FCC ID LDK102068
5.8GHz Radio Module
by Cisco Systems Inc
Grantee Code: LDK Product Code: 102068
Latest application date: 2009-01-30
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5745-5805 MHz | Class II permissive change or modification of presently authorized equipment | 2009-01-30 |
| 5745-5825 MHz | Original Equipment | 2008-02-06 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2009-01-30 | PDF 1.4 MB |
| Manual lwap 1 | Users Manual | 2008-02-06 | PDF 2.3 MB |
| Manual lwap 2 | Users Manual | 2008-02-06 | PDF 1.7 MB |
| Users Manual 1 | Users Manual | 2008-02-06 | PDF 2.6 MB |
| Users Manual 2 | Users Manual | 2008-02-06 | PDF 2.8 MB |
| Users Manual 3 | Users Manual | 2008-02-06 | PDF 2.6 MB |
| Internal Photos | Internal Photos | 2008-02-06 | PDF 181.9 KB |
| External Photos | External Photos | 2008-02-06 | PDF 624.8 KB |
| ID Label | ID Label/Location Info | 2008-02-06 | PDF 624.8 KB |
| Setup Photos | Test Setup Photos | 2009-01-30 | PDF 488.4 KB |
| Test Setup Photos | Test Setup Photos | 2008-02-06 | PDF 1.1 MB |
| Test Report | Test Report | 2009-01-30 | PDF 2.1 MB |
| Test Report | Test Report | 2008-02-06 | PDF 2.6 MB |
| Authorized Signatories | Cover Letter(s) | 2009-01-30 | PDF 196.4 KB |
| C2PC Letter | Cover Letter(s) | 2009-01-30 | PDF 13.4 KB |
| TCB Q and A | Cover Letter(s) | 2009-01-30 | PDF 119.1 KB |
| Authorization Letter | Cover Letter(s) | 2008-02-06 | PDF 12.5 KB |
| Modular Approval Letter | Cover Letter(s) | 2008-02-06 | PDF 16.6 KB |
| Request for Confidentiality | Cover Letter(s) | 2008-02-06 | PDF 15.5 KB |
| Antenna 1 | Parts List/Tune Up Info | 2009-01-30 | PDF 92.7 KB |
| Antenna 2 | Parts List/Tune Up Info | 2009-01-30 | PDF 968.3 KB |
| ant5114P | Parts List/Tune Up Info | 2008-02-06 | PDF 522.4 KB |
| ant5117S | Parts List/Tune Up Info | 2008-02-06 | PDF 743.9 KB |
| ant5180v | Parts List/Tune Up Info | 2008-02-06 | PDF 489.1 KB |
Application Information
| Application ID | O8BQ43x5D5S5ljvuSN41lQ== |
|---|---|
| Final Action Date | 2009-01-30 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0004968939 |
| Model | 102068 |
| Frequency Range | 5745-5805 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 5.8GHz Radio Module |
| Responsible Party | Gerard Thorpe, Manager, Engineering, gthorpe@cisco.com  , 408-527-7097 |
| Technical Contact | Jim Nicholson, Cisco Systems, Inc., jimnicho@cisco.com , 330-523-2094 |
| Non-Technical Contact | Jim Nicholson, Cisco Systems, Inc., jimnicho@cisco.com , 330-523-2094 |
| Test Firm | Eddie Lam, Cisco Systems, Inc., gthorpe@cisco.com , 408-525-7602 |
| TCB Email | mike.kuo@ccsemc.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Modular Approval. Power Output listed is Conducted. The antenna(s) used for this transmitter must not be co-located nor operate in conjunction with any other antenna or transmitter within a host device, except as described in filings under this FCC ID. The antenna(s) used for this transmitter must be professionally installed and fixed-mounted on outdoor permanent structures with a separation distance from all persons of at least 50 cm for antennas up to 17 dBi and 200 cm for antennas from 17-28 dBi. Antennas with gains higher than 6 dbi may be used only with reduced power or in fixed point-to-point installations as documented in this filing. Specific co-located transmitter operating conditions have been evaluated as shown in this application. Other antenna configurations may require separate approval. Compliance of this device in all final host configurations is the responsibility of the Grantee. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of section 1.1307(b)(3), for satisfying RF exposure and transmit power compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| O8BQ43x5D5S5ljvuSN41lQ== | 2009-01-30 | Class II permissive change or modification of presently authorized equipment |
| EAXIncBi35qjuQT8S6YBQQ== | 2008-02-06 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application O8BQ43x5D5S5ljvuSN41lQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 01/30/2009 Application Dated: 01/30/2009 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Gerard Thorpe , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK102068 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 5.8GHz Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 5745.0 - 5825.0 | 0.562 | |||
| 15C | 5745.0 - 5805.0 | 0.38 |
