Grants
TCB Grant - Application Z/vVvqSEFMll7P2u0PrgPQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 03/04/2022 Application Dated: 03/04/2022 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK073002357 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Communication module installed in Telepresence unit |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15E | 5180.0 - 5240.0 | 0.04 | ||
| MO ND | 15E | 5260.0 - 5320.0 | 0.087 | ||
| MO ND | 15E | 5500.0 - 5700.0 | 0.1 | ||
| MO | 15E | 5745.0 - 5825.0 | 0.11 |
| C2PC as described in this filing. Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application Z/vVvqSEFMll7P2u0PrgPQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 03/04/2022 Application Dated: 03/04/2022 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK073002357 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Communication module installed in Telepresence unit |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15E | 5180.0 - 5240.0 | 0.04 | ||
| MO ND | 15E | 5260.0 - 5320.0 | 0.087 | ||
| MO ND | 15E | 5500.0 - 5700.0 | 0.1 | ||
| MO | 15E | 5745.0 - 5825.0 | 0.11 |
| C2PC as described in this filing. Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 03/04/2022 Application Dated: 03/04/2022 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK073002357 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Communication module installed in Telepresence unit |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.012 |
| C2PC as described in the filing. Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application X6Vrd3/07CSOKv7Kl1IUNQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 03/04/2022 Application Dated: 03/04/2022 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK073002357 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Communication module installed in Telepresence unit |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.012 |
| C2PC as described in the filing. Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 11/03/2021 Application Dated: 11/03/2021 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK073002357 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.012 |
| C2PC as described in this filing. Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application wyfVQTdgQ8t5AdwbJVTKYQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 11/03/2021 Application Dated: 11/03/2021 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK073002357 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.012 |
| C2PC as described in this filing. Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 10/15/2021 Application Dated: 10/14/2021 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK073002357 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.68 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application wolqn/RU3hqrQFefTsovdg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 10/15/2021 Application Dated: 10/14/2021 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK073002357 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.68 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 11/11/2021 Application Dated: 11/11/2021 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK073002357 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.04 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.087 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.1 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.11 |
| C2PC as described in this filing. Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application ogoC3BXtEFhvts63pibwgQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 11/11/2021 Application Dated: 11/11/2021 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK073002357 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.04 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.087 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.1 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.11 |
| C2PC as described in this filing. Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 11/11/2021 Application Dated: 11/11/2021 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK073002357 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.68 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| C2PC as described in this filing. Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application nKaeFhGSAxSDEbvGJAW/bA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 11/11/2021 Application Dated: 11/11/2021 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK073002357 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.68 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| C2PC as described in this filing. Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 03/04/2022 Application Dated: 03/04/2022 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK073002357 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication module installed in Telepresence unit |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.005 | |||
| MO | 15C | 2412.0 - 2462.0 | 0.68 |
| C2PC as described in the filing. Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application n83hT7L/X2B3aTitmPAQtA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 03/04/2022 Application Dated: 03/04/2022 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK073002357 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication module installed in Telepresence unit |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.005 | |||
| MO | 15C | 2412.0 - 2462.0 | 0.68 |
| C2PC as described in the filing. Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 11/03/2021 Application Dated: 11/03/2021 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK073002357 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.04 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.087 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.1 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.11 |
| C2PC as described in this filing. Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application iugRHliu3lDfidIqZeo18A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 11/03/2021 Application Dated: 11/03/2021 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK073002357 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.04 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.087 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.1 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.11 |
| C2PC as described in this filing. Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 10/15/2021 Application Dated: 10/15/2021 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK073002357 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Communications Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.04 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.087 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.1 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.11 |
| Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application HqBEvGeuJhdYRoBeWveWOA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 10/15/2021 Application Dated: 10/15/2021 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK073002357 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Communications Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.04 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.087 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.1 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.11 |
| Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 11/03/2021 Application Dated: 11/03/2021 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK073002357 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.68 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| C2PC as described in this filing. Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application bUbSfXNwd2ouieWdO8aVnA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 11/03/2021 Application Dated: 11/03/2021 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK073002357 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.68 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| C2PC as described in this filing. Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 10/15/2021 Application Dated: 10/14/2021 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK073002357 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Communication Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.012 |
| Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application aqu84EWibSfKQxh8L+9j6Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 10/15/2021 Application Dated: 10/14/2021 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK073002357 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Communication Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.012 |
| Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 11/11/2021 Application Dated: 11/11/2021 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK073002357 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.012 |
| C2PC as described in this filing. Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application +jahpuRsXFbeVmX+eVNAbQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 11/11/2021 Application Dated: 11/11/2021 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK073002357 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.012 |
| C2PC as described in this filing. Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |