FCC ID LDK102092

Cisco Aironet 702W Series Access Points

by Cisco Systems Inc

Grantee Code: LDK   Product Code: 102092
Latest application date: 2016-02-26

FCC ID Device Details

FCC IDLDK102092
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeLDK
Product Code102092
Applicant BusinessCisco Systems Inc 🇺🇸
Related Domains cisco.com
Equipment ClassCisco Aironet 702W Series Access Points
Test FirmCisco Systems, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass III permissive change to software defined radio2016-02-26
5180-5240 MHzClass III permissive change to software defined radio2014-09-26
2412-2462 MHzClass III permissive change to software defined radio2014-09-25
5180-5240 MHzOriginal Equipment2014-01-29
2412-2462 MHzOriginal Equipment2014-01-29

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2014-09-26PDF 1.3 MB
ManualUsers Manual2014-01-29PDF 1.1 MB
Internal PhotosInternal Photos2014-01-29PDF 3.4 MB
External PhotosExternal Photos2014-01-29PDF 2.7 MB
LabelID Label/Location Info2014-09-26PDF 98.8 KB
Label and Label LocationID Label/Location Info2014-09-25PDF 98.8 KB
LabelID Label/Location Info2014-01-29PDF 611.3 KB
Test Setup Photo2Test Setup Photos2014-09-26PDF 386.1 KB
Test Setup Photo3Test Setup Photos2014-09-26PDF 167.5 KB
Test Setup photo1Test Setup Photos2014-09-26PDF 33.6 KB
Test Setup Photo1Test Setup Photos2014-09-25PDF 33.6 KB
Test setup photo2Test Setup Photos2014-09-25PDF 33.6 KB
Setup Photos 702W 2.4GHz ReportTest Setup Photos2014-01-29PDF 33.6 KB
Setup Photos 702W 5180-5240 ReportTest Setup Photos2014-01-29PDF 33.6 KB
Setup Photos 702W 5260-5320 ReportTest Setup Photos2014-01-29PDF 386.1 KB
Setup Photos 702W 5500-5700 ReportTest Setup Photos2014-01-29PDF 167.5 KB
Setup Photos 702W 5745-5825 ReportTest Setup Photos2014-01-29PDF 33.6 KB
DFS ReportTest Report2016-02-26PDF 2.2 MB
Test Report 5150-5250 MHzTest Report2016-02-26PDF 4.4 MB
Test Report 5725-5850 MHzTest Report2016-02-26PDF 4.7 MB
Tset Report 5700-5725 MHzTest Report2016-02-26PDF 3.1 MB
DFS Test ReportTest Report2014-09-26PDF 1.6 MB
RF Test Report1Test Report2014-09-26PDF 3.5 MB
RF Test Report2Test Report2014-09-26PDF 5.2 MB
RF Test Report3Test Report2014-09-26PDF 4.7 MB
RF Test Report4Test Report2014-09-26PDF 1 MB
RF Test Report2Test Report2014-09-25PDF 3.7 MB
RF Test Report3Test Report2014-09-25PDF 1 MB
RF Test report1Test Report2014-09-25PDF 4.2 MB
702W 2.4GHz ReportTest Report2014-01-29PDF 4.2 MB
702W 5180-5240 ReportTest Report2014-01-29PDF 3.5 MB
702W 5260-5320 ReportTest Report2014-01-29PDF 5.2 MB
702W 5500-5700 ReportTest Report2014-01-29PDF 4.7 MB
702W 5745-5825 ReportTest Report2014-01-29PDF 3.7 MB
702W FCC DFS ReportTest Report2014-01-29PDF 1.6 MB
702W conducted and Radiated emission test reportTest Report2014-01-29PDF 1 MB
Authorization LetterCover Letter(s)2016-02-26PDF 27.5 KB
CIIIPC LetterCover Letter(s)2016-02-26PDF 25.1 KB
Agent AuthorizationCover Letter(s)2014-09-26PDF 15.8 KB
C3PC Cover LetterCover Letter(s)2014-09-26PDF 13.3 KB
Confidentiality LetterCover Letter(s)2014-09-26PDF 13.8 KB
POA LetterCover Letter(s)2014-09-26PDF 27.5 KB
C3PC LetterCover Letter(s)2014-09-25PDF 13.3 KB
ConfidentialityCover Letter(s)2014-09-25PDF 13.8 KB
Confidentiality LetterCover Letter(s)2014-01-29PDF 13.8 KB
Signature Auth. LetterCover Letter(s)2014-01-29PDF 14.4 KB
RF Exposure Report 1RF Exposure Info2014-09-26PDF 101.4 KB
RF Exposure Report 2RF Exposure Info2014-09-26PDF 128.6 KB
RF Exposure Report 3RF Exposure Info2014-09-26PDF 96.7 KB
MPE 1RF Exposure Info2014-09-25PDF 97.2 KB
MPE 2RF Exposure Info2014-09-25PDF 100.8 KB
MPE 702W 2.4GHz ReportRF Exposure Info2014-01-29PDF 97.2 KB
MPE 702W 5180-5240 ReportRF Exposure Info2014-01-29PDF 101.4 KB
MPE 702W 5260-5320 ReportRF Exposure Info2014-01-29PDF 128.6 KB
MPE 702W 5500-5700 ReportRF Exposure Info2014-01-29PDF 96.7 KB
MPE 702W 5745-5825 ReportRF Exposure Info2014-01-29PDF 100.8 KB
Operational Description Metadata onlyOperational DescriptionPDF 1.1 MB
Operational Description _KDB Metadata onlyOperational DescriptionPDF 74.9 KB
Operational Description of SDR Software/Security Info Metadata onlySDR Software/Security InfPDF 1.1 MB
PAG Approved Metadata onlyOperational DescriptionPDF 41.9 KB
SDR Software Security Info Metadata onlySDR Software/Security InfPDF 50.2 KB

Application Information

Application ID0UjKdzwGKAdVLmBjr1mfsQ==
Final Action Date2016-02-26
Application PurposeClass III permissive change to software defined radio
Applicant FRN0004968939
Model102092
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionCisco Aironet 702W Series Access Points
Responsible PartySamuel Kim, Manager, Engineering, samukim@cisco.com , 408-527-1446
Test FirmGerald Thorpe, Cisco Systems, Inc., gthorpe@cisco.com , 408-525-7602
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioYes
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsClass III permissive change described in this filing. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes.

Applications

Application IDDatePurpose
0UjKdzwGKAdVLmBjr1mfsQ==2016-02-26Class III permissive change to software defined radio
AE27s+400m3L4Ok38le/zQ==2014-09-26Class III permissive change to software defined radio
mRjk6kQc+eqd4hyqC7hteA==2014-09-25Class III permissive change to software defined radio
mkPsM4Au7Yc0H/sQ+VqHeQ==2014-01-29Original Equipment
HytmIgV6OvGp/QOX8eTafw==2014-01-29Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.08915CCC, MO
2412-2462 MHz0.08915CMO
5180-5240 MHz0.0515E38, CC, MO
5180-5240 MHz0.0515ECC, MO
5260-5320 MHz0.09815E38, CC, MO, ND
5260-5320 MHz0.09815ECC, MO, ND
5500-5720 MHz0.10715E38, CC, MO, ND
5500-5580 MHz0.10715ECC, MO, ND
5660-5720 MHz0.10715ECC, MO, ND
5660-5700 MHz0.10715ECC, MO, ND
5745-5825 MHz0.11515CCC, MO
5745-5825 MHz0.11515CMO
5745-5825 MHz0.04615E38, CC, MO

Grants

TCB Grant - Application mRjk6kQc+eqd4hyqC7hteA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 09/25/2014

Application Dated: 09/21/2014
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDK102092
Name of Grantee:  Cisco Systems Inc
Equipment Class: Digital Transmission System
Notes: Cisco Aironet 702W Series Access Points
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.089  
CC MO 15C 5745.0  -  5825.0 0.115  

Class III permissive change to allow the device can change preconfigured regulatory domain scheme to an automatic self-configuring scheme. This device has 20 MHz and 40 MHz bandwidth modes. Output power is conducted. Outdoor operation is subject to the professional installation instruction requirements as described in the Users Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application mRjk6kQc+eqd4hyqC7hteA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 09/25/2014

Application Dated: 09/21/2014
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDK102092
Name of Grantee:  Cisco Systems Inc
Equipment Class: Digital Transmission System
Notes: Cisco Aironet 702W Series Access Points
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.089  
CC MO 15C 5745.0  -  5825.0 0.115  

Class III permissive change to allow the device can change preconfigured regulatory domain scheme to an automatic self-configuring scheme. This device has 20 MHz and 40 MHz bandwidth modes. Output power is conducted. Outdoor operation is subject to the professional installation instruction requirements as described in the Users Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application mkPsM4Au7Yc0H/sQ+VqHeQ==

This application does not exist.

EAS Grant - Application mkPsM4Au7Yc0H/sQ+VqHeQ==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 01/29/2014

Application Dated: 11/27/2013
 
Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDK102092
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cisco Aironet 702W Series Access Points
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.05  
CC MO ND 15E 5260.0  -  5320.0 0.098  
CC MO ND 15E 5500.0  -  5580.0 0.107  
CC MO ND 15E 5660.0  -  5700.0 0.107  

This device has 20 MHz and 40 MHz bandwidth modes. Output power is conducted. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operation in 5.15-5.25 GHz band is for indoor use only.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application HytmIgV6OvGp/QOX8eTafw==

This application does not exist.

EAS Grant - Application HytmIgV6OvGp/QOX8eTafw==

Mail To:
Jim Nicholson,
Cisco Systems Inc
4125 Highlander Parkway
Richfield, OH 44286
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 01/29/2014

Application Dated: 11/27/2013
 
Attention: Gerard Thorpe , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDK102092
Name of Grantee:  Cisco Systems Inc
Equipment Class: Digital Transmission System
Notes: Cisco Aironet 702W Series Access Points
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15C 2412.0  -  2462.0 0.089  
MO 15C 5745.0  -  5825.0 0.115  

This device has 20 MHz and 40 MHz bandwidth modes. Output power is conducted. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application AE27s+400m3L4Ok38le/zQ==

Mail To:
Jim Nicholson,
Cisco Systems Inc
4125 Highlander Parkway
Richfield, OH 44286
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 09/26/2014

Application Dated: 09/26/2014
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDK102092
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cisco Aironet 702W Series Access Points
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.05  
CC MO ND 15E 5260.0  -  5320.0 0.098  
CC MO ND 15E 5500.0  -  5580.0 0.107  
CC MO ND 15E 5660.0  -  5720.0 0.107  

Class III permissive change to allow the device can change preconfigured regulatory domain scheme to an automatic self-configuring scheme. This device has 20 MHz and 40 MHz bandwidth modes. Output power is conducted. Outdoor operation is subject to the professional installation instruction requirements as described in the Users Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operation in 5.15-5.25 GHz band is for indoor use only.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application AE27s+400m3L4Ok38le/zQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 09/26/2014

Application Dated: 09/26/2014
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDK102092
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cisco Aironet 702W Series Access Points
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.05  
CC MO ND 15E 5260.0  -  5320.0 0.098  
CC MO ND 15E 5500.0  -  5580.0 0.107  
CC MO ND 15E 5660.0  -  5720.0 0.107  

Class III permissive change to allow the device can change preconfigured regulatory domain scheme to an automatic self-configuring scheme. This device has 20 MHz and 40 MHz bandwidth modes. Output power is conducted. Outdoor operation is subject to the professional installation instruction requirements as described in the Users Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operation in 5.15-5.25 GHz band is for indoor use only.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 0UjKdzwGKAdVLmBjr1mfsQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 02/26/2016

Application Dated: 12/21/2015
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDK102092
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cisco Aironet 702W Series Access Points
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.05  
38 CC MO ND 15E 5260.0  -  5320.0 0.098  
38 CC MO ND 15E 5500.0  -  5720.0 0.107  
38 CC MO 15E 5745.0  -  5825.0 0.046  

Class III permissive change described in this filing. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application 0UjKdzwGKAdVLmBjr1mfsQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 02/26/2016

Application Dated: 12/21/2015
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDK102092
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cisco Aironet 702W Series Access Points
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.05  
38 CC MO ND 15E 5260.0  -  5320.0 0.098  
38 CC MO ND 15E 5500.0  -  5720.0 0.107  
38 CC MO 15E 5745.0  -  5825.0 0.046  

Class III permissive change described in this filing. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: