FCC ID LDK102112
Cisco Aironet 802.11ac Dual Band Access Points
by Cisco Systems Inc
Grantee Code: LDK Product Code: 102112
Latest application date: 2020-02-27
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2020-02-27 |
| 2402-2480 MHz | Original Equipment | 2017-07-05 |
| 5180-5240 MHz | Original Equipment | 2017-07-05 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual AP1800I | Users Manual | 2017-07-05 | PDF 1.2 MB |
| User Manual AP1800I | Test Setup Photos | 2017-07-05 | PDF 1.2 MB |
| User Manual AP1800S | Users Manual | 2017-07-05 | PDF 1.8 MB |
| Int Photos | Internal Photos | 2017-07-05 | PDF 425.9 KB |
| Ext Photos | External Photos | 2017-07-05 | PDF 488.6 KB |
| FCC ID Label | ID Label/Location Info | 2017-07-05 | PDF 322.6 KB |
| Setup Photos | Test Setup Photos | 2017-07-05 | PDF 396.9 KB |
| Test Report | Test Report | 2020-02-27 | PDF 1.5 MB |
| DFS Report | Test Report | 2017-07-05 | PDF 3 MB |
| Test Report 5250-5250 MHz | Test Report | 2017-07-05 | PDF 4.7 MB |
| Test Report 5250-5350 MHz | Test Report | 2017-07-05 | PDF 4.5 MB |
| Test Report 5470-5725 MHz | Test Report | 2017-07-05 | PDF 1.8 MB |
| Test Report 5745-5850 MHz | Test Report | 2017-07-05 | PDF 5.1 MB |
| Test Report BLE | Test Report | 2017-07-05 | PDF 2.7 MB |
| Test Report DTS | Test Report | 2017-07-05 | PDF 4.4 MB |
| Authorization Signature | Cover Letter(s) | 2020-02-27 | PDF 48.3 KB |
| C2PC Letter | Cover Letter(s) | 2020-02-27 | PDF 59 KB |
| Authorized signature | Cover Letter(s) | 2017-07-05 | PDF 56.8 KB |
| Confidentiality Letter | Cover Letter(s) | 2017-07-05 | PDF 72.4 KB |
| Product Similarity Declaration | Cover Letter(s) | 2017-07-05 | PDF 11.8 KB |
| RF Exposure | RF Exposure Info | 2017-07-05 | PDF 630.9 KB |
| Block Diagram Metadata only | Block Diagram | PDF 242.8 KB | |
| Schematics Metadata only | Schematics | PDF 715.4 KB | |
| Schemtics Metadata only | Schematics | PDF 715.4 KB | |
| Antenna Spec Metadata only | Operational Description | PDF 614.6 KB | |
| DFS Expedited Request Metadata only | Operational Description | PDF 75.6 KB | |
| Operation Description Metadata only | Operational Description | PDF 1.8 MB | |
| PAG Approved Metadata only | Operational Description | PDF 40.2 KB | |
| PAG Re-Use Request Metadata only | Operational Description | PDF 48.1 KB | |
| UNII Device Software Security Description Metadata only | Operational Description | PDF 142.2 KB |
Application Information
| Application ID | KmPZigA9Fy1ipBpai15ASg== |
|---|---|
| Final Action Date | 2020-02-27 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0004968939 |
| Model | 102112 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Cisco Aironet 802.11ac Dual Band Access Points |
| Responsible Party | Samuel Kim, Manager, Engineering, samukim@cisco.com  , 408-527-1446 |
| Test Firm | Gerald Thorpe, Cisco Systems, Inc., gthorpe@cisco.com , 408-525-7602 |
| TCB Email | bacl.regulatory@baclcorp.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Class II Permissive Change documented in this filing. Output power listed is maximum combined conducted power. This device is capable of 2x2 MIMO operations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| KmPZigA9Fy1ipBpai15ASg== | 2020-02-27 | Class II permissive change or modification of presently authorized equipment |
| yOdwBZNfHdTBqDFwZ0pXwQ== | 2017-07-05 | Original Equipment |
| u/dty+4V04Bm6VtgsVuKbQ== | 2017-07-05 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application yOdwBZNfHdTBqDFwZ0pXwQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 07/05/2017 Application Dated: 06/27/2017 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK102112 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco Aironet 802.11ac Dual Band Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.041 |
| This device is capable of 2x2 MIMO operations. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application yOdwBZNfHdTBqDFwZ0pXwQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 07/05/2017 Application Dated: 06/27/2017 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK102112 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Cisco Aironet 802.11ac Dual Band Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.041 |
| This device is capable of 2x2 MIMO operations. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 07/05/2017 Application Dated: 06/27/2017 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK102112 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Aironet 802.11ac Dual Band Access Points |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.036 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.038 | ||
| 38 CC MO ND | 15E | 5500.0 - 5720.0 | 0.046 | ||
| 49 CC MO | 15E | 5745.0 - 5825.0 | 0.044 |
| Output power listed is maximum combined conducted power. This device is capable of 2x2 MIMO operations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| 49: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application u/dty+4V04Bm6VtgsVuKbQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 07/05/2017 Application Dated: 06/27/2017 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK102112 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Aironet 802.11ac Dual Band Access Points |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.036 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.038 | ||
| 38 CC MO ND | 15E | 5500.0 - 5720.0 | 0.046 | ||
| 49 CC MO | 15E | 5745.0 - 5825.0 | 0.044 |
| Output power listed is maximum combined conducted power. This device is capable of 2x2 MIMO operations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| 49: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 02/27/2020 Application Dated: 02/27/2020 |
| Cisco Systems Inc |
| 125 West Tasman Drive |
| San Jose, CA 95134-1706 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK102112 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Aironet 802.11ac Dual Band Access Points |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.036 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.038 | ||
| 38 CC MO ND | 15E | 5500.0 - 5720.0 | 0.046 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.044 |
| Class II Permissive Change documented in this filing. Output power listed is maximum combined conducted power. This device is capable of 2x2 MIMO operations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application KmPZigA9Fy1ipBpai15ASg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems Inc 125 West Tasman Drive San Jose, CA 95134-1706 United States |
Date of Grant: 02/27/2020 Application Dated: 02/27/2020 |
| Attention: Samuel Kim , Manager, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | LDK102112 |
| Name of Grantee: | Cisco Systems Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cisco Aironet 802.11ac Dual Band Access Points |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.036 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.038 | ||
| 38 CC MO ND | 15E | 5500.0 - 5720.0 | 0.046 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.044 |
| Class II Permissive Change documented in this filing. Output power listed is maximum combined conducted power. This device is capable of 2x2 MIMO operations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |