FCC ID LDK102063

802.11a Radio Module

by Cisco Systems Inc

Grantee Code: LDK   Product Code: 102063
Latest application date: 2008-04-28

FCC ID Device Details

FCC IDLDK102063
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeLDK
Product Code102063
Applicant BusinessCisco Systems Inc 🇺🇸
Related Domains cisco.com
Equipment Class802.11a Radio Module
Test FirmCisco Systems, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
4950-4980 MHzOriginal Equipment2008-04-28
5745-5825 MHzOriginal Equipment2007-07-20
5280-5320 MHzOriginal Equipment2007-07-20

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2008-04-28PDF 441.9 KB
Internal PhotosInternal Photos2008-04-28PDF 343.5 KB
External Photos and Label LocationExternal Photos2008-04-28PDF 351.9 KB
ID Label Location InfoID Label/Location Info2008-04-28PDF 351.9 KB
External PhotosExternal Photos2007-07-20PDF 351.9 KB
Test Setup PhotosTest Setup Photos2008-04-28PDF 1.1 MB
Test ReportTest Report2008-04-28PDF 348 KB
Test Report AddendumTest Report2008-04-28PDF 224.8 KB
Test ReportTest Report2007-07-20PDF 498.3 KB
Test ReportTest Report2007-07-20PDF 1.7 MB
filing admin. fault - see EMC test report for RFx infoRF Exposure Info2007-07-20PDF 41.3 KB
Confidentiality RequestCover Letter(s)2008-04-28PDF 13.5 KB
Grant Delay RequestCover Letter(s)2008-04-28PDF 13.2 KB
Limited Modular Approval RequestCover Letter(s)2008-04-28PDF 14.6 KB
Modular Transmitter Approval RequestCover Letter(s)2007-07-20PDF 14.6 KB
New ExhibitParts List/Tune Up Info2008-04-28PDF 41.3 KB
filing admin fault - see EMC reportRF Exposure Info2008-04-28PDF 41.3 KB

Application Information

Application ID2Y/5nggvHtnr0NkXp3HWvA==
Final Action Date2008-04-28
Application PurposeOriginal Equipment
Applicant FRN0004968939
Model102063
Frequency Range4950-4980 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device Description802.11a Radio Module
Responsible PartyGerard Thorpe, Manager, Engineering, gthorpe@cisco.com , 408-527-7097
Technical ContactJim Nicholson, Cisco Systems, jimnicho@cisco.com , 3305232094
Test FirmEddie Lam, Cisco Systems, Inc., gthorpe@cisco.com , 408-525-7602
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralYes
Grant Deferral Date06/15/2007
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartYes
Cognitive RadioYes
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Single Modular

Applications

Application IDDatePurpose
2Y/5nggvHtnr0NkXp3HWvA==2008-04-28Original Equipment
UtDUx5lXNCdtRh6G0XSm0w==2007-07-20Original Equipment
E2TO6M1peq7RH0nd/m1ZuQ==2007-07-20Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
4950-4980 MHz0.129000020.0000000000ppm16M7G1D90.210
5280-5320 MHz0.07915E
5500-5700 MHz0.07915E
5745-5825 MHz0.500000020.0000000000ppm15C

Grants

TCB Grant - Application UtDUx5lXNCdtRh6G0XSm0w==

This application does not exist.

EAS Grant - Application UtDUx5lXNCdtRh6G0XSm0w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 07/20/2007

Application Dated: 04/05/2007
 
Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDK102063
Name of Grantee:  Cisco Systems Inc
Equipment Class: Digital Transmission System
Notes: 802.11a Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 5745.0  -  5825.0 0.5 20.0  PM

Output power is conducted. Limited Modular Approval. Use in fixed-station conditions is permitted with antenna gain not exceeeding 17 dBi, as described in filing, with a minimum separation distance of 50 cm between the antenna and all persons during normal operation. Use in mobile RF exposure conditions is permitted with antenna gain not exceeding 8 dBi, as described in filing, with a minimum separation distance of 20 cm between the antenna and all persons during normal operation. Separate approval is required for all other operating configurations not described in filings under this FCC ID, including portable configurations with respect to 2.1093 and different antenna configurations. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must not be collocated nor operate in conjunction with any other antenna or transmitter within a host device, other than as described in filings under this FCC ID. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host-device configurations.



TCB Grant - Application E2TO6M1peq7RH0nd/m1ZuQ==

This application does not exist.

EAS Grant - Application E2TO6M1peq7RH0nd/m1ZuQ==

Mail To:
Jim Nicholson, EMC Compliance Engineer
Cisco Systems
4125 Highlander Parkway
Richfield, OH 44286
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 07/20/2007

Application Dated: 04/05/2007
 
Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDK102063
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5280.0  -  5320.0 0.079  
15E 5500.0  -  5700.0 0.079  

Output power is conducted. Limited Modular Approval. Use in fixed-station conditions is permitted with antenna gain not exceeeding 17 dBi, as described in filing, with a minimum separation distance of 50 cm between the antenna and all persons during normal operation. Use in mobile RF exposure conditions is permitted with antenna gain not exceeding 8 dBi, as described in filing, with a minimum separation distance of 20 cm between the antenna and all persons during normal operation. Separate approval is required for all other operating configurations not described in filings under this FCC ID, including portable configurations with respect to 2.1093 and different antenna configurations. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must not be collocated nor operate in conjunction with any other antenna or transmitter within a host device, other than as described in filings under this FCC ID. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host-device configurations.



TCB Grant - Application 2Y/5nggvHtnr0NkXp3HWvA==

This application does not exist.

EAS Grant - Application 2Y/5nggvHtnr0NkXp3HWvA==

Mail To:
Jim Nicholson, EMC Compliance Engineer
Cisco Systems
4125 Highlander Parkway
Richfield, OH 44286
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 04/28/2008

Application Dated: 04/05/2007
 
Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDK102063
Name of Grantee:  Cisco Systems Inc
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: 802.11a Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90.210 4950.0  -  4980.0 0.129 20.0  PM 16M7G1D

Output power is 90.205(r) conducted maximum. This FCC ID is a composite-application with Limited Modular Approval. Use in fixed and temporary-fixed station P2P or P2MP conditions is permitted with antenna gain not exceeeding 17 dBi, as described in filing, with a minimum separation distance of 50 cm between the antenna and all persons during normal operation. Use in mobile RF exposure conditions is permitted with antenna gain not exceeding 9 dBi, with a minimum separation distance of 20 cm between the antenna and all persons during normal operation. Separate approval is required for all other operating configurations not described in filings under this FCC ID, including portable configurations with respect to 2.1093 and different antenna configurations. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must not be collocated nor operate in conjunction with any other antenna or transmitter within a host device, other than as described in filings under this FCC ID. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host-device configurations.

Limited Single Modular



Mail To:
Jim Nicholson,
Cisco Systems
4125 Highlander Parkway
Richfield, OH 44286