FCC ID LDK102098

Cisco Aironet 802.11ac Dual Band Access Points

by Cisco Systems Inc

Grantee Code: LDK   Product Code: 102098
Latest application date: 2020-02-27

Device Images

FCC ID Device Details

FCC IDLDK102098
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeLDK
Product Code102098
Applicant BusinessCisco Systems Inc 🇺🇸
Related Domains cisco.com
Equipment ClassCisco Aironet 802.11ac Dual Band Access Points
Test FirmCisco Systems, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-02-27
2412-2462 MHzOriginal Equipment2017-05-03
5180-5240 MHzOriginal Equipment2017-05-03

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2017-05-03PDF 1 MB
Users ManualUsers Manual2017-05-03PDF 1 MB
Int PhotosInternal Photos2017-05-03PDF 961.4 KB
Ext PhotosExternal Photos2017-05-03PDF 432.6 KB
FCC ID LabelID Label/Location Info2017-05-03PDF 204.4 KB
Setup PhotosTest Setup Photos2017-05-03PDF 381.1 KB
Test ReportTest Report2020-02-27PDF 3.6 MB
DFS ReportTest Report2017-05-03PDF 5.2 MB
Test ReportTest Report2017-05-03PDF 3.6 MB
Test Report 5150-5250 MHzTest Report2017-05-03PDF 3 MB
Test Report 5250-5350 MHzTest Report2017-05-03PDF 2.7 MB
Test Report 5470-5725 MHzTest Report2017-05-03PDF 3.5 MB
Test Report 5725-5850 MHzTest Report2017-05-03PDF 4 MB
Manufacturer Declaration LetterAttestation Statements2017-05-03PDF 73.7 KB
Authorization SignatureCover Letter(s)2020-02-27PDF 48.3 KB
C2PC LetterCover Letter(s)2020-02-27PDF 59.4 KB
Authorized signatureCover Letter(s)2017-05-03PDF 56.8 KB
Confidentiality LetterCover Letter(s)2017-05-03PDF 72.4 KB
RF ExposureRF Exposure Info2017-05-03PDF 131.1 KB
Block Diagram Metadata onlyBlock DiagramPDF 270.5 KB
Schematics Metadata onlySchematicsPDF 1.1 MB
Schemtics Metadata onlySchematicsPDF 1.1 MB
Antenna Spec Metadata onlyOperational DescriptionPDF 490.6 KB
DFS Expediated Review Request Metadata onlyOperational DescriptionPDF 79.1 KB
Operation Description Metadata onlyOperational DescriptionPDF 1.1 MB
PAG Approved Metadata onlyOperational DescriptionPDF 40.3 KB
PAG Re-Use Request Metadata onlyOperational DescriptionPDF 48.7 KB
Software Security Description Metadata onlyOperational DescriptionPDF 142.2 KB

Application Information

Application IDOggPlQmlOhYwDqZnoS6VWg==
Final Action Date2020-02-27
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0004968939
Model102098
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionCisco Aironet 802.11ac Dual Band Access Points
Responsible PartySamuel Kim, Manager, Engineering, samukim@cisco.com , 408-527-1446
Test FirmGerald Thorpe, Cisco Systems, Inc., gthorpe@cisco.com , 408-525-7602
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsClass II Permissive Change documented in this filing. Output power listed is maximum combined conducted power. This device is capable of 3x3 MIMO operations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes.

Applications

Application IDDatePurpose
OggPlQmlOhYwDqZnoS6VWg==2020-02-27Class II permissive change or modification of presently authorized equipment
l3gqLA+XQ399o2mmkOWf8Q==2017-05-03Original Equipment
YAqQS7DsfHIFY8RXWsvsCg==2017-05-03Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.204000015CCC, MO
5180-5240 MHz0.15815E38, CC, MO
5190-5230 MHz0.18215E38, CC, MO
5260-5320 MHz0.11715E38, CC, MO, ND
5270-5310 MHz0.19115E38, CC, MO, ND
5500-5720 MHz0.12915E38, CC, MO, ND
5510-5710 MHz0.18615E38, CC, MO, ND
5745-5825 MHz0.12915E38, CC, MO
5745-5825 MHz0.12915E49, CC, MO
5755-5795 MHz0.13515E38, CC, MO
5755-5795 MHz0.13515E49, CC, MO

Grants

TCB Grant - Application YAqQS7DsfHIFY8RXWsvsCg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 05/03/2017

Application Dated: 05/02/2017
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDK102098
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cisco Aironet 802.11ac Dual Band Access Points
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.158  
38 CC MO 15E 5190.0  -  5230.0 0.182  
38 CC MO ND 15E 5260.0  -  5320.0 0.117  
38 CC MO ND 15E 5270.0  -  5310.0 0.191  
38 CC MO ND 15E 5500.0  -  5720.0 0.129  
38 CC MO ND 15E 5510.0  -  5710.0 0.186  
49 CC MO 15E 5745.0  -  5825.0 0.129  
49 CC MO 15E 5755.0  -  5795.0 0.135  

Output power listed is maximum combined conducted power. This device is capable of 3x3 MIMO operations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
49: The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application YAqQS7DsfHIFY8RXWsvsCg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 05/03/2017

Application Dated: 05/02/2017
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDK102098
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cisco Aironet 802.11ac Dual Band Access Points
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.158  
38 CC MO 15E 5190.0  -  5230.0 0.182  
38 CC MO ND 15E 5260.0  -  5320.0 0.117  
38 CC MO ND 15E 5270.0  -  5310.0 0.191  
38 CC MO ND 15E 5500.0  -  5720.0 0.129  
38 CC MO ND 15E 5510.0  -  5710.0 0.186  
49 CC MO 15E 5745.0  -  5825.0 0.129  
49 CC MO 15E 5755.0  -  5795.0 0.135  

Output power listed is maximum combined conducted power. This device is capable of 3x3 MIMO operations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
49: The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application OggPlQmlOhYwDqZnoS6VWg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 02/27/2020

Application Dated: 02/27/2020
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDK102098
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cisco Aironet 802.11ac Dual Band Access Points
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.158  
38 CC MO 15E 5190.0  -  5230.0 0.182  
38 CC MO ND 15E 5260.0  -  5320.0 0.117  
38 CC MO ND 15E 5270.0  -  5310.0 0.191  
38 CC MO ND 15E 5500.0  -  5720.0 0.129  
38 CC MO ND 15E 5510.0  -  5710.0 0.186  
38 CC MO 15E 5745.0  -  5825.0 0.129  
38 CC MO 15E 5755.0  -  5795.0 0.135  

Class II Permissive Change documented in this filing. Output power listed is maximum combined conducted power. This device is capable of 3x3 MIMO operations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application OggPlQmlOhYwDqZnoS6VWg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 02/27/2020

Application Dated: 02/27/2020
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDK102098
Name of Grantee:  Cisco Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cisco Aironet 802.11ac Dual Band Access Points
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.158  
38 CC MO 15E 5190.0  -  5230.0 0.182  
38 CC MO ND 15E 5260.0  -  5320.0 0.117  
38 CC MO ND 15E 5270.0  -  5310.0 0.191  
38 CC MO ND 15E 5500.0  -  5720.0 0.129  
38 CC MO ND 15E 5510.0  -  5710.0 0.186  
38 CC MO 15E 5745.0  -  5825.0 0.129  
38 CC MO 15E 5755.0  -  5795.0 0.135  

Class II Permissive Change documented in this filing. Output power listed is maximum combined conducted power. This device is capable of 3x3 MIMO operations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application l3gqLA+XQ399o2mmkOWf8Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 05/03/2017

Application Dated: 05/02/2017
Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDK102098
Name of Grantee:  Cisco Systems Inc
Equipment Class: Digital Transmission System
Notes: Cisco Aironet 802.11ac Dual Band Access Points
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.204  

Output power listed is conducted. This device is capable of 3x3 MIMO operations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application l3gqLA+XQ399o2mmkOWf8Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 05/03/2017

Application Dated: 05/02/2017
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDK102098
Name of Grantee:  Cisco Systems Inc
Equipment Class: Digital Transmission System
Notes: Cisco Aironet 802.11ac Dual Band Access Points
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.204  

Output power listed is conducted. This device is capable of 3x3 MIMO operations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: