FCC ID LDK102086

This application does not exist.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States

Date of Grant: 04/25/2013 Application Dated: 01/29/2013

Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	LDK102086
Name of Grantee:	Cisco Systems Inc
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Cisco Aironet 802.11ac Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0  -  5240.0	0.047973
CC MO	15E	5210.0  -  5210.0	0.017061
CC MO ND	15E	5260.0  -  5320.0	0.146893
CC MO ND	15E	5290.0  -  5290.0	0.018967
CC MO ND	15E	5500.0  -  5580.0	0.211349
CC MO ND	15E	5530.0  -  5530.0	0.053703
CC MO ND	15E	5660.0  -  5700.0	0.157398
CC MO ND	15E	5670.0  -  5670.0	0.136773

Output power is conducted. This device has 20, 40, and 80 MHz BW modes. Operation in 5.15-5.25 GHz band is for indoor use only. Outdoor operation is subject to the professional installation instruction requirements as described in the User Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application HbSRae4mBQQzlKkNzBHrOw==

EAS Grant - Application HbSRae4mBQQzlKkNzBHrOw==

Mail To:

Jim Nicholson,

Cisco Systems Inc

4125 Highlander Parkway

Richfield, OH 44286

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States

Date of Grant: 04/25/2013 Application Dated: 01/29/2013

Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	LDK102086
Name of Grantee:	Cisco Systems Inc
Equipment Class:	Digital Transmission System
Notes:	Cisco Aironet 802.11ac Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	5745.0  -  5825.0	0.20137

Output power is conducted. This device has 20, 40, and 80 MHz BW modes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:

Jim Nicholson,

Cisco Systems, Inc.

4125 Highlander Parkway

Richfield, OH 44286