FCC ID LDK102090P

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 09/26/2014 Application Dated: 09/26/2014

Cisco Systems Inc

125 West Tasman Drive

San Jose, CA 95134-1706

Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	LDK102090P
Name of Grantee:	Cisco Systems Inc
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Cisco Aironet 802.11n Dual Band Mesh Access Points

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5260.0  -  5320.0	0.129
CC	15E	5310.0  -  5310.0	0.1
CC	15E	5500.0  -  5560.0	0.135
CC	15E	5660.0  -  5700.0	0.158
CC	15E	5510.0  -  5550.0	0.205

Class III permissive change to allow the device can change preconfigured regulatory domain scheme to an automatic self-configuring scheme. Output power is conducted. This device has 20 MHz and 40 MHz BW modes. Outdoor operation is subject to the professional installation instruction requirements as described in the Users Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States

Date of Grant: 09/26/2014 Application Dated: 09/26/2014

Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	LDK102090P
Name of Grantee:	Cisco Systems Inc
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Cisco Aironet 802.11n Dual Band Mesh Access Points
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5260.0  -  5320.0	0.129
CC	15E	5310.0  -  5310.0	0.1
CC	15E	5500.0  -  5560.0	0.135
CC	15E	5660.0  -  5700.0	0.158
CC	15E	5510.0  -  5550.0	0.205

Class III permissive change to allow the device can change preconfigured regulatory domain scheme to an automatic self-configuring scheme. Output power is conducted. This device has 20 MHz and 40 MHz BW modes. Outdoor operation is subject to the professional installation instruction requirements as described in the Users Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application qPZAEC5rqoDUVvIOevci4Q==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089

Date of Grant: 02/26/2016 Application Dated: 01/27/2016

Cisco Systems Inc

125 West Tasman Drive

San Jose, CA 95134-1706

Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	LDK102090P
Name of Grantee:	Cisco Systems Inc
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Cisco Aironet 802.11n Dual Band Mesh Access Points

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5180.0  -  5240.0	0.079
38 CC MO ND	15E	5260.0  -  5320.0	0.129
38 CC MO ND	15E	5500.0  -  5720.0	0.205
38 CC MO	15E	5745.0  -  5825.0	0.331

Class III permissive change described in this filing. Output power listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States

Date of Grant: 02/26/2016 Application Dated: 01/27/2016

Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	LDK102090P
Name of Grantee:	Cisco Systems Inc
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Cisco Aironet 802.11n Dual Band Mesh Access Points
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5180.0  -  5240.0	0.079
38 CC MO ND	15E	5260.0  -  5320.0	0.129
38 CC MO ND	15E	5500.0  -  5720.0	0.205
38 CC MO	15E	5745.0  -  5825.0	0.331

Class III permissive change described in this filing. Output power listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application pgYipyPx5Rn3RNn2Cj18iQ==

EAS Grant - Application pgYipyPx5Rn3RNn2Cj18iQ==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States

Date of Grant: 11/14/2013 Application Dated: 08/21/2013

Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	LDK102090P
Name of Grantee:	Cisco Systems Inc
Equipment Class:	Digital Transmission System
Notes:	Cisco Aironet 802.11n Dual Band Mesh Access Points
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.467
CC	15C	2412.0  -  2462.0	0.725
CC	15C	5745.0  -  5825.0	0.468
CC	15C	5755.0  -  5795.0	0.436

Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application nJDf6fCIU6JjV7S17Kk3uw==

Mail To:

Bud Chiller,

Cisco Systems Inc

4125 Highlander Parkway

Richfield, OH 44286

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 09/25/2014 Application Dated: 09/22/2014

Cisco Systems Inc

125 West Tasman Drive

San Jose, CA 95134-1706

Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	LDK102090P
Name of Grantee:	Cisco Systems Inc
Equipment Class:	Digital Transmission System
Notes:	Cisco Aironet 802.11n Dual Band Mesh Access Points

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.467
CC	15C	2412.0  -  2462.0	0.725
CC	15C	5745.0  -  5825.0	0.468
CC	15C	5755.0  -  5795.0	0.436

Class III permissive change to allow the device can change preconfigured regulatory domain scheme to an automatic self-configuring scheme. Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States

Date of Grant: 09/25/2014 Application Dated: 09/22/2014

Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	LDK102090P
Name of Grantee:	Cisco Systems Inc
Equipment Class:	Digital Transmission System
Notes:	Cisco Aironet 802.11n Dual Band Mesh Access Points
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.467
CC	15C	2412.0  -  2462.0	0.725
CC	15C	5745.0  -  5825.0	0.468
CC	15C	5755.0  -  5795.0	0.436

Class III permissive change to allow the device can change preconfigured regulatory domain scheme to an automatic self-configuring scheme. Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application lBLyGiHnmTCSXKEI8QbH6A==

EAS Grant - Application lBLyGiHnmTCSXKEI8QbH6A==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States

Date of Grant: 11/14/2013 Application Dated: 08/21/2013

Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	LDK102090P
Name of Grantee:	Cisco Systems Inc
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Cisco Aironet 802.11n Dual Band Mesh Access Points
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5260.0  -  5320.0	0.129
CC	15E	5310.0  -  5310.0	0.1
CC	15E	5500.0  -  5560.0	0.135
CC	15E	5660.0  -  5700.0	0.158
CC	15E	5510.0  -  5550.0	0.205

Output power is conducted. This device has 20 MHz and 40 MHz BW modes. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

Mail To:

Bud Chiller,

Cisco Systems Inc

4125 Highlander Parkway

Richfield, OH 44286