FCC ID LDK102108
Cisco Aironet 802.11ac Dual Band Access Points
by Cisco Systems Inc
Grantee Code: LDK Product Code: 102108
Latest application date: 2020-02-27
Device Images
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2020-02-27 |
| 5180-5240 MHz | Original Equipment | 2017-04-26 |
| 2402-2480 MHz | Original Equipment | 2017-04-26 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Guide | Users Manual | 2017-04-26 | PDF 1.2 MB |
| Users Manual | Users Manual | 2017-04-26 | PDF 1.2 MB |
| Int Photos | Internal Photos | 2017-04-26 | PDF 696.4 KB |
| Ext Photos | External Photos | 2017-04-26 | PDF 347.5 KB |
| FCC ID Label | ID Label/Location Info | 2017-04-26 | PDF 236.6 KB |
| Setup Photos | Test Setup Photos | 2017-04-26 | PDF 342 KB |
| Reference Report | Test Report | 2020-02-27 | PDF 3.4 MB |
| DSF Report | Test Report | 2017-04-26 | PDF 2.7 MB |
| Test Report 5150-5250 MHz | Test Report | 2017-04-26 | PDF 3.7 MB |
| Test Report 5250-5350 MHz | Test Report | 2017-04-26 | PDF 3.7 MB |
| Test Report 5500-5720 MHz | Test Report | 2017-04-26 | PDF 4.9 MB |
| Test Report 5745-5825 MHz | Test Report | 2017-04-26 | PDF 5.1 MB |
| Test Report BLE | Test Report | 2017-04-26 | PDF 4 MB |
| Test Report WiFi | Test Report | 2017-04-26 | PDF 5.2 MB |
| Authorization Signature | Cover Letter(s) | 2020-02-27 | PDF 48.3 KB |
| C2PC Letter | Cover Letter(s) | 2020-02-27 | PDF 59.4 KB |
| Declaration of using reference report | Cover Letter(s) | 2020-02-27 | PDF 52.1 KB |
| Authorized signature | Cover Letter(s) | 2017-04-26 | PDF 56.8 KB |
| Confidentiality Letter | Cover Letter(s) | 2017-04-26 | PDF 72.1 KB |
| RF Exposure | RF Exposure Info | 2017-04-26 | PDF 350.6 KB |
| Block Diagram Metadata only | Block Diagram | PDF 611.2 KB | |
| Schematics Metadata only | Schematics | PDF 702.9 KB | |
| Antenna SPec Metadata only | Operational Description | PDF 511.8 KB | |
| Antenna Spec Metadata only | Operational Description | PDF 511.8 KB | |
| Operation Description Metadata only | Operational Description | PDF 322.4 KB | |
| PAG Approved Metadata only | Operational Description | PDF 76.8 KB | |
| PAG Re-Use Request Metadata only | Operational Description | PDF 53.2 KB | |
| Software Security Description Metadata only | Operational Description | PDF 142.2 KB |
Application Information
| Application ID | 0vRRA+HbJbNtLA8VRdMDJw== |
|---|---|
| Final Action Date | 2020-02-27 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0004968939 |
| Model | 102108 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Cisco Aironet 802.11ac Dual Band Access Points |
| Responsible Party | Samuel Kim, Manager, Engineering, samukim@cisco.com  , 408-527-1446 |
| Test Firm | Gerald Thorpe, Cisco Systems, Inc., gthorpe@cisco.com , 408-525-7602 |
| TCB Email | bacl.regulatory@baclcorp.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Class II Permissive Change documented in this filing. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device is capable of 2x2 MIMO operations. Output power listed is conducted power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 0vRRA+HbJbNtLA8VRdMDJw== | 2020-02-27 | Class II permissive change or modification of presently authorized equipment |
| sdvlgvOZMbVNP7rN4H17CA== | 2017-04-26 | Original Equipment |
| /mNYCzYE2K63bH5xMMilhw== | 2017-04-26 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application sdvlgvOZMbVNP7rN4H17CA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 04/26/2017 Application Dated: 01/26/2017 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK102108 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Aironet 802.11ac Dual Band Access Points |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.102 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.089 | ||
| 38 CC MO ND | 15E | 5500.0 - 5720.0 | 0.091 | ||
| 49 CC MO | 15E | 5745.0 - 5825.0 | 0.068 |
| This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device is capable of 2x2 MIMO operations. Output power listed is conducted power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| 49: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application sdvlgvOZMbVNP7rN4H17CA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 04/26/2017 Application Dated: 01/26/2017 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK102108 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Aironet 802.11ac Dual Band Access Points |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.102 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.089 | ||
| 38 CC MO ND | 15E | 5500.0 - 5720.0 | 0.091 | ||
| 49 CC MO | 15E | 5745.0 - 5825.0 | 0.068 |
| This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device is capable of 2x2 MIMO operations. Output power listed is conducted power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| 49: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 02/27/2020 Application Dated: 02/27/2020 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK102108 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Aironet 802.11ac Dual Band Access Points |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.102 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.089 | ||
| 38 CC MO ND | 15E | 5500.0 - 5720.0 | 0.091 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.068 |
| Class II Permissive Change documented in this filing. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device is capable of 2x2 MIMO operations. Output power listed is conducted power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 0vRRA+HbJbNtLA8VRdMDJw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 02/27/2020 Application Dated: 02/27/2020 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK102108 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Aironet 802.11ac Dual Band Access Points |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.102 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.089 | ||
| 38 CC MO ND | 15E | 5500.0 - 5720.0 | 0.091 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.068 |
| Class II Permissive Change documented in this filing. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device is capable of 2x2 MIMO operations. Output power listed is conducted power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 04/26/2017 Application Dated: 04/26/2017 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK102108 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco Aironet 1815 Series 802.11ac Dual Band Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0024 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.091 |
| This device is capable of 2x2 MIMO operations. Output power is listed conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application /mNYCzYE2K63bH5xMMilhw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 04/26/2017 Application Dated: 04/26/2017 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK102108 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco Aironet 1815 Series 802.11ac Dual Band Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0024 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.091 |
| This device is capable of 2x2 MIMO operations. Output power is listed conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |