FCC ID LDK102089P

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 09/25/2014 Application Dated: 09/21/2014

Cisco Systems Inc

125 West Tasman Drive

San Jose, CA 95134-1706

Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	LDK102089P
Name of Grantee:	Cisco Systems Inc
Equipment Class:	Digital Transmission System
Notes:	Cisco Aironet 1530 Series Outdoor Access Point

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.537
CC MO	15C	5745.0  -  5825.0	0.589

Class III permissive change to allow the device can change preconfigured regulatory domain scheme to an automatic self-configuring scheme. This device has 20 MHz and 40 MHz bandwidth modes. Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. Outdoor operation is subject to the professional installation instruction requirements as described in the Users Manual. When device is operated with antennas with less than 8 dBi gain, the antenna must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. When operated with antennas with up to 14 dBi gain, the antenna must be installed to provide a separation distance of 40 cm. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States

Date of Grant: 09/25/2014 Application Dated: 09/21/2014

Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	LDK102089P
Name of Grantee:	Cisco Systems Inc
Equipment Class:	Digital Transmission System
Notes:	Cisco Aironet 1530 Series Outdoor Access Point
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.537
CC MO	15C	5745.0  -  5825.0	0.589

Class III permissive change to allow the device can change preconfigured regulatory domain scheme to an automatic self-configuring scheme. This device has 20 MHz and 40 MHz bandwidth modes. Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. Outdoor operation is subject to the professional installation instruction requirements as described in the Users Manual. When device is operated with antennas with less than 8 dBi gain, the antenna must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. When operated with antennas with up to 14 dBi gain, the antenna must be installed to provide a separation distance of 40 cm. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application Q+GWLj1A5Z5pezP1OLQomQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 09/26/2014 Application Dated: 09/25/2014

Cisco Systems Inc

125 West Tasman Drive

San Jose, CA 95134-1706

Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	LDK102089P
Name of Grantee:	Cisco Systems Inc
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Cisco Aironet 1530 Series Outdoor Access Point

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO ND	15E	5280.0  -  5320.0	0.105
CC MO ND	15E	5500.0  -  5580.0	0.085
CC MO ND	15E	5680.0  -  5720.0	0.078

Class III permissive change to allow the device can change preconfigured regulatory domain scheme to an automatic self-configuring scheme. This device has 20 MHz and 40 MHz bandwidth modes. Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. Outdoor operation is subject to the professional installation instruction requirements as described in the Users Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States

Date of Grant: 09/26/2014 Application Dated: 09/25/2014

Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	LDK102089P
Name of Grantee:	Cisco Systems Inc
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Cisco Aironet 1530 Series Outdoor Access Point
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO ND	15E	5280.0  -  5320.0	0.105
CC MO ND	15E	5500.0  -  5580.0	0.085
CC MO ND	15E	5680.0  -  5720.0	0.078

Class III permissive change to allow the device can change preconfigured regulatory domain scheme to an automatic self-configuring scheme. This device has 20 MHz and 40 MHz bandwidth modes. Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. Outdoor operation is subject to the professional installation instruction requirements as described in the Users Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application p4XpB3rFjjtSfjjEQSvIgw==

EAS Grant - Application p4XpB3rFjjtSfjjEQSvIgw==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States

Date of Grant: 01/29/2014 Application Dated: 11/27/2013

Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	LDK102089P
Name of Grantee:	Cisco Systems Inc
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Cisco Aironet 1530 Series Outdoor Access Point
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO ND	15E	5280.0  -  5320.0	0.105
CC MO ND	15E	5500.0  -  5580.0	0.085
CC MO ND	15E	5680.0  -  5700.0	0.078

This device has 20 MHz and 40 MHz bandwidth modes. Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application c72MWnyuBCegaCo2/vARjA==

EAS Grant - Application c72MWnyuBCegaCo2/vARjA==

Mail To:

Jim Nicholson,

Cisco Systems Inc

4125 Highlander Parkway

Richfield, OH 44286

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States

Date of Grant: 01/29/2014 Application Dated: 11/27/2013

Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	LDK102089P
Name of Grantee:	Cisco Systems Inc
Equipment Class:	Digital Transmission System
Notes:	Cisco Aironet 1530 Series Outdoor Access Point
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.537
CC MO	15C	5745.0  -  5825.0	0.589

This device has 20 MHz and 40 MHz bandwidth modes. Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. When device is operated with antennas with less than 8 dBi gain, the antenna must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. When operated with antennas with up to 14 dBi gain, the antenna must be installed to provide a separation distance of 40 cm. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application C0b7HJcZzy0+GJC6eGa1PA==

Mail To:

Jim Nicholson,

Cisco Systems Inc

4125 Highlander Parkway

Richfield, OH 44286

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089

Date of Grant: 02/26/2016 Application Dated: 12/28/2015

Cisco Systems Inc

125 West Tasman Drive

San Jose, CA 95134-1706

Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	LDK102089P
Name of Grantee:	Cisco Systems Inc
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Cisco Aironet 1530 Series Outdoor Access Point

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5180.0  -  5240.0	0.123
38 CC MO ND	15E	5260.0  -  5320.0	0.105
38 CC MO ND	15E	5500.0  -  5720.0	0.085
38 CC MO	15E	5745.0  -  5825.0	0.331

Class III permissive change described in this filing. Output power listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States

Date of Grant: 02/26/2016 Application Dated: 12/28/2015

Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	LDK102089P
Name of Grantee:	Cisco Systems Inc
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Cisco Aironet 1530 Series Outdoor Access Point
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5180.0  -  5240.0	0.123
38 CC MO ND	15E	5260.0  -  5320.0	0.105
38 CC MO ND	15E	5500.0  -  5720.0	0.085
38 CC MO	15E	5745.0  -  5825.0	0.331

Class III permissive change described in this filing. Output power listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: