1. FCC ID
  2. LDK
  3. LDK102042

FCC ID LDK102042

Mini-PCI Card

by Cisco Systems Inc

Grantee Code: LDK   Product Code: 102042
Latest application date: 2002-08-13

FCC ID Device Details

FCC IDLDK102042
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeLDK
Product Code102042
Applicant BusinessCisco Systems Inc 🇺🇸
Related Domains cisco.com rheintech.com
Equipment ClassMini-PCI Card
Test FirmRhein Tech Laboratories, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2002-08-13
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2002-03-28
2412-2462 MHzOriginal Equipment2001-05-30

Exhibits

DocumentTypeAvailableFile
2002115 1200 AP dual mode QSG final draft 080802Users Manual2002-08-13PDF 796.1 KB
2002115 ap1200Users Manual2002-08-13PDF 2.5 MB
031402 manualUsers Manual2002-03-28PDF 396.2 KB
ManualUsers Manual2001-05-30PDF 68.3 KB
Internal PhotosInternal Photos2001-05-30PDF 232.5 KB
EUT PhotosExternal Photos2002-08-13PDF 1,008.3 KB
021502 Antenna PicturesExternal Photos2002-03-28PDF 1.4 MB
Antenna PicturesExternal Photos2001-05-30PDF 1 MB
External PhotosExternal Photos2001-05-30PDF 193.3 KB
Pictures of additional antennasExternal Photos2001-05-30PDF 166 KB
Label InformationID Label/Location Info2001-05-30PDF 126.4 KB
Antenna SpecificationsOperational Description2002-08-13PDF 210.8 KB
Test Setup PhotosTest Setup Photos2002-08-13PDF 694.9 KB
021502 Test PicturesTest Setup Photos2002-03-28PDF 459.3 KB
022202 revised Test picturesTest Setup Photos2002-03-28PDF 1.9 MB
Test PicturesTest Setup Photos2001-05-30PDF 198 KB
2002115 TX AND RX SPUR HARMONIC DATATest Report2002-08-13PDF 72.4 KB
Test ReportTest Report2002-08-13PDF 432.6 KB
021502 Antenna Data SheetsTest Report2002-03-28PDF 1.2 MB
021502 Test ReportTest Report2002-03-28PDF 1.6 MB
022202 revised Test ReportTest Report2002-03-28PDF 1.6 MB
031402 Test ReportTest Report2002-03-28PDF 1.6 MB
Additional antenna test dataTest Report2001-05-30PDF 194.4 KB
Antenna InformationTest Report2001-05-30PDF 282.3 KB
PG ReportTest Report2001-05-30PDF 39.2 KB
Test reportTest Report2001-05-30PDF 1.3 MB
reportTest Report2001-05-30PDF 840.7 KB
CISCO LDK102042Response 81102Cover Letter(s)2002-08-13PDF 34.2 KB
Cover LetterCover Letter(s)2002-08-13PDF 166.5 KB
Authorization LetterCover Letter(s)2001-05-30PDF 109.5 KB
Confidential LetterCover Letter(s)2001-05-30PDF 5 KB
MPE EvaluationRF Exposure Info2002-08-13PDF 477.3 KB
021502 RF ExposureRF Exposure Info2002-03-28PDF 200.2 KB
022202 revised RF ExposureRF Exposure Info2002-03-28PDF 219.4 KB
RF ExposureRF Exposure Info2001-05-30PDF 213 KB
SARRF Exposure Info2001-05-30PDF 1.6 MB
SAR ReportRF Exposure Info2001-05-30PDF 1.7 MB
Schematics Metadata onlySchematicsPDF 288.3 KB
Product Description Metadata onlyOperational DescriptionPDF 287.2 KB

Application Information

Application ID5ka+tBeA5hi85S9KSCGxsw==
Final Action Date2002-08-13
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0004968939
Model102042
Frequency Range2412-2462 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionMini-PCI Card
Responsible PartySamuel Kim, Manager, Engineering, samukim@cisco.com , 408-527-1446
AgentKathy Kathy Kathy, Rhein Tech Laboratories, FCCINFO@rheintech.com , 703-689-0368
Technical ContactDesmond Fraser, Rhein Tech Laboratories, FCCINFO@rheintech.com , 703-689-0368
Non-Technical ContactKathy Grzovic, Rhein Tech Laboratories, FCCINFO@rheintech.com , 703-689-0368
Test FirmRick McMurray, Rhein Tech Laboratories, Inc., FCCINFO@rheintech.com , 703-689-0368
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power is conducted. Co-located transmitter operating conditions with FCC ID LDK102045 have been evaluated as described in this filing. Separate RF exposure evaluation is required for any portable or co-located transmitter conditions other than as evaluated in this filing, and separate equipment certification may be needed depending on co-location configurations and RF exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
5ka+tBeA5hi85S9KSCGxsw==2002-08-13Class II permissive change or modification of presently authorized equipment
luoTN7eMmHtJLjf6zmeD6A==2002-03-28Class II permissive change or modification of presently authorized equipment
GNOpKpkvnukhTKoF0dB0rw==2001-05-30Original Equipment

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.100000015C
2412-2462 MHz0.110000015C

Grants

TCB Grant - Application luoTN7eMmHtJLjf6zmeD6A==

This application does not exist.

EAS Grant - Application luoTN7eMmHtJLjf6zmeD6A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States 		  Date of Grant: 03/28/2002

Application Dated: 02/12/2002
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDK102042
Name of Grantee:  Cisco Systems Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: AIR-MPI352 series
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.11  

This Permissive Change/Modification was originally issued on 03/14/2002.

Modular approval. Power is conducted.

Fixed Configuration: The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2 meters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

Mobile Configuration: The antenna(s) must be installed to provide a separation distance of at least 20 cm from all persons during normal operation. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

OEM integrators and end-users must be provided with operating requirements for satisfying RF exposure requirements. This module has been tested for SAR compliance with the antennas described in this filing and are approved for use in product configurations that do not require the antenna to be next to a person's body or operating in body-worn conditions. The highest reported SAR value is 1.31 W/kg.



TCB Grant - Application GNOpKpkvnukhTKoF0dB0rw==

This application does not exist.

EAS Grant - Application GNOpKpkvnukhTKoF0dB0rw==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States 		  Date of Grant: 05/30/2001

Application Dated: 03/09/2001
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDK102042
Name of Grantee:  Cisco Systems Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: AIR-MPI352
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.11  

Power is conducted.

Modular approval.

OEM integrators and end-users must be provided with operating requirements for satisfying RF exposure requirements. This module has been tested for SAR compliance with the antennas described in this filing and are approved for use in product configurations that do not require the antenna to be next to a person's body or operating in body-worn conditions. The highest reported SAR value is 1.31 W/kg.



TCB Grant - Application 5ka+tBeA5hi85S9KSCGxsw==

This application does not exist.

EAS Grant - Application 5ka+tBeA5hi85S9KSCGxsw==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States 		  Date of Grant: 08/13/2002

Application Dated: 07/03/2002
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDK102042
Name of Grantee:  Cisco Systems Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Mini-PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.1  

Output power is conducted. Co-located transmitter operating conditions with FCC ID LDK102045 have been evaluated as described in this filing. Separate RF exposure evaluation is required for any portable or co-located transmitter conditions other than as evaluated in this filing, and separate equipment certification may be needed depending on co-location configurations and RF exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: