FCC ID LDK102057

FCC ID	LDK102057
Mirrors	fcc.id \| gov \| fccid.ai
Grantee Code	LDK
Product Code	102057
Applicant Business	Cisco Systems Inc 🇺🇸
Related Domains	cisco.com
Equipment Class	Air-AP1000 Series Dual Band 2.4/5 GHz Access Point
Test Firm	Compliance Certification Services

Frequency Range	Application Purpose	Final Action Date
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2007-04-12
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2005-07-28
2412-2462 MHz	Class II permissive change or modification of presently authorized equipment	2005-07-28
5180-5240 MHz	Change in identification of presently authorized equipment. Original FCC ID: QTZ1200W Grant Date: 06/20/2004	2005-06-08
2412-2462 MHz	Change in identification of presently authorized equipment. Original FCC ID: QTZ1200W Grant Date: 06/20/2004	2005-06-08

Document	Type	Available	File
User Manual	Users Manual	2005-07-28	PDF 2.4 MB
External Photos 1010	External Photos	2005-06-08	PDF 518.7 KB
External Photos 1020 1030	External Photos	2005-06-08	PDF 499.3 KB
FCC ID Label	ID Label/Location Info	2005-06-08	PDF 1.3 MB
ID Label Location Info	ID Label/Location Info	2005-06-08	PDF 1.3 MB
Test Report	Test Report	2005-07-28	PDF 1.3 MB
Class II permissive change cover letter	Cover Letter(s)	2007-04-12	PDF 19.4 KB
Authorization Letter	Cover Letter(s)	2005-07-28	PDF 30 KB
Class II Permissive Change Letter	Cover Letter(s)	2005-07-28	PDF 27.9 KB
TCB Q and A	Cover Letter(s)	2005-07-28	PDF 14.7 KB
TCB Q and A	Cover Letter(s)	2005-07-28	PDF 14.6 KB
Application Letter	Cover Letter(s)	2005-06-08	PDF 27.5 KB
Authorization Letter	Cover Letter(s)	2005-06-08	PDF 52.8 KB
TCB Q A	Cover Letter(s)	2005-06-08	PDF 11 KB
TCB Q and A Metadata only	Cover Letter(s)	2005-06-08	PDF 11.6 KB
TCB Q and A	Cover Letter(s)	2005-06-08	PDF 11.2 KB
Antenna Information	Parts List/Tune Up Info	2005-07-28	PDF 261.9 KB

Application ID	3LeBgSY3zDTR3X/sWbrceg==
Final Action Date	2007-04-12
Application Purpose	Class II permissive change or modification of presently authorized equipment
Applicant FRN	0004968939
Model	102057
Frequency Range	5180-5240 MHz
Equipment Class	NII - Unlicensed National Information Infrastructure TX
Device Description	Air-AP1000 Series Dual Band 2.4/5 GHz Access Point
Responsible Party	Gerard Thorpe, Manager, Engineering, gthorpe@cisco.com , 408-527-7097
Test Firm	Barbara Judge, Compliance Certification Services, bjudge@ccsemc.com , 510-771-1104
TCB Email	mike.kuo@ccsemc.com
TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term Confidentiality	No
Long-Term Confidentiality	No
Grant Deferral	No
Modular Equipment	Does not apply
Composite Device	Yes
Composite Part	No
Cognitive Radio	No
Authorization Waiver	No
Authorization Waiver Approved	No
Section 5301 Certification	Yes
Related OET Knowledge DataBase Inquiry	No
Grant Comments	Grant conditions from original and subsequent filings if any under this FCC ID are applicable, also the following concerning this Class II permissive change: disable 5.260-5.320 GHz band via software. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. The maximum net effective gain of any external 2.4 GHz antenna is 13 dBi and for external 5 GHz antenna is 14 dBi. Certain external antennas have frequency band limitations as shown in filings under this FCC ID and must be professionally installed in order to meet the requirements of 15.15. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. .

Application ID	Date	Purpose
3LeBgSY3zDTR3X/sWbrceg==	2007-04-12	Class II permissive change or modification of presently authorized equipment
5UOrABUdwZNqOrMiLhuupA==	2005-07-28	Class II permissive change or modification of presently authorized equipment
3AnRke8OKJlnM2moQbKo8g==	2005-07-28	Class II permissive change or modification of presently authorized equipment
h0SyA8syCVwHIR0FyAiQNg==	2005-06-08	Change in identification of presently authorized equipment. Original FCC ID: QTZ1200W Grant Date: 06/20/2004
T4XVibB2GciNcyneuRy6hg==	2005-06-08	Change in identification of presently authorized equipment. Original FCC ID: QTZ1200W Grant Date: 06/20/2004

Frequency	Output	Rules	Grant Notes
2412-2462 MHz	0.079	15C	36, CC
2412-2462 MHz	0.079	15C	CC
5180-5240 MHz	0.034	15E	36, CC
5180-5240 MHz	0.0340000	15E	36, CC
5260-5320 MHz	0.121	15E	36, CC
5745-5825 MHz	0.093	15C	36, CC
5745-5825 MHz	0.093	15C	CC

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 06/08/2005

Application Dated: 06/08/2005

Cisco Systems Inc

125 West Tasman Drive

San Jose, CA 95134-1706

Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	LDK102057

Name of Grantee:	Cisco Systems Inc

Equipment Class:	Digital Transmission System
Notes:	802.11 a/b/g Access Point

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0 - 2462.0	0.079
CC	15C	5745.0 - 5825.0	0.093

Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. The maximum net effective gain of any external 2.4 GHz antenna is 13 dBi and for external 5 GHz antenna is 14 dBi. Certain external antennas have frequency band limitations as shown in filings under this FCC ID and must be professionally installed in order to meet the requirements of 15.15. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States

Date of Grant: 06/08/2005

Application Dated: 06/08/2005

Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	LDK102057

Name of Grantee:	Cisco Systems Inc

Equipment Class:	Digital Transmission System
Notes:	802.11 a/b/g Access Point
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0 - 2462.0	0.079
CC	15C	5745.0 - 5825.0	0.093

Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. The maximum net effective gain of any external 2.4 GHz antenna is 13 dBi and for external 5 GHz antenna is 14 dBi. Certain external antennas have frequency band limitations as shown in filings under this FCC ID and must be professionally installed in order to meet the requirements of 15.15. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application h0SyA8syCVwHIR0FyAiQNg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 06/08/2005

Application Dated: 06/08/2005

Cisco Systems Inc

125 West Tasman Drive

San Jose, CA 95134-1706

Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	LDK102057

Name of Grantee:	Cisco Systems Inc

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 a/b/g Access Point

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15E	5180.0 - 5240.0	0.034
36 CC	15E	5260.0 - 5320.0	0.121

Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. The maximum net effective gain of any external 5 GHz antenna is 14 dBi. Certain external antennas have power output limitations and/or frequency band limitations as shown in filings under this FCC ID and must be professionally installed in order to meet the requirements of 15.15. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States

Date of Grant: 06/08/2005

Application Dated: 06/08/2005

Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	LDK102057

Name of Grantee:	Cisco Systems Inc

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 a/b/g Access Point
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15E	5180.0 - 5240.0	0.034
36 CC	15E	5260.0 - 5320.0	0.121

Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. The maximum net effective gain of any external 5 GHz antenna is 14 dBi. Certain external antennas have power output limitations and/or frequency band limitations as shown in filings under this FCC ID and must be professionally installed in order to meet the requirements of 15.15. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 5UOrABUdwZNqOrMiLhuupA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 07/28/2005

Application Dated: 07/28/2005

Cisco Systems Inc

125 West Tasman Drive

San Jose, CA 95134-1706

Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	LDK102057

Name of Grantee:	Cisco Systems Inc

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Air-AP1000 Series Dual Band 2.4/5 GHz Access Point

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15E	5180.0 - 5240.0	0.034
36 CC	15E	5260.0 - 5320.0	0.121

Alternate 2.4 GHz and 5 GHz antennas as described in this filing are included in this Class II permissive change filing. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. The maximum net effective gain of any external 2.4 GHz antenna is 13 dBi and for external 5 GHz antenna is 14 dBi. Certain external antennas have frequency band limitations as shown in filings under this FCC ID and must be professionally installed in order to meet the requirements of 15.15. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States

Date of Grant: 07/28/2005

Application Dated: 07/28/2005

Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	LDK102057

Name of Grantee:	Cisco Systems Inc

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Air-AP1000 Series Dual Band 2.4/5 GHz Access Point
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15E	5180.0 - 5240.0	0.034
36 CC	15E	5260.0 - 5320.0	0.121

Alternate 2.4 GHz and 5 GHz antennas as described in this filing are included in this Class II permissive change filing. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. The maximum net effective gain of any external 2.4 GHz antenna is 13 dBi and for external 5 GHz antenna is 14 dBi. Certain external antennas have frequency band limitations as shown in filings under this FCC ID and must be professionally installed in order to meet the requirements of 15.15. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 3LeBgSY3zDTR3X/sWbrceg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 04/12/2007

Application Dated: 04/12/2007

Cisco Systems Inc

125 West Tasman Drive

San Jose, CA 95134-1706

Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	LDK102057

Name of Grantee:	Cisco Systems Inc

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Air-AP1000 Series Dual Band 2.4/5 GHz Access Point

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15E	5180.0 - 5240.0	0.034

Grant conditions from original and subsequent filings if any under this FCC ID are applicable, also the following concerning this Class II permissive change: disable 5.260-5.320 GHz band via software. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. The maximum net effective gain of any external 2.4 GHz antenna is 13 dBi and for external 5 GHz antenna is 14 dBi. Certain external antennas have frequency band limitations as shown in filings under this FCC ID and must be professionally installed in order to meet the requirements of 15.15. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. .

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States

Date of Grant: 04/12/2007

Application Dated: 04/12/2007

Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	LDK102057

Name of Grantee:	Cisco Systems Inc

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Air-AP1000 Series Dual Band 2.4/5 GHz Access Point
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15E	5180.0 - 5240.0	0.034

Grant conditions from original and subsequent filings if any under this FCC ID are applicable, also the following concerning this Class II permissive change: disable 5.260-5.320 GHz band via software. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. The maximum net effective gain of any external 2.4 GHz antenna is 13 dBi and for external 5 GHz antenna is 14 dBi. Certain external antennas have frequency band limitations as shown in filings under this FCC ID and must be professionally installed in order to meet the requirements of 15.15. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. .

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.

Mail To:

EA519534

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 07/28/2005

Application Dated: 07/28/2005

Cisco Systems Inc

125 West Tasman Drive

San Jose, CA 95134-1706

Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	LDK102057

Name of Grantee:	Cisco Systems Inc

Equipment Class:	Digital Transmission System
Notes:	Air-AP1000 Series Dual Band 2.4/5 GHz Access Point

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15C	2412.0 - 2462.0	0.079
36 CC	15C	5745.0 - 5825.0	0.093

Alternate 2.4 GHz and 5 GHz antennas as described in this filing are included in this Class II permissive change filing. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. The maximum net effective gain of any external 2.4 GHz antenna is 13 dBi and for external 5 GHz antenna is 14 dBi. Certain external antennas have frequency band limitations as shown in filings under this FCC ID and must be professionally installed in order to meet the requirements of 15.15. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States

Date of Grant: 07/28/2005

Application Dated: 07/28/2005

Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	LDK102057

Name of Grantee:	Cisco Systems Inc

Equipment Class:	Digital Transmission System
Notes:	Air-AP1000 Series Dual Band 2.4/5 GHz Access Point
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
36 CC	15C	2412.0 - 2462.0	0.079
36 CC	15C	5745.0 - 5825.0	0.093

Alternate 2.4 GHz and 5 GHz antennas as described in this filing are included in this Class II permissive change filing. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. The maximum net effective gain of any external 2.4 GHz antenna is 13 dBi and for external 5 GHz antenna is 14 dBi. Certain external antennas have frequency band limitations as shown in filings under this FCC ID and must be professionally installed in order to meet the requirements of 15.15. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

36:	Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC:	This device is certified pursuant to two different Part 15 rules sections.

Mail To:

Air-AP1000 Series Dual Band 2.4/5 GHz Access Point

by Cisco Systems Inc

Grantee Code: LDK Product Code: 102057

Latest application date: 2007-04-12

FCC ID Device Details

Operating Frequencies

Exhibits

Application Information

Applications

Equipment Authorization

Grants

TCB Grant - Application T4XVibB2GciNcyneuRy6hg==

EAS Grant - Application T4XVibB2GciNcyneuRy6hg==

TCB Grant - Application h0SyA8syCVwHIR0FyAiQNg==

EAS Grant - Application h0SyA8syCVwHIR0FyAiQNg==

TCB Grant - Application 5UOrABUdwZNqOrMiLhuupA==

EAS Grant - Application 5UOrABUdwZNqOrMiLhuupA==

TCB Grant - Application 3LeBgSY3zDTR3X/sWbrceg==

EAS Grant - Application 3LeBgSY3zDTR3X/sWbrceg==

TCB Grant - Application 3AnRke8OKJlnM2moQbKo8g==

EAS Grant - Application 3AnRke8OKJlnM2moQbKo8g==