| Limited Modular Approval. Power Output listed is Conducted. The antenna(s) used for this transmitter must not be co-located nor operate in conjunction with any other antenna or transmitter within a host device, except as described in filings under this FCC ID. The antenna(s) used for this transmitter must be professionally installed and fixed-mounted on outdoor permanent structures with a separation distance from all persons of at least 50 cm for antennas up to 17 dBi and 200 cm for antennas from 17-28 dBi. Antennas with gains higher than 6 dbi may be used only with reduced power or in fixed point-to-point installations as documented in this filing. Specific co-located transmitter operating conditions have been evaluated as shown in this application. Other antenna configurations may require separate approval. Compliance of this device in all final host configurations is the responsibility of the Grantee. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of section 1.1307(b)(3), for satisfying RF exposure and transmit power compliance. |
EAS Grant - Application O8BQ43x5D5S5ljvuSN41lQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 01/30/2009 Application Dated: 01/30/2009 |
| Attention: Gerard Thorpe , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK102068 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 5.8GHz Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 5745.0 - 5825.0 | 0.562 | |||
| 15C | 5745.0 - 5805.0 | 0.38 |
| Limited Modular Approval. Power Output listed is Conducted. The antenna(s) used for this transmitter must not be co-located nor operate in conjunction with any other antenna or transmitter within a host device, except as described in filings under this FCC ID. The antenna(s) used for this transmitter must be professionally installed and fixed-mounted on outdoor permanent structures with a separation distance from all persons of at least 50 cm for antennas up to 17 dBi and 200 cm for antennas from 17-28 dBi. Antennas with gains higher than 6 dbi may be used only with reduced power or in fixed point-to-point installations as documented in this filing. Specific co-located transmitter operating conditions have been evaluated as shown in this application. Other antenna configurations may require separate approval. Compliance of this device in all final host configurations is the responsibility of the Grantee. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of section 1.1307(b)(3), for satisfying RF exposure and transmit power compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 02/06/2008 Application Dated: 02/06/2008 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Gerard Thorpe , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK102068 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 5.8GHz Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 | 15C | 5745.0 - 5825.0 | 0.562 |
| Limited Modular Approval. Power Output listed is Conducted. The antenna(s) used for this transmitter must not be co-located nor operate in conjunction with any other antenna or transmitter within a host device, except as described in filings under this FCC ID. The antenna(s) used for this transmitter must be professionally installed and fixed-mounted on outdoor permanent structures with a separation distance of at least 50 cm from all persons and with antenna gain not to exceed 17 dBi. Antennas with gains of 14 dBi and 17 dBi may be used only in fixed point-to-point installations. Specific co-located transmitter operating conditions have been evaluated as shown in this application. Other antenna configurations may require separate approval. Compliance of this device in all final host configurations is the responsibility of the Grantee. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of section 1.1307(b)(3), for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
EAS Grant - Application EAXIncBi35qjuQT8S6YBQQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 02/06/2008 Application Dated: 02/06/2008 |
| Attention: Gerard Thorpe , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK102068 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 5.8GHz Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 | 15C | 5745.0 - 5825.0 | 0.562 |
| Limited Modular Approval. Power Output listed is Conducted. The antenna(s) used for this transmitter must not be co-located nor operate in conjunction with any other antenna or transmitter within a host device, except as described in filings under this FCC ID. The antenna(s) used for this transmitter must be professionally installed and fixed-mounted on outdoor permanent structures with a separation distance of at least 50 cm from all persons and with antenna gain not to exceed 17 dBi. Antennas with gains of 14 dBi and 17 dBi may be used only in fixed point-to-point installations. Specific co-located transmitter operating conditions have been evaluated as shown in this application. Other antenna configurations may require separate approval. Compliance of this device in all final host configurations is the responsibility of the Grantee. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of section 1.1307(b)(3), for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| Mail To: